We have launched the special page for Sanwa's compact pneumatic equipment.

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

The Kolder is a simplified spot cooler that applies the principle of vortex. Without using a power supply or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, in the case of model 190-75SV) simply by connecting compressed air. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it demonstrates excellent effectiveness, especially in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Additionally, the cooling effect on workpieces and tools leads to improved cutting speeds and extended tool life, making it particularly suitable for dry cutting of magnesium alloys. Furthermore, it is effectively utilized as a cooling source for various spot cooling applications, including preventing heat-related issues in electrical control boxes and various measuring instrument boxes, cooling molds, and cooling tests for semiconductors and PC boards. *For more details, please refer to the basic information and downloadable materials at the bottom of the page.

• Pneumatic Equipment

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Other environmental equipment

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist.

• Pneumatic Equipment

This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly in 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Pneumatic Equipment

The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in product selection. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Hydraulic Equipment

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device.

• nozzle

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

The jet blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose, it can be used for dust collection and recovery of debris, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose, it can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris.

• Pneumatic Equipment

"Blow," "drain," "dry" - spot blow with amplified air.

This is a blow nozzle that ranges from air volume amplification type to high thrust type. Air volume focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of aluminum, stainless steel Thrust focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of stainless steel

• nozzle

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.

Notice of participation in the "IT Trend EXPO 2026 Spring" (the largest online exhibition in Japan) from March 3 (Tue) to March 7 (Sat). ◆ IT Trend EXPO 2026 Spring Event Overview ◆ Name: IT Trend EXPO 2026 Spring Theme: New encounters will change tomorrow's "work" Date: March 3 (Tue) - 7 (Sat), 2026 Location: Online Participation Fee: Free Registration: Please apply from the URL below Meiden VR Safety Experience Education: https://it.expo.it-trend.jp/key/xpgi2xce Safety Information Portal: https://it.expo.it-trend.jp/key/3r6vr3bw

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.