Sonic Corporation Blower & Air Knife System for Can Water Removal (Example of SMART TUNNEL Usage)

"Sonic" drying is Sonic! We are introducing success stories and photos. [Simplified version]

This is a case study collection of Sonic Corporation's blower air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [removal of residues on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, and removal of residual water after cleaning contact lens pallets. We also present photographs. For more details, please contact us or refer to the catalog. We also have demo units available. You can try them in your factory! Alternatively, we can conduct simple tests at our company! Please consider it!

• Drying Equipment

"Sonic" water drainage drying is Sonic!! We are introducing case studies, conceptual installation diagrams, and photos.

This is a case study of Sonic Corporation's blower and air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, contamination of fine particles due to static electricity in clean rooms, and removal of residual water after cleaning contact lens pallets. We also present conceptual installation diagrams and photos. For more details, please contact us or refer to our catalog. We also have demo units available. You can try them at your factory! Alternatively, we can conduct simple tests at our company! Please consider it!

• Drying Equipment

Powerful air at over 25m/s for water removal and drying! Additionally, time-saving and energy-efficient! Comprehensive catalog available.

The Sonic Corporation's "Blower & Air Knife" is a device that dramatically improves the efficiency of processes such as part drying, food processing drying, and blowing off water droplets. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! While achieving an energy reduction effect of 75% compared to compressed air, the water removal efficiency exceeds 95%, resulting in significant energy savings. 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with low horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that far exceed those of compressors * A comprehensive catalog is available for download. Please check it out from "Download." * Demo units are also available for loan! Please apply from "Contact." Note: There is a limited number of demo units, so please act quickly!

• nozzle
• Food Cleaning Equipment
• Air Curtain

Are you having trouble with the essential "water droplet removal and drying process" after cleaning? We will provide you with a booklet that includes case studies on solving post-cleaning issues across various industries!

Are you having trouble with the blow process using air? There is always a cleaning process for parts (such as components) and products (like PET bottles and retort pouches). Following that process, there is always a drying process. I have heard that this drying is an eternal theme. Shall we finally resolve this eternal theme? Sonic's blowers and air knives efficiently and economically solve problems with high air volume and high-speed air! ▼ A job that required a pressure of 0.4 MPa can be achieved with just 29 kPa! ▼ When comparing the airflow of a compressor and a Sonic blower, to achieve an airflow of 7 m³/min, a compressor requires 62.5 horsepower. In contrast, the Sonic blower can achieve this with only 4 horsepower. The difference is significant compared to compressors and domestic blowers! In "Air Knife Trivia," we have numerous case studies for problem-solving. 【Case Studies】 ■ Automotive industry case studies ■ Food and beverage industry case studies ■ Pharmaceutical industry case studies ■ Steel industry case studies, etc. *For more details, please request materials or view the PDF data from the download.

• nozzle
• Pneumatic Equipment
• Other drying equipment

Sonic Corporation's blower and air knife use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blower! Demo units available for loan!

Are there any issues with the water drainage and drying processes for beverages, food, food processing, etc., or with blowing off water droplets from cans, bottles, and PET bottles? ------ Such problems can be efficiently and economically solved by the Sonic Air Knife System's high air volume and high-speed air! Tasks that previously required pressure like that of a compressor can now be achieved with just 29 kPa! When comparing the air volume of a compressor and a Sonic Blower, obtaining an air volume of 7 m³/min requires 62.5 horsepower with a compressor, while the Sonic Blower achieves this with only 4 horsepower. The difference is significant compared to compressors and domestic blowers! 【Features】 ● Energy-saving effect reduces consumption by 75% compared to compressor air ● Water drainage efficiency of over 95% ● Generates large volumes of air with low horsepower ● The air is clean and dry, promoting evaporation with warm air at about 40°C ● Energy-efficient (compared to compressors) ● Lightweight and compact design *Demo units are available for loan, so please feel free to contact us. Additionally, if you can provide samples, we will conduct tests at our company.

• nozzle
• Pneumatic Equipment
• Other drying equipment

Third installment! For those who have been unable to solve problems until now... Here are numerous case studies for problem-solving!

Are there any issues with the food processing drying process or the blowing off of water droplets from cans/bottles? The Sonic Air Knife System, with its high volume and high-speed air, efficiently and economically solves such problems! Tasks that required a pressure of 0.4 MPa can now be achieved with just 15-20 kPa! When comparing the airflow of a compressor and a Sonic blower, obtaining an airflow of 7 m³/min requires 60 HP (53 kW) with a compressor. In contrast, the Sonic blower achieves this with only 5 HP (3.7 kW). The difference is significant compared to compressors and domestic blowers! For those who have been unable to resolve issues until now… we have numerous case studies for you! 【Case Studies】 - Examples for the food/beverage industry - Examples for the automotive industry - Examples for the pharmaceutical industry - Examples for the steel industry, etc. *For more details, please refer to the PDF materials or feel free to contact us. *We also have a collection of case studies that we send out regularly. If you have any requests, please feel free to reach out to our staff.

• nozzle
• Pneumatic Equipment
• Hot air dryer

Blow away water, dust, and dirt from parts with high-speed air and dry quickly. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than compressors or domestic blowers. Additionally, one of the greatest features of the Sonic air knife system is that it is very economical, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if you need a hose.

• Pneumatic Equipment

By rotating the air knife, even complex shapes can be optimally drained/dried!

A rotary air knife that seems like it should exist but doesn't The Sonic Corporation's rotary air knife (patented) has been developed for draining (blow-off) and drying parts with complex shapes. The gaps in the air knife are angled at 15° relative to the rotating axis, allowing it to eject high-speed air while changing the blowing surface at regular intervals for the areas that require draining or drying. This effectively drains and dries the uneven surfaces and sides of the workpiece, as a single air knife passes over the workpiece multiple times. The rotary air knife can reduce energy costs compared to draining/drying done by multiple air knives. Additionally, it saves space since the installation of multiple air knives is unnecessary.

• Pneumatic Equipment

Improved air knife of the traditional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. One of its greatest features is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

• Hydraulic Equipment

A specialized blower for draining/drying that uses a small motor to spin at high speed and create a large airflow!

Powerful air at over 25 m/s for water removal and drying! Furthermore, time-saving and energy-efficient! Sonic Corporation's "Blower & Air Knife" is a device that dramatically improves the efficiency of parts drying, food processing drying, and blowing away water droplets. Processes requiring 400 kPa of pressure can be achieved with an ultra-high efficiency of just 29 kPa! While achieving a 75% reduction in energy compared to compressed air, the water removal efficiency exceeds 95%, resulting in significant energy savings. ≪Sonic Corporation's Spiral Blower≫ 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that greatly exceed those of compressors △▽△Basic Information△▽△ 【Product Lineup】 ■ Spiral Blower Using unique technology, it generates a large volume of air with energy efficiency compared to compressors and conventional blowers. The generated large volume of air can be supplied continuously without pulsation. The structure is also easy to maintain.

• Pneumatic Equipment

Non-contact water removal and drying of wire cables using Sonic Corporation's blower and air knife.

We would like to introduce a successful application of the Sonic SP Dryer cable drying machine. A manufacturer of low-voltage wires and cables, as well as bare aluminum and copper wires, needed to install a spark tester before the final packaging process. This meant that the wire, running at 3000 feet per minute (900 m/min), had to be completely dried before the spark test. Due to the rapid increase in line speed, traditional methods became costly and inefficient. If the cable is not completely dried, the inspection machine may misidentify it as defective. Because of the high-speed production at 3000 feet per minute (900 m/min), Sonic recommended the SP dryer. This is a drying device housed in a box that features energy-saving air knife technology (XE 42” long) with a centrifugal blower (Sonic 150, 20 horsepower). For more details, please contact us or refer to our catalog.

• nozzle
• Pneumatic Equipment
• Drying Equipment

Seeing is believing! Improve drying and reduce running costs by using a high-speed air knife to blow off air discharged from a high-volume blower!

Is there any problem with the Sonic food processing drying process and the blowing off of water droplets from cans/bottles? After sterilization and filling, it is also used for draining water before printing expiration dates on PET bottle caps, cans, retort packs, and for drying transport boxes. It is utilized in various industries, not only in the food industry but also for draining and drying automotive parts, steel plates and pipes, and semiconductor components. The Sonic Air Knife System's high airflow and high-speed air efficiently and economically solve these problems! For those who have not been able to resolve issues until now… we have numerous case studies for problem-solving! ***Videos will be updated regularly*** [Case Studies] - Examples for the food/beverage industry - Examples for the automotive industry - Examples for the pharmaceutical industry - Examples for the steel industry, etc. For more details, please contact us or download the catalog.

• nozzle
• Pneumatic Equipment
• Hot air dryer

The low-voltage fuse "BFMN" is a small blade fuse used to protect the electrical circuits of automobiles. When the current increases abnormally, the fuse blows to prevent damage to equipment and wiring. It is recommended for those facing challenges related to circuit protection with low-voltage fuses (below DC 70V) in the automotive and construction machinery industries. It is suitable for protecting circuits of electrical components, comfort equipment, safety devices, and control systems.

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The low-voltage fuse "BFSL" is a compact safety component used to protect automotive electrical circuits. It prevents equipment and wiring failures by blowing the fuse when the current increases abnormally. This low-voltage fuse is recommended for those facing challenges related to circuit protection in the automotive and construction machinery industries, as well as for low-voltage fuses (below DC 70V). It is used for circuit protection of comfort features such as car navigation systems, audio systems, ETC, air conditioning, and seat heaters.