Registered with NETIS! Wireless concrete temperature & humidity sensors SmartRock and BlueRock [Commemorative campaign ongoing]

It is a fully embedded type that measures the internal temperature of concrete. A method is adopted to calculate compressive strength from the accumulated temperature on site! [NETIS registered product]

SmartRock2 does not require the cumbersome wiring and end processing that traditional wired types do! Since it is completely embedded within the concrete, it does not affect the surface finish of concrete structures. There is no need to search for sensors under covers or check electrical connections as before! Additionally, SmartRock2 adopts a method (maturity method) to calculate compressive strength from the site's accumulated temperature, accurately estimating concrete strength based on specific temperature, time, and compressive strength according to the ASTM C1074 standard calculation formula. ★Contact Information KEYTEC Corporation Tokyo Office 03-5534-8881 (Contact: Mikami, Assistant: Iikuni) Kansai Office 078-200-5217 (Contact: Kabumoto, Assistant: Izawa) ★Registered with NETIS on May 28, 2020!

• Temperature and humidity measuring instruments
• Thermometer
• Other inspection equipment and devices

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.