The battery-operated compact Wi-Fi vibration sensor "Conan Air" for simple diagnosis has been featured in the Chubu Economic Newspaper.

Unexpected equipment shutdown... sudden maintenance... Are your predictive maintenance measures for equipment devices foolproof? A compact WiFi vibration sensor that can be easily measured with a smartphone!

Conan Air is a compact Wi-Fi vibration sensor for simple diagnostics. - Conan Air Official Website https://conanair.com/japan/ When it comes to vibration measurement, it is an important factor in the preventive maintenance of equipment, but it typically incurs labor costs and man-hours. The vibration sensor solves this issue and is a step towards smart factory implementation. Compared to conventional products, Conan Air has a strong cost advantage, but its most notable feature is that anyone can easily connect it to a tablet or smartphone via a browser. Additionally, it supports up to 1 kilohertz while being palm-sized and is praised for its overwhelming ease of introduction at just 30,000 yen per unit. - Features Capable of measuring vibrations in multiple locations with one unit (manual mode) Fully automated measurement without manual labor using multiple units (automatic mode) The saved data format for automatic mode and manual mode is the same, making trend management easy Fully automated measurement (automatic mode) can gradually increase the number of units used IoT systems utilizing the cloud and AI-based anomaly diagnosis systems are also available - You can try Conan Air for free. Please feel free to contact us.

• Vibration Monitoring

Easily display a large amount of waveform data! Possible to detect machine abnormalities in advance.

The "conandesse" from Chuo Electric Industrial Co., Ltd. is a waveform analysis device that can detect machine abnormalities in advance by analyzing and judging the current and vibrations produced by the machinery through waveform analysis. It aligns and extracts cycle waveforms, displaying density distributions in color. It allows for easy analysis of large amounts of data. Since it can detect signs of trouble before they occur, it can identify drill breakage or chipping in advance, enabling use until the tool's lifespan limit. Furthermore, this product received the 2020 TPM Excellent Product Award (Development Award) from the Japan Plant Maintenance Association. 【Features】 ■ Clear display of waveform data ■ Easy analysis of large amounts of data ■ Detection of signs of trouble before they occur ■ Compact and low-cost ■ Customizable You can try Conan Air for free for 30 days. Please feel free to contact us.

• Vibration Monitoring

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.