LoRa electric field strength measurement that can be done by one person, dedicated measuring device now available! ISAI has launched the LoRa communication electric field strength meter WD100-RXT!

A dedicated measuring device that can be used by one person! The dedicated measuring device for LoRa signal strength measurement has arrived!

The LoRa communication electric field strength meter 'WD100-RXT' traditionally required the temporary installation of an actual device to check electric field strength, with measurement data obtained through a PC connected to the receiving side, which was time-consuming and required specialized knowledge. This product solves these issues, allowing anyone to easily measure the strength of LoRa radio waves, thereby facilitating subsequent installation work. <Product Features> - Battery-operated subunit allows for optimal installation location determination by a single person - Extremely easy to confirm optimal locations - Contributes to preliminary surveys before the introduction of other companies' LoRa systems, etc. *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.

Features: ● Equipped with Intel Processor N150 / Intel Core 3 Processor N355 ● DDR5 4800MHz SODIMM ×1 (supports up to 16GB) (sold separately) ● HDMI 1.4 ×1, eDP 1.4b / LVDS ×1 ● Intel Ethernet Controller I226 (2.5GbE RJ-45 ×1), Realtek RTL8111H (1GbE RJ-45 ×1) ● Full-size mSATA / mPCIe ×1, M.2 2230 E-Key ×1 ● USB 3.2 Gen2[x1] ×2, USB 2.0 ×4 ● RS-232/422/485 ×2, RS-232 ×2 ● TPM 2.0, SATA 6Gb/s ×1, 4-bit GPIO, SMBus / I2C ×1 ● Fan-equipped heat sink available separately PICO-ASL4-FAN01: Heat sink with fan PICO-ASL4-HSK01: Heat sink PICO-ASL4-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure) * This is a model without an operating system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.