A new catalog has been registered! Measurement equipment introduction / component analysis device.

We provide a minimum half-day estimate and use a component analysis machine to verify and guarantee the steel materials.

〈Equipment Details〉 Equipment Name: Emission Spectroscopy Analyzer (Component Analyzer) Model: SPECTROTEST Manufacturer: AMETEK Year of Introduction: 2019 This measuring instrument performs quantitative analysis of elements contained in steel materials, enabling material identification, among other functions. *Basically, component analysis is conducted under the "Measurement Services." - Confirm that there is no contamination with foreign materials in the production site - Verify and guarantee that materials meet specifications before product shipment or upon material receipt - Check the welding parts (confirm that the materials used in the welding material are correct) etc... Measurable Elements: Carbon (C), Nitrogen (N), Titanium (Ti), Phosphorus (P), Nickel (Ni), Sulfur (S), Boron (B), Copper (Cu), Cobalt (Co), Aluminum (Al), Magnesium (Mg), Tin (Sn), Zinc (Zn), Lead (Pb), Iron (Fe) A wide variety of elements can be measured. Please feel free to consult us about any concerns regarding inspections. Free estimates available! From metals to resins, we can handle cutting processing for prototype and development parts!

• Contract measurement

Shortest half-day estimate / Manufacturing of parts without drawings (reverse engineering) / We handle everything from scanning the actual item to processing based on drawings.

Do you have any of the following concerns regarding parts procurement? 1. The parts have been discontinued, and there are no suppliers available. 2. I can no longer rely on the manufacturing company I had requested. 3. The parts are damaged or worn and need replacement, but they are old parts and there are no drawings available. 4. There are no drawings, and I want to create the same item from the actual part. → Our company, which has three quality control centers in Japan, can take your actual part and handle everything from drawing creation to processing and inspection in one go. We perform scan modeling using non-contact 3D scanner-type three-dimensional measuring machines and image dimension measuring devices to reproduce the drawings. Additionally, we can handle quantities starting from single-item processing! We streamline your procurement process with a single point of contact for surface treatment, hardening, polishing, and more. Furthermore, our company also accepts measurements and evaluations of dimensions, geometric tolerances, three-dimensional measurements, curved surfaces, roundness, surface roughness, etc. We can handle everything from metals to plastics! Trust us with the cutting processing of prototype and development parts. For more details, please contact us or download our catalog.

• Contract measurement

Shortest half-day estimate / Non-contact measurement devices can measure soft products such as plastics and rubber without deformation.

Soft products such as resin, plastic, and rubber are "difficult to measure" because they can deform when trying to measure them with tools like calipers. Measurement errors can also occur depending on the measurer. Rubber O-rings are a prime example of this. In such cases, our company uses non-contact measuring instruments. The image dimension measuring device (Keyence) / IM-8000 is a non-contact measuring machine that uses images for measurement, allowing for precise measurement of soft processed parts like rubber without deforming the object. If you are struggling with dimension measurement of products that stretch, shrink, or easily deform, please take advantage of our "measurement service." Additionally, we specialize in measuring mold parts and resin molded products, and we offer not only geometric tolerance measurement and evaluation using digital devices but also measurements of curved surfaces, surface roughness, and roundness. For over 30 years, we have provided processed parts to various client companies. Based on the inspection techniques we have acquired, we conduct measurement services. We have a proven track record with a wide range of industries, including semiconductors, automotive, electronics, medical, and food. For more details, please contact us or visit our website.

• Contract measurement

Shortest half-day estimate / One of the largest in Kyoto Prefecture! We conduct inspections and precise dimensional measurements in our own quality control space.

Recently, the demand for product quality has been increasing across all industries. In particular, precision components for testing and inspection equipment, electronic devices, and semiconductor equipment require extremely high dimensional measurement accuracy. Our company, which has the systems and inspection equipment to inspect such ultra-high precision parts, has supported manufacturing companies in terms of "dimensional measurement and evaluation" as an external measurement company. ◎ Example of equipment owned ◎ - CNC Coordinate Measuring Machine (Crysta-Apex S7106) Capable of measuring up to x700 y1000 z600 mm. E0, MPE=1.9+3L/1000 - 3D Scanner Type Coordinate Measuring Machine (VL-350) Capable of 360° omnidirectional 3D measurement with an accuracy of ±10μm. It can measure geometric tolerances, curved surfaces, virtual lines, irregular shapes, and dimensions in areas where probes cannot be applied. Please feel free to contact us for reducing the burden of incoming and outgoing inspections, reverse engineering, or consulting on difficult measurement cases. We can handle everything from metals to plastics! Leave the cutting and processing of prototype and development parts to us.

• Contract measurement

Shortest half-day estimate / A core company that creates high added value and leads the regional economy!!

Our company has been selected as a "Regional Future Leading Company"! On March 16, at the Regional Future Leading Company Summit in Niigata, we took the stage as a representative company from Kyoto Prefecture and received the certification directly from Minister of Economy, Trade and Industry, Seiko Noda. ◎ What is a Regional Future Leading Company? It is a core company that creates high added value by leveraging the strengths and characteristics of the region and leads the regional economy. We were recognized and evaluated for our "unique business model" and selected from among many manufacturing companies. We will continue to grow into a company that can contribute even more to our customers. Details about "our unique business model" are included in our company brochure. From metals to plastics, we can handle it all! Please leave your prototype and development parts machining to us.

• joint

Half-day estimate at the shortest / A must-see for those who are thinking, 'I want to ask...'

Q1. Where is the factory located? A1. We do not have our own production facilities. We partner with over 1,110 cooperating companies both domestically and internationally. Q2. What types of processing can be done? A2. MC cutting, complex lathing, sheet metal processing, resin cutting, can manufacturing, discharge machining, wire cutting, gear processing, hardening, polishing, various surface treatments, etc. We can accommodate a wide range of requests, including prototypes and research and development projects. Q3. What materials can you handle? A3. Since it covers a wide variety, please refer to the "Basic Information" section below. Q4. What is the minimum lot size you can handle? A4. We can handle a minimum of 1 piece and can also accommodate over 1,000 pieces. It may vary depending on size and conditions, so please feel free to contact us. = [Catalog] Q&A Frequently Asked Questions continue here! = Please download from below. Q. What is the price for a single part? Q. Regarding delivery times Q. What are the guaranteed values for dimensional accuracy? Q. What are the sizes you can process? Q. Regarding assembly Q. What is the accuracy of precision dimension measurement? etc. From metals to resins, we are your go-to for cutting processing of prototype and development parts.

• Semiconductor inspection/test equipment

Shortest half-day estimate / Roundness and cylindrical shape measuring instrument / Mitutoyo / RA-2200AS

"Features" Measurements can be taken even for objects with protrusions or where the circumference of the circle is not fully established. Not only roundness and circularity, but also flatness and other parameters can be measured with high precision. - Maximum measurement diameter: φ300mm - Maximum load capacity: 30kg - Equipped with automatic centering adjustment function In our measurement service business, we take custody of your inspection items and conduct a thorough inspection with the latest inspection equipment and a team of 10 inspection technicians in our precision inspection room. Do you have production equipment but cannot perform pre-shipment inspections? Are you facing issues with the time it takes for inspections? Our company has one of the largest inspection rooms in Kyoto Prefecture and numerous digital measuring instruments, allowing us to understand and solve the problems you face in measurement and evaluation. For more details about our measurement service business and company information, please refer to the catalog available for download at the bottom under "PDF Download." Additionally, our official website contains even more detailed information. From metals to plastics, you can trust us with the machining of prototype and development parts.

• Vacuum Packaging Machine

Shortest half-day estimate / Evaluation type surface roughness measuring instrument / Mitutoyo / SV-3200S4

As the demands for the precision of mechanical parts and surface treatment increase, surface roughness measurement is important for managing the finished state and mechanical properties. "Touch Probe Surface Roughness Measuring Instrument Features" - Capable of measuring long distances - Clear shape waveforms can be obtained "Measurement Range" - X-axis (horizontal direction) 100mm - Z1-axis (detection part) 8μm, 80μm We provide actual measurements of geometric tolerances in the inspection report. Additionally, we can attach calibration certificates for the equipment used in the inspection upon request. Our company actively introduces various digital measuring instruments, including the evaluation-type surface roughness measuring instrument (Mitutoyo) SV-3200S4. Please trust us with the inspection of development products and processed parts. For details on our measurement services and company information, please refer to the catalog available for download at the bottom under "PDF Download." Furthermore, our official website contains more detailed information. From metals to plastics, please leave the cutting processing of prototype and development parts to us.

• Vacuum Equipment

Shortest half-day estimate / Rockwell hardness testing machine (hardness tester) / Mitutoyo / HR-110MR

In quality management engineering, hardness testing plays an important role. Rockwell hardness (HRC) - It is the most common evaluation method. - It is suitable for most metals. - It can measure samples with a maximum size of height 180mm and depth 165mm. - Due to the relatively high measurement pressure, it is not suitable for thin materials. - The evaluation is based on the depth of indentation after a single push, which reduces the effect of surface hardening. Are you struggling with inspection issues, such as being unable to issue inspection certificates? Our company actively expands inspection facilities and environments, including the Rockwell hardness testing machine (hardness tester) Mitutoyo HR-110MR and the latest digital measuring equipment, allowing us to understand and solve the problems you face in measurement and evaluation. For details on our company and measurement services, please refer to the catalog available for download at the bottom under "PDF Download." Additionally, our official website contains more detailed information. From metals to plastics, you can rely on us for cutting processing of prototype and development parts.

• Contract Inspection

Shortest half-day estimate / Eccentricity measurement gauge / Universal Punch Company

"Features" This measuring instrument is designed and manufactured to sandwich the reference surface of the workpiece being measured with a three-point support roller, allowing for rapid and high-precision measurement of runout, concentricity, perpendicularity, cylindricity, etc. against the reference surface. The measurement accuracy is 2.5 to 4 microns. "Model Number": A-10/110-10FP Workpiece Diameter: 3.1 to 25mm, Workpiece Length: 76mm, Gauge Width: 114mm, Gauge Length: 216mm, Gauge Height: 73mm, Gauge Weight: 3.0kg "Model Number": B-40/140-40FP Workpiece Diameter: 20 to 102mm, Workpiece Length: 6.3 to 203mm, Gauge Width: 152mm, Gauge Length: 368mm, Gauge Height: 76mm, Gauge Weight: 7kg Our company possesses a wide range of measuring instruments. Additionally, we have a team of 10 inspection technicians dedicated to accommodating various measurements. For more information about our company and measurement services, please refer to the catalog available for download at the bottom under "PDF Download." Furthermore, our official website contains even more detailed information. From metals to plastics, you can rely on us for cutting processing of prototype and development parts.

• shaft

Shortest half-day estimate / Introduction of state-of-the-art measuring equipment! We are actively expanding our inspection facilities.

"In August 2018, we upgraded our image dimension measuring device to the latest version." ◎IM-7030 [Image Measurement] Field of View: Wide Field Measurement Mode: 300 x 200 mm (Corner R50) High Precision Measurement Mode: 225 x 125 mm Minimum Display Unit: 0.0001mm (0.1μm) XYZ Stage: 200 x 100 mm x 75 mm (Electric) Load Capacity: 7.5kg [Light Probe Measurement] Measurable Area (XY): 190 x 90 mm Maximum Measurement Depth: 30 mm *We also have another model of the image dimension measuring device, "IM-8000." "Features" Measures 100 workpieces at up to 99 locations in just a few seconds. Height and depth can be measured simultaneously. Automatically reproduces the lighting conditions set once, and automatically recognizes edge areas, eliminating human error. For details on our measurement service business and company information, please download the PDF from the link below. From metal to resin, we handle cutting processing for prototype and development parts with confidence.

• Sorting machine

By consolidating the procurement contact for processed parts, the productivity of parts ordering can be improved with a minimum half-day estimate!

"How do you procure processed parts?" We will take care of all arrangements related to parts procurement, from selecting processing vendors, obtaining quotes, arranging materials and processing, surface treatment, to inspection! → We will handle all the "difficult communications" that you used to have with multiple companies during parts procurement. We offer precision machining (machining, milling, turning, precision sheet metal processing, etc.) for all sizes, from small to large, including heat treatment and surface processing. You can request processing for a single part, so please feel free to consult with us. Would you like to change your procurement system and increase productivity? Please give us a try. Details are thoroughly documented in the catalog [Processed Parts Procurement Improvement Proposal BOOK]! We can handle everything from metal to resin! Leave the cutting processing of prototype and development parts to us.

• Other machine elements

The shortest half-day estimate/contract measurement is your company's ally in "quality assurance for precision machined parts"!

We will take care of your product and our inspection professionals will perform precise dimensional measurements and evaluations on your behalf. We can issue inspection certificates and provide measurement data, of course, and we can also propose ways to shorten inspection time and improve operational efficiency! Our website contains detailed information about our achievements. If you have any questions or concerns, please feel free to contact us. We can handle everything from metal to resin! Leave the machining of prototype and development parts to us.

• Contract measurement

Shortest half-day estimate / High-quality products delivered to you through advanced quality control systems and careful, reliable inspections. We are committed to sustainable environmental conservation activities.

At Agency Assist, we implement a consistent quality management system from arrival to inspection and shipping at our "Quality Control Center" to deliver all products with assured quality. Our skilled technicians work together to conduct inspections. Regarding our commitment to the environment, we obtained ISO 14001 certification in 2009 and actively promote sustainable environmental conservation activities to support stable supply for our customers. "Quality Basic Policy" ◎ Develop business activities with "improving customer satisfaction" as the top priority. ◎ Aim to establish a quality management system and promote environmental maintenance. ◎ Develop activities where "quality is built into the process" through strong collaboration with partner companies. ◎ Establish a quality assurance system with the eternal goal of becoming a company with "zero" quality defects. From metals to resins, we are your go-to for cutting processing of prototype and development parts. Our official website contains more detailed information. Please take a look. (Link below)

• Other machine elements

Shortest half-day estimate / We have newly introduced the image dimension measuring device IM-8000 (Keyence) at the Quality Control Center! We will achieve high-precision measurements.

Name: KEYENCE (Keyence Corporation) Image Dimension Measuring Instrument / IM-8000 The detection performance has tripled compared to conventional models, allowing for easy measurement of objects simply by placing them on the stage. Images are instantly projected in one go, enabling automatic precision measurement! "Overwhelming Reduction in Workload" By automatically measuring up to 300 points in 3 seconds, we provide rapid inspection responses. Equipped with a 20-megapixel CMOS sensor, even fine edges and complex measurement items that were previously difficult to capture can be easily cleared! Additionally, with the 360° rotation unit that automatically rotates the object, measurements on multiple surfaces can be performed quickly and with high precision. "Improvement in Quality Assurance System" The combination of advanced "high-speed image processing technology" and "optical design technology" ensures that measurement results, which can vary depending on the skill of the measurer and the temperature of the environment, remain consistent, allowing for stable precision measurements. By outsourcing inspections, we can reduce the burden of in-house inspections and provide fair evaluations as a third-party organization, addressing various measurement needs. Suitable for materials ranging from metals to plastics! Leave the machining of prototype and development parts to us.

• Other machine elements

Shortest half-day estimate / Introduction of new inspection equipment! VL500 / Keyence supports high-precision measurements with 360-degree all-around scanning.

Are you having trouble measuring geometric tolerances, curved surfaces, and complex shapes that are difficult with calipers and three-dimensional measuring machines? Our company offers measurement services for areas where calipers and three-dimensional measuring machines struggle, tailored to various measurement needs, including geometric tolerances, virtual lines, and curved surfaces. We would like to introduce the 3D scanner-type three-dimensional measuring machine we use for this purpose. ◎ VL-500 / Keyence "Features" - Measures large objects as connected data without the need for markers. - Acquires 3D data with 360-degree scanning, leaving no blind spots. - Capable of measuring shapes that could not be captured with a measurement resolution of 16 million points. - Compares good and defective products to measure and visualize shape differences. - Outputs measurement result data by comparing point cloud, mesh data, and CAD. - Reverse engineering (creating drawings of parts). In our measurement service business, we take custody of inspection items, and our inspection technicians conduct thorough inspections of all areas. We possess a wide range of the latest digital measuring equipment, including CNC three-dimensional measuring machines and image dimension measuring devices. We can handle everything from metal to resin! Leave the machining of prototype and development parts to us.

• 3D measuring device

Shortest half-day estimate / We will solve your concerns such as "difficult to measure, unable to allocate man-hours," "no inspection equipment for parts," and "manufacturing parts without drawings"!

Our company utilizes the latest digital inspection equipment to conduct over 60,000 inspections monthly, and we would like to introduce the flow of our measurement services. 1. Consultation on inspection items 2. Meeting: We will understand the inspection issues you are facing and provide proposals for solutions. 3. Quotation 4. Order and receipt of inspection items → We will also fully comply with confidentiality agreements. 5. Inspection: Our inspection technicians will conduct inspections at one of the largest precision inspection rooms in Kyoto Prefecture. 6. Return of inspection report and inspection items → Upon request, we can also attach calibration certificates for the equipment used in the inspection. 7. Delivery Using image dimension measuring instruments and CNC three-dimensional measuring machines, we can perform high-precision dimensional measurements that cannot be measured with calipers, such as geometric tolerance measurements. For measuring curved surfaces and virtual lines, we use a non-contact 3D scanner-type three-dimensional measuring machine to scan the actual item and handle everything from drafting to production in one go. We also possess numerous evaluation equipment, including component analyzers, surface roughness measuring instruments, Rockwell hardness testers, and roundness and cylindrical shape measuring instruments. From metals to plastics, you can trust us with the machining of prototype and development parts.

• Contract measurement

Half-day estimate at the shortest / With high-precision inspection technology and one of the largest inspection facilities in Kyoto Prefecture, you can trust us with the inspection of processed parts and developed products!!

We often hear concerns about not having enough time for incoming inspections of machined products or pre-shipment inspections! As the required precision for quality increases, the burden of inspection tasks grows, leading to issues such as difficulty in measurement and insufficient man-hours. Our measurement services aim to clarify the problems related to "measurement and evaluation," thereby reducing the burden of inspection tasks. ┗ It is also possible to attach a "calibration certificate" for the equipment used in the inspection. ┗ We will provide the actual measured values of precise dimensional measurements and geometric tolerances in the "inspection report." Using the latest measuring equipment, such as CNC three-dimensional measuring machines, we inspect 60,000 parts monthly at our own inspection facilities. * For more information on our available equipment, please download the catalog for "Measurement Services (Precision Inspection)." We can accommodate various cases, including spot usage only when needed. We handle everything from metals to plastics! Leave the cutting and processing of prototype and development parts to us. For more details about our measurement services, please refer to our company brochure.

• Contract measurement

Shortest half-day estimate / We have a large number of digital measuring instruments and specialize in measurement inspections! Spot usage for only the necessary amount is also possible during times of excessive orders.

We will take custody of your products and our inspection technicians will perform precise dimensional measurements. This is a measurement service that we can offer because our company has pursued and achieved high-quality management through the procurement of processed parts. ◎ Features 1: Inspection of 60,000 processed parts per month We possess one of the largest "precision inspection rooms" in Kyoto Prefecture, along with numerous digital measuring instruments such as "image dimension measuring devices" and "CNC three-dimensional measuring machines," allowing us to conduct inspections of 60,000 items monthly. 2: Creation of inspection reports We will provide the actual measured values of precise dimensional measurements and geometric tolerances in an "inspection report." It is also possible to attach the "calibration certificate" of the equipment used for the inspection. 3: Abundant inspection equipment - Image dimension measuring device (Keyence) - CNC three-dimensional measuring machine (Mitutoyo) - Roundness and cylindrical shape measuring machine (Mitutoyo) - Eccentricity measuring gauge (Universal Punch Co.) - Rockwell hardness tester (Mitutoyo) - Surface roughness measuring instrument (Mitutoyo) - Digital height gauge 700 (TESA) and many others From metals to plastics, we are ready to handle the cutting and processing of prototype and development parts.

• Leak Testing Equipment

Shortest half-day estimate / [Leave the measurements to us] CNC three-dimensional measuring machine / Mitutoyo / S7106

The Crysta-Apex S7106 is equipped with a standard temperature compensation system that ensures the accuracy of the measuring instrument within an environment of 16°C to 26°C. It monitors temperature using temperature sensors for the measured object and sensors mounted on each axis scale, making it unaffected by temperature conditions. It allows for accurate and rapid measurements while guaranteeing the inherent precision of the measuring instrument, accommodating various shapes of workpieces. In our measurement service business, we take custody of inspection items, and specialized inspection technicians conduct inspections using the latest inspection equipment in a precision inspection room, tailored to customer requests. Please leave the creation of inspection reports and the inspection of processed parts and development items to us. Additionally, we can handle everything from metal to resin! Please trust us with the cutting processing of prototype and development parts.

• 3D measuring device

Shortest half-day estimate / We have four quality control centers equipped with a wide range of high-performance digital measuring instruments. We solve various inspection needs and quality challenges.

We will take custody of the product, and our inspection technician will perform precise dimensional measurements. As a reliable pinch hitter during times of excessive orders, and as an external measurement company that creates inspection reports, we provide high-precision measurement services. This is a service we can offer because our company has pursued high-quality management through the procurement of processed parts. We will, of course, propose "the creation of inspection reports" and "the provision of measurement data," as well as "reducing inspection time and improving operational efficiency." ◎ Features 1: Inspection of 60,000 processed parts per month We possess a large number of high-function digital measuring instruments, such as the largest "precision inspection room" in Kyoto Prefecture, "three-dimensional measuring machines," and "image dimension measuring devices," conducting inspections of 60,000 parts monthly. 2: Issuance of inspection reports We submit the actual measured values of precise dimensional measurements and geometric tolerances in the "inspection report." It is also possible to attach the "calibration certificate" of the equipment used for inspection. 3: A flexible inspection system that can respond quickly to short delivery times. We can accommodate various cases, such as excessive orders, short delivery specifications, and spot usage for only the necessary quantities. From metals to plastics, you can trust us with the cutting and processing of prototype and development parts.

• Contract measurement

We offer the shortest half-day estimates for precision parts dimension measurement and geometric tolerance measurement.

We have a state-of-the-art precision inspection room equipped with a variety of the latest digital measuring devices to perform dimensional measurements and geometric tolerance measurements of precision parts. When measuring the roundness of cylindrical shapes, we use the Mitutoyo Roundness and Cylindrical Shape Measuring Machine (RA-2200AS). It can measure up to a maximum diameter of Φ300 mm. It features a high-precision rotating table that allows for accurate centering and leveling of the measurement object, with an axial rotation accuracy of (0.023.5X/10000) μm and a radial rotation accuracy of (0.02+3.5H/10000) μm. - Roundness, cylindricality, and flatness can also be measured. - It can accommodate medium-sized parts up to Φ300 mm. - Inspection certificates can also be provided. In addition to cylindrical shapes, we can measure three-dimensional, flat, and curved surfaces. For more information on other measuring devices, please refer to our "Company Profile." From metals to plastics, we can handle cutting and processing of prototype and development parts.

• Contract measurement

We offer a minimum half-day estimate and propose to reduce the burden of inspections by utilizing us as an external measurement company.

In the field of microfabrication, it is difficult to apply contact measurement instruments (calipers, micrometers, three-dimensional measuring machines) to the target objects. Therefore, our company uses non-contact image dimension measuring instruments. We have two models of "Keyence Image Dimension Measuring Instruments": IM-8000 and IM-7030. By illuminating the object and measuring its shadow, we can achieve high-precision measurements even for small parts and fine processing areas. We can simultaneously measure the height and depth of the target object. Additionally, we can measure up to 99 locations at once, allowing us to measure pitch and depth even for finely slotted items like heat sinks. For the measurement and evaluation of microfabricated products, please leave it to Agency Assist. We also accept measurements and evaluations of dimensions and geometric tolerances, including three-dimensional measurements, roundness, and surface roughness. For details on our equipment lineup and services, please refer to the "Company Profile." From metals to plastics, we are ready to handle cutting and processing of prototype and development parts.

• Contract measurement

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!