We will exhibit at the 2nd High-Performance Coatings Exhibition from December 4 to 6, 2019.

The adoption of electrostatic coating technology significantly reduces paint costs and improves productivity.

We would like to introduce a case study of our electrostatic painting machine, "Nano Gun." With the introduction of the product, the production cycle time improved from 5 minutes to 4 minutes, resulting in a 20% increase in productivity and enhanced coating efficiency. Additionally, the elimination of the need for skilled workers has made it easy for anyone to perform painting. 【Case Study】 ■ Client: Compressor Manufacturer ■ 2 Coats - Primer (Air Spray) - Base (Air Spray → Electrostatic Air Spray) *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

A rich lineup from simple mixing to high-precision mixing! These products maintain high mixing accuracy while enhancing cleanability and maintainability.

Inject Mix Technology is a system that directly feeds measured hardener into the mixer as the main agent for continuous quantitative supply. This enables high-precision mixing. Both the main agent and hardener pass through a static mixer in the fluid pathway, eliminating the need for premixing. - Simple design considering cleaning: Improved maintenance - Achieves a highly accurate mixing ratio - Different injector sizes: Optimizes the amount of hardener fed Pulse-Free Electronic Control (PFE) is a unique liquid mixing technology that ensures consistent measurement for precise dosing. PFE technology guarantees consistent measurement even during pump switching. - The pump does not switch during feeding, maintaining high-precision dosing - Pulsation-free: No impact on the spray pattern - Mixing accuracy is ±1% *For more details, please download the catalog or contact us.

• Painting Machine

Low-pressure design using chip design and processing technology for fine particle size without static electricity. Reduction in paint usage. A low-cost entry model that achieves a 10 to 1 small pump.

Significant reduction in paint loss with small investments (up to 30% reduction in paint usage compared to air spray). Shortened painting and cleaning times lead to early investment recovery and reduced health risks for staff due to decreased solvent use. 【Features】 - Easily paint hard-to-reach areas, such as the corners of boxes, where paint tends to bounce back. - Extremely minimized overspray and improved work efficiency due to high penetration. - Paint particle speed is controlled to minimize overspray. Utilizing secondary micro-particle technology, our unique method maximizes the control of paint particle speed. The air mix pump set allows for immediate painting once air is supplied! It’s a simple painting gun and pump set that anyone can use. 【Example of Set Contents】 - Air mix painting hand gun (for 120 bar) - 10:1 pump - Hose (7.5 m) - Suction rod - Nozzle tip (0609 size) The latest air mix technology achieves both high paint application efficiency and high film quality. Please compare it with other manufacturers. ★ We are available for demonstrations anytime, anywhere. (Flow rate of 40-120 cc per minute) *For more details, please download the catalog or contact us. *Similar technologies (AA, air assist, air lap, air airless, air coat)

• Painting Machine

Achieving high coating efficiency with the unique new technology of swirling flow and the W effect of the nozzle! A spray gun capable of handling complex shapes.

The "FPRO Air Spray" is a pressure-fed manual gun that allows for easy professional painting. Thanks to its unique technology, it significantly reduces the scattering speed of paint particles, greatly improving coating efficiency. Additionally, the vortex technology enhances the penetration of paint particles, making it possible to paint objects with complex shapes. 【Features】 ■ Easy to operate ■ Achieves a high coating efficiency of 78% ■ Three air caps ■ Abundant accessories *For more details, please refer to the PDF document or feel free to contact us.

• spray

Lightweight design focused on handling! A spray gun with an astonishing electrostatic coating efficiency of up to 86% (±2%).

The "Nano Gun Air Mix" is an electrostatic manual spray gun designed with a minimal number of parts, allowing anyone to use it immediately after installation without complicated adjustments. This product, which has undergone improvements, boasts excellent efficiency as a non-electrostatic painting spray technology, achieving a high coating efficiency of up to 86% (±2%). With outstanding finishing capabilities, high reliability, and a design based on advanced ergonomics, it has also achieved success in other markets that demand strict standards, such as railways, aerospace, renewable energy, machine tools, and other general work. 【Features】 ■ High-quality finish ■ High productivity due to high coating efficiency ■ A wide variety of rich tip types ■ Pursuit of comfort based on ergonomics, contributing to fatigue reduction ■ Easy maintenance *For more details, please refer to the PDF materials or feel free to contact us. *Similar technologies (AA, air assist, air wrap, air airless, air coat)

• spray

Easy maintenance with minimal component configuration! For automobiles, civil engineering machinery, and solar energy!

The "Lexon Pump" is an air-driven pump for high-viscosity materials in a single-component format. With continuous high discharge capacity, it reduces painting time compared to cartridge-based painting. It is also easy to use, just like cartridge-based painting. It has a simple structure with few components, making maintenance easy. 【Features】 ■Improves productivity ■Suitable for high-viscosity materials up to 100 centipoise ■Modular design ■Simple structure ■Cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Unique air mix technology! Achieves high coating efficiency with a tulip pattern spray shape.

The "Air Mix XCITE" is a manual spray gun suitable for spraying complex-shaped parts, featuring a precise pattern width adjustment knob. With the VX24 Air Mix air cap equipped with the "EZ Adjust" function, accurate positioning of the air cap can be achieved with simple operation. Additionally, the built-in filter minimizes pressure loss across various paint viscosities, ensuring stable coating efficiency. 【Features】 ■ Exceptional spray quality and uniform coating ■ Lower paint pressure compared to similar products, reducing overspray ■ Excellent atomization allows for spraying a wide range of materials ■ Ergonomically designed to reduce the risk of R.S.I. (Repetitive Strain Injury) *For more details, please refer to the PDF document or feel free to contact us. *Similar technologies (AA, Air Assist, Air Wrap, Air Airless, Air Coat)

• spray

Ideal for water-based paints! A compact electrostatic bell spray gun suitable for various painting applications.

The "Akyubel 709 Evo" is a robotic painting machine for water-based and solvent-based paints. The docking station can be installed while utilizing the existing paint circulation system. It prepares the next color in a transfer tank during painting, enabling quick color changes and minimal paint loss. Additionally, it adopts an internal electrostatic painting method, making it suitable for water-based paints. 【Features】 ■ Color change block is outside the booth ■ Quick color change ■ Prepares the next color in a transfer tank during painting ■ Ultra-precise discharge volume control possible +/-1cc/min ■ Minimal paint loss (0cc for the same color, 12cc during color change) *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine

For abrasives and UV coatings! Achieving precise film thickness management.

The "Air Mix AVX/ATX" is an automatic spray gun series that achieves high coating efficiency through Air Mix technology. It features two independent springs that automatically release secondary atomization air before primary atomization. Additionally, it allows for easy assembly, installation, and disassembly, providing excellent maintenance capabilities. The internal piping made of stainless copper accommodates a variety of materials, from solvents to water-based paints. 【Features】 ■ Simple structure with fewer parts ■ Extremely compact and lightweight design ■ Excellent maintenance and cleaning capabilities ■ Uses Luron seals (AVX) ■ Uses GT seals (ATX) *For more details, please refer to the PDF materials or feel free to contact us. *Similar technologies (AA, air assist, air wrap, air airless, air coat)

• Painting Machine

Contributes to reducing maintenance costs! Extremely lightweight automatic airless gun.

This product is an airless automatic spray gun that offers excellent atomization at medium or high flow rates while minimizing paint waste. It is an extremely lightweight automatic airless gun in the industry with a base plate design, which helps reduce bearing fatigue on automatic machines that carry the painting equipment. Additionally, its compact design allows for easy access to tight spaces. It is suitable for applying harsh coatings (acid catalysts, UV coatings), water-based materials, high-viscosity substances, and abrasives. 【Features】 ■ Auto gun in the market that reduces fatigue on painting equipment ■ Compact design for easy integration ■ Quick maintenance and simple assembly (only 14 parts) ■ Reduction in maintenance costs ■ Robustness due to anodized body rigidity ■ Stainless treatment of liquid contact parts allows compatibility with various materials *For more details, please refer to the PDF document or feel free to contact us.

• spray

Easy installation, easy operation, easy maintenance! A tank compatible with various coatings.

The "Paint Tank" is a pressure tank for air spray paint. It offers a choice of two agitator blades for various mixtures and materials. Additionally, the agitator air motor provides low-speed, high-torque performance with three radial piston technologies. We offer a range from a lightweight 2L aluminum tank to a high-production 50L stainless steel tank at 7 bar. 【Features】 ■ Sturdy design and easy cleaning ■ Paint capacities ranging from 2 liters to 50 liters ■ Compatible with various coatings ■ Easy operation ■ Agitator air motor is oil-free *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

High coating efficiency and high-quality film performance! Easy maintenance bell-type painting machine.

The "NanoBell 2" is a bell-shaped painting machine designed for robots, miniaturized and lightweight for small robots. It is easy to detach and disassemble, allowing easy access to valves and fittings for maintenance. Both hollow and solid types of robot wrists can be selected. Additionally, it can save 20-50% of paint compared to conventional products, and with Hi-TE technology, it enables more pattern painting control. 【Features】 ■ Modular design for easy maintenance ■ High-quality finishing paint ■ Achieves high coating efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• spray

Outstanding painting quality! Significantly reduces paint loss with high voltage and high current.

The "Nano Gun" is a manual electrostatic spray gun that uses both high current and high voltage. By optimizing the charge of the paint and the efficient application of paint to the target area, the coating efficiency can be improved by up to 20% compared to conventional gun designs. 【Features】 ■ Reduces operator fatigue and allows for comfortable work ■ Significantly saves on paint and air ■ Accommodates a wide range of paint discharge volumes, both large and small ■ Demonstrates excellent performance in high-productivity lines ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• spray

A variety of nozzles are available! Suitable for various powder applications. Easy maintenance.

The "Auto Mach Jet" is a painting machine designed for powder coating in general industry. It is commonly used as a fixed station within high-speed color change booths such as the PVV EasyDrive. It can also be installed in reciprocators within the PVV EasyCompact booth. 【Features】 ■ High painting quality - Easy precise setup of voltage and current - Excellent painting on complex-shaped parts ■ Easy maintenance - Simple spray gun disassembly - Profile design allows for easy cleaning with just air blowing - Nozzle has high wear resistance *For more details, please refer to the PDF materials or feel free to contact us.

• spray

Improved productivity with outstanding spray quality! Achieving stable high coating efficiency.

"Excite Light" is a manual spray gun that emphasizes lightweight, simplicity, and maneuverability. With outstanding spray quality and a high coating efficiency (up to 86%), it is suitable for spraying complex-shaped parts. To maximize performance, we offer two specifications: 60 bar and 120 bar. 【Features】 ■ 30% weight reduction without compromising the balance of the gun ■ Compact design allows easy access to recessed areas and complex-shaped parts ■ Soft trigger reduces the risk of conditions like tendonitis ■ No pattern adjustment needed *For more details, please refer to the PDF document or feel free to contact us. *Similar technologies (AA, air assist, air wrap, air airless, air coat)

• spray

We offer single-component and two-component solvent types! High-speed rotating bells compatible with various painting processes.

The product is a high-speed rotating bell of the Robotech painting machine that accommodates various products and painting processes. The "PPH 707SB" is a solvent electrostatic painting machine with internal application technology, applying the technology of high-speed rotating turbines and magnetic bell cups. The "PPH 707SB-2K" is a two-component solvent electrostatic painting machine with internal application technology, where the static mixer is positioned before the injector, contributing to the reduction of mixed paint. It also accommodates various two-component materials. 【Features of PPH 707SB】 ■ High performance ■ Flexibility ■ Easy maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine

We offer two technologies, HTI and HPA! They cater to various applications.

The "A35 HTI/HPA" is a spray technology developed by Samess Kremlin, which has achieved the best coating efficiency and film quality in the industry over many years, specifically for high-performance paint exhibitions. The ultra-low pressure "HTI" delivers optimal film quality and coating efficiency while complying with environmental protection standards. The low-pressure "HPA" can achieve film quality that has been difficult to attain until now, with powerful atomization, accommodating a variety of materials including high-viscosity substances. 【Features】 ■ High productivity: Stable and high valve opening and closing performance ■ Fully compatible with water-based paints: All stainless steel joints ■ A wide variety of nozzle options ■ Significantly reduces the speed of paint particles, improving coating efficiency ■ Reliable film quality backed by proven results in the automotive industry ■ Compatible with various painting methods, including hand guns and automated systems *For more details, please refer to the PDF document or feel free to contact us.

• spray

A high-efficiency pump that maximizes energy efficiency, suitable for 1.5L/min! Made of stainless steel and compatible with a wide range of liquids!

The "AIRLESS 40C50" is a paint pump suitable for airless applications, characterized by low air consumption and economic efficiency. It is a high-efficiency pump designed to maximize energy efficiency, suitable for 1.5L per minute. Additionally, it features a dead-zone-free structure for quick cleaning and product switching. 【Features】 ■ Thick suction and high compression ratio ■ All wetted parts are made of stainless steel ■ Simple design significantly reduces the number of components *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Easy! You can change the pressure adjustment range by changing the number of plates. Extremely high precision even at low pressure! Suitable for moisture-sensitive materials and water-based materials.

The "Leg Master" is a high-pressure regulator specially designed for high-viscosity materials, suitable for moisture-sensitive materials and water-based materials, featuring a diaphragm design. Its modular design allows for control across a wide range of pressures. Additionally, we offer heating regulators (24V or 220V), SST regulators, and special regulators for highly abrasive materials upon request. 【Features】 ■ Extremely high precision even at low pressure ■ Excellent repeatability ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Other painting machines

Adopting rotary painting technology! Wide patterns and high discharge painting are possible.

"Inovel" is an electrostatic powder bell coating machine that employs rotary painting technology. It can detect the bell speed and maintain a constant speed, allowing for stable application. Additionally, it reduces the number of joints and enables easy assembly, featuring a single block design with fewer components. It allows for painting on various types of workpieces, but it is particularly effective on flat panels. 【Features】 ■ No high-voltage cable required, integrated high-voltage unit ■ Easy-to-disassemble powder bell ■ Adjustable air shroud ■ Quickly forms the appropriate spray size ■ Excellent and consistent film formation *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Reduced material loss during flushing & quick color change! Pump suitable for AIRMIX finishing.

The "AIRMIX EOS 15-C25 & 30-C25" is an air mix paint pump characterized by extremely low pressure start-up, consistent supply, and pulsation-free operation, providing excellent finishing. The liquid section is designed to accommodate a wide range of viscous materials, reducing material loss during flushing and allowing for quick color changes. 【Features】 ■ Low air consumption ■ Sealed structure - No risk of injury - Protects lubricants from foreign matter intrusion - Easy-to-use rotary outlet fitting ■ No assembly required tie rod ■ Design eliminates dead zones *For more details, please refer to the PDF document or feel free to contact us.

• Other painting machines

Especially when high precision pressure adjustment is required! Manual pressure adjustment type.

The "Liquid Regulator for Coating" is a manual pressure regulator suitable for situations where high precision pressure control is required. It ensures stable material supply even during continuous pressure control. It is designed to accommodate materials ranging from low to medium viscosity. 【Features】 ■ High precision pressure control ■ Easy cleaning due to surface treatment of wetted parts ■ Compatible with water-based paints ■ Equipped with a pressure gauge *For more details, please refer to the PDF document or feel free to contact us.

• Pressure Control

Equipped with an external valve for easy maintenance! A pump that delivers a wide range of coating materials.

The "Flowmax 17A2・34A2" is a pump designed to transport materials that contain moisture-absorbing agents and water-based substances. Thanks to its unique design with an external valve, maintenance has become extremely easy. It does not require lubricants, has a long service life, and is highly reliable. 【Features】 ■ Extended service life ■ No lubricants required ■ High reliability ■ Easy maintenance with a design featuring an external valve *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

High coating efficiency that avoids excessive application! A lubricant spray designed for energy saving with no post-processing required.

"Shamesulbu" is a lubricant spray that can be used for machining fins, tubes, and press tools. With a design that applies electrostatic coating technology, it achieves a coating efficiency of over 98% by avoiding excessive application. Since post-treatment of the lubricant (degreasing and cleaning) is unnecessary, it saves energy. It not only reduces maintenance but also contributes to improving safety in the workplace. 【Features】 ■ High coating efficiency ■ Accurate low discharge volume control ■ Minimization of workspace ■ Easy integration into equipment ■ Modular design *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants

Improved operability through ergonomically designed features! A powder coating handgun that accommodates various applications.

The "e-Jet2" is a powder coating manual gun that creates stable patterns and has improved coating efficiency. In addition to the ergonomically designed gun, the trolley is simple, easy to use, and compact, enhancing operability. It offers a wide variety of nozzle types, making it suitable for various powder applications. 【Features】 ■ High coating efficiency ■ Stable pattern ■ Compact and user-friendly trolley ■ Easy-to-read display and controls *For more details, please refer to the PDF document or feel free to contact us.

• spray

An airless gun that demands high productivity! Improved operability with an ergonomic design.

The "SFLOW 275&450" is an airless spray gun designed for high-quality atomization and high productivity. It comes with a wide variety of flat or reversible tips to accommodate various applications. The trigger features a stable grip that reduces fatigue, allowing for a more comfortable painting experience. 【Features】 ■ 81% high transfer efficiency ■ High-quality atomization ■ Designed for high productivity ■ Suitable for various applications ■ Easy filter replacement with dedicated tools *For more details, please refer to the PDF document or feel free to contact us.

• spray

A chop-check pump capable of handling ultra-high viscosity materials active in the automotive market! Equipped with a reverse seat for extended lifespan.

The S1 is a heavy-duty, high-durability pump that uses a free-flow check plate. The reversible check plate doubles its lifespan. In addition to handling ultra-high viscosity materials up to 15,000,000 CPS, it can also withstand high temperatures of up to 200°C thanks to its special throat seal. 【Features】 ■ Uses a free-flow check plate ■ Doubles lifespan with a reversible sheet ■ Compatible with ultra-high viscosity materials ■ Can withstand high temperatures up to 200°C ■ Equipped with a special throat seal *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This is an industry-standard measuring device provided by Sames, a long-established manufacturer of powder coating equipment, for easily and stably measuring and quantifying the flowability of powders.

The "AS100" is a powder flowability measuring device designed to measure the fluidization of powder coatings, which affects the performance of powder coating. This product indicates whether the powder coating is in a suitable state for spray painting or powder transport. It is widely used in powder coating work sites, quality control at paint and material manufacturers, and facilities such as powder coating testing laboratories. 【Features】 ■ Quick and accurate measurement with quantification ■ Easy to use immediately ■ Extensive track record in powder laboratories and similar settings *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

[Speaker] Ministry of Land, Infrastructure, Transport and Tourism, Road Bureau, Planning Division, Road Economic Research Office Planning Specialist Yuki Endo [Key Lecture Content] The Ministry of Land, Infrastructure, Transport and Tourism is advancing discussions on the realization of automated logistics roads as a new form of logistics in response to recommendations from the "Interim Summary on the State of High-Standard Road Networks," addressing logistics crises and carbon neutrality. This lecture will introduce the final summary on the state of automated logistics roads published in July of the 7th year of Reiwa, as well as the demonstration experiments planned for the 7th year of Reiwa. [Lecture Items] 1. Final summary on automated logistics roads 2. Demonstration experiments for the 7th year of Reiwa 3. Q&A / Business card exchange

[Speaker] NTT Docomo Business Inc. 5G & IoT Services Department Director in charge of Global Connected Cars, Yuji Tamai [Key Lecture Content] The value of SDV lies in continuously cycling 'updates × data × cloud', and connectivity is a prerequisite for this. In this presentation, we will organize the barriers of quality, cost, and regulation faced in global expansion, and explain the design principles and operational models from roaming enhancement, eSIM/RSP (SGP.32), integrated management (CMP), NTN, to Network API. Additionally, we will delve into security aspects related to connectivity, introducing phenomena observed in actual service operations and their countermeasures, as well as exploring other operational updates (staged delivery, avoiding simultaneous activation, monitoring/observability). [Lecture Items] 1. Positioning of connectivity in SDV 2. Barriers to global connectivity 3. Designing to "strengthen" roaming 4. eSIM/RSP and SGP.32 5. Integrated connectivity management (CMP) and operations 6. Further connectivity - NTN and Network API 7. Security and update operations 8. Q&A

"Even though I'm communicating, nothing changes." "When I give a warning, the atmosphere gets worse." — Are you trying to solve these problems just by changing how you interact? What you need is not to move people, but to create a workplace that is easy to navigate. I will explain based on numerous examples of on-site improvements that I have supported. Held on May 27 (Wednesday). Please check the LP for more details. ▼ For more information and registration (free), see below.

At the Dry Fog Humidification System Free Demo Experience, you will have the opportunity to actually experience our Dry Fog, as well as our single-fluid and dual-fluid humidifiers. We will explain the differences from conventional humidifiers and the effects of implementation. In addition to introducing the latest case studies, we will also provide time for you to consult directly with our specialized staff. Please select a convenient venue and date from the application page and apply. * The "morning session" and "afternoon session" contain the same content. Please participate at a time that suits you. * This event is intended for users only. Participation from trading companies, other companies in the same industry, or for sales purposes to our company is not permitted. Venues: ■ Yamagata Venue: 3/12 (Wed) at Yamagata International Exchange Plaza 3/13 (Thu) at Sakata Chamber of Commerce and Industry ■ Sendai Venue: 3/14 (Fri) at Kiri no Ikeuchi Sendai Branch ■ Tokyo Venue & Osaka Venue: 3/18 (Tue), 3/19 (Wed), 3/21 (Fri) at Kiri no Ikeuchi Tokyo Sales Office & Kiri no Ikeuchi Osaka Headquarters ■ Nagoya Venue & Fukuoka Venue: 4/9 (Wed), 4/10 (Thu), 4/11 (Fri) at Kiri no Ikeuchi Nagoya Sales Office & Kiri no Ikeuchi Fukuoka Sales Office

In recent years, as many companies are considering modernization, exploring methods for system renewal has become an important issue. This seminar will focus on "Rewrite," one of the solutions to such challenges, and will explain questions and issues encountered during project promotion in a Q&A format. <Program> - Opening - How to advance system renewal through "Rewrite" and key points for problem-solving - Introduction of unique tools to support migration <Recommended for> - Those who are struggling with specific methods for system renewal - Those who are concerned about the continuity of maintenance for existing systems and a shortage of personnel - Companies that own IBM i (AS/400) *We may refuse applications from competing companies or those not eligible to participate.