Announcement of the development of the "DT Series" stack height 30mm type with a floating amount of ±1.0mm, which is twice that of conventional models!

Not only can it absorb positional misalignment during fitting, but it can also accommodate positional misalignment after fitting due to rotation from tightening screws!

A "floating connector" is a connector equipped with a floating mechanism that absorbs vertical and horizontal errors that occur when mounting the connector onto a circuit board. By allowing the connector to move, it can absorb errors and misalignments during mating, preventing issues such as cracks in the circuit board. It is widely used in devices where circuit boards are densely packed, such as car navigation systems, digital cameras, and semiconductor control devices. 【Features】 ■ Equipped with a floating mechanism ■ Absorbs errors and misalignments during mating by allowing the connector to move ■ Prevents issues such as cracks in the circuit board *For more details, please refer to the PDF document or feel free to contact us.

• Board to Cable Connector

The connector's connection part is movable to absorb stress! It is widely used in both industrial and consumer equipment.

At KERU Corporation, we handle compact and high-performance "Floating Connector" products. Under the general term "D-Sign Floating," we have developed a series of new products, starting with the 0.5mm pitch connector "DY series," followed by the 0.635mm pitch connector "DW series," the 0.4mm pitch connector "DU series," and evolving into the next-generation 0.5mm pitch floating connector "DT series," which supports three-dimensional, multi-pole, and high-speed transmission. These connectors are characterized by their compact size, multi-pole capability, and high-speed transmission. 【Features】 ■ Produced in a clean area ■ Multiple connectors can be used together ■ Expanded design possibilities, enabling unprecedented designs ■ Single-point contact on the roll surface ■ Ensures a pathway for foreign objects during wiping, preventing foreign object entrapment *For more details, please refer to the PDF materials or feel free to contact us.

• Board to Cable Connector

Stack height 25mm! We have developed additional variations of the high stack type.

We have developed the 'DT Series' floating connector with a 0.5mm pitch that supports high-speed transmission, featuring a stack height of 25mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the existing receptacle side of this series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - High floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Compatible with a stack height of 25mm - Seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Achieving improved workability! The true strike zone created by gender-neutral terminals that are compact and waterproof.

The "FW Series" is a waterproof connector with a 5.0mm pitch developed by KEL with a new concept. It meets IP67 standards and achieves one of the smallest heights and sizes in the industry. By using KEL's unique male and female identical terminals with three-point contact, it enables high reliability and stable contact. Additionally, we have newly added branching and relay types to the lineup, allowing for internal wiring reduction by relaying and branching the cables. It can be passed through ducts with a minimum diameter of φ32.6mm (for 4 poles), making it easy to check corridor systems in narrow spaces. 【Features】 ■ Achieves one of the smallest classes in the industry with a 5.0mm pitch waterproof connector ■ Can be fixed in various locations using cable ties ■ High-reliability design with three-point contact and KEL's unique male and female identical terminals ■ Connector structure that improves workability during assembly ■ Robust locking structure with an excellent click feel *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

A single harness can achieve a transmission speed of 320 Gbps! Noise reduction is enhanced with a multi-point ground mechanism and a metal shell cover.

The "TSL Series" is a next-generation harness that enables 32Gbps differential high-speed transmission with a harness length of 1000mm. With a 0.55mm pitch and 31 pins, it allows for 320Gbps transmission through 10 pairs of differential connections (AWG#32 coaxial with 20 wires connected) in a single harness. To achieve high-speed transmission, resonance countermeasures are implemented by controlling impedance through adjustments in the materials, shape, and dimensions of the connectors, as well as by smoothing the grounding and transmission paths. 【Features】 ■ Supports high-speed differential transmission at 32Gbps ■ In addition to impedance control through adjustments in the materials, shape, and dimensions of the connectors, resonance countermeasures are taken by smoothing the grounding and transmission paths, improving attenuation ■ The effective mating length related to contact reliability is set at 0.5mm, optimizing the amount of insert penetration and the design of stub lengths related to transmission characteristics, thereby improving attenuation *For more details, please refer to the external link page or feel free to contact us.

• Coaxial Connectors

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Introduction of "Piab Original Hand" At Piab, we have successfully achieved suction transport of "white tray wrap packaging," which has received many requests from the food industry, without leaving any suction marks. We will propose specifications that best meet your needs, including custom sizes. Please contact us first! (Piab Japan Co., Ltd.) Here is the video (YouTube) https://youtu.be/YIsCkhF3GhQ