Announcement of the new release of the "TSL Series" connector for 0.55mm pitch high-performance coaxial cables supporting 32Gbps high-speed transmission.

Many adoptions for devices with high-speed signal transmission areas inside compact equipment!

"Ultra-thin coaxial cable connectors" are widely used in small devices and in areas where high-speed signals are transmitted. "Ultra-thin coaxial cables" are extremely thin cables, comparable to a hair, yet each one has a coaxial structure. Due to their coaxial structure, they excel in transmission characteristics, flexibility, and torsional resistance. For example, they are mostly used for connections in critical parts of devices, such as the image sensor of a camera. They are effective when wiring in tight spaces or in areas that require repeated twisting. *For more details, please refer to the PDF document or feel free to contact us.*

• Board to Cable Connector

Proven trust backed by numerous achievements! Connectors for ultra-thin coaxial cables active in a wide range of fields.

At Kelu Corporation, we handle "ultra-fine coaxial cable connectors" that possess strong characteristics against repeated bending and twisting. Despite being extremely thin, each cable has a coaxial structure, which provides excellent transmission characteristics. These connectors are used in devices that require compact housings and high-speed transmission, primarily in imaging equipment such as security cameras and projectors. 【Features】 ■ Unrelenting commitment to high-speed transmission support - We have our own equipment to measure transmission characteristic data - We can provide simulation data and compile reports on the results ■ Noise countermeasures to achieve pure signal transmission - A metal shell cover is arranged to enclose the entire connector - Ground reinforcement is achieved by dropping the ground terminal at multiple points ■ Providing stable connection quality through crimping method - The connection between the connector and cable adopts a crimping method - By using the crimping method, it allows for uniform conditions for the bulk connection of cables and connectors, ensuring stable connection quality *For more details, please refer to the PDF document or feel free to contact us.

• Board to Cable Connector

The connector's connection part is movable to absorb stress! It is widely used in both industrial and consumer equipment.

At KERU Corporation, we handle compact and high-performance "Floating Connector" products. Under the general term "D-Sign Floating," we have developed a series of new products, starting with the 0.5mm pitch connector "DY series," followed by the 0.635mm pitch connector "DW series," the 0.4mm pitch connector "DU series," and evolving into the next-generation 0.5mm pitch floating connector "DT series," which supports three-dimensional, multi-pole, and high-speed transmission. These connectors are characterized by their compact size, multi-pole capability, and high-speed transmission. 【Features】 ■ Produced in a clean area ■ Multiple connectors can be used together ■ Expanded design possibilities, enabling unprecedented designs ■ Single-point contact on the roll surface ■ Ensures a pathway for foreign objects during wiping, preventing foreign object entrapment *For more details, please refer to the PDF materials or feel free to contact us.

• Board to Cable Connector

Stack height 25mm! We have developed additional variations of the high stack type.

We have developed the 'DT Series' floating connector with a 0.5mm pitch that supports high-speed transmission, featuring a stack height of 25mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the existing receptacle side of this series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - High floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Compatible with a stack height of 25mm - Seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Achieving improved workability! The true strike zone created by gender-neutral terminals that are compact and waterproof.

The "FW Series" is a waterproof connector with a 5.0mm pitch developed by KEL with a new concept. It meets IP67 standards and achieves one of the smallest heights and sizes in the industry. By using KEL's unique male and female identical terminals with three-point contact, it enables high reliability and stable contact. Additionally, we have newly added branching and relay types to the lineup, allowing for internal wiring reduction by relaying and branching the cables. It can be passed through ducts with a minimum diameter of φ32.6mm (for 4 poles), making it easy to check corridor systems in narrow spaces. 【Features】 ■ Achieves one of the smallest classes in the industry with a 5.0mm pitch waterproof connector ■ Can be fixed in various locations using cable ties ■ High-reliability design with three-point contact and KEL's unique male and female identical terminals ■ Connector structure that improves workability during assembly ■ Robust locking structure with an excellent click feel *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

A single harness can achieve a transmission speed of 320 Gbps! Noise reduction is enhanced with a multi-point ground mechanism and a metal shell cover.

The "TSL Series" is a next-generation harness that enables 32Gbps differential high-speed transmission with a harness length of 1000mm. With a 0.55mm pitch and 31 pins, it allows for 320Gbps transmission through 10 pairs of differential connections (AWG#32 coaxial with 20 wires connected) in a single harness. To achieve high-speed transmission, resonance countermeasures are implemented by controlling impedance through adjustments in the materials, shape, and dimensions of the connectors, as well as by smoothing the grounding and transmission paths. 【Features】 ■ Supports high-speed differential transmission at 32Gbps ■ In addition to impedance control through adjustments in the materials, shape, and dimensions of the connectors, resonance countermeasures are taken by smoothing the grounding and transmission paths, improving attenuation ■ The effective mating length related to contact reliability is set at 0.5mm, optimizing the amount of insert penetration and the design of stub lengths related to transmission characteristics, thereby improving attenuation *For more details, please refer to the external link page or feel free to contact us.

• Coaxial Connectors

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.