HOLT Corporation 1553 Protocol IC HI-2130

The world's smallest MIL-STD-1553 terminal IC with a transformer integrated into a thin 15×15×4.4mm package.

The HI-2130 is a product that combines the functionality of Holt's HI-6130 16-bit parallel bus interface and HI-6131 SPI device, integrating MIL-STD-1553 protocol logic, dual transceivers, and dual transformers into a single compact package. The slim 15×15×4.4mm HI-2130LBxx is one of the world's smallest single-package 1553 terminals with integrated transformers, making it ideal for use in applications such as switched mezzanine cards (XMC) or PCI mezzanine card (PMC) assemblies. The BGA package is available in both RoHS compliant and Sn/Pb options, providing customers with a solution for Sn/Pb assemblies without the need for expensive re-balling.

• Other electronic parts

BC, 2×RT, MT simultaneous operation possible MIL-STD-1553 terminal (parallel interface, SPI interface)

The 3.3V CMOS HI-613x devices provide a complete single or multifunction interface between the host processor and the MIL-STD-1553B bus. It includes BC, MT, and 2×RT, which can be enabled to operate simultaneously in any combination. Users can allocate 64KByte of on-chip SRAM to the device according to application requirements. ■ Host Interface - HI-6130: 16-Bit Parallel Bus - HI-6131: 4-Wire Serial Peripheral Interface (SPI) ■ Japanese technical documentation on the MIL-STD-1553 communication standard is available. If you would like to see it, please contact sales@nacelle.co.jp.

• Other semiconductors

DDC's MIL-STD-1553 terminal IC and pin, as well as software drop-in compatible IC.

Holt has announced a MIL-STD-1553 terminal that is compatible with many DDC MIL-STD-1553 terminals in both pin configuration and software register levels. All families provide a complete shape, fit, and functional alternative that allows users to drop in to existing 1553 designs without changing existing board layouts or software.

• Other semiconductors

The MAMBA series features a 6mm x 6mm MIL-STD-1553 terminal (SPI interface).

The MAMBA series consists of 3.3V CMOS devices that provide a host processor and MIL-STD-1553B bus interface. Each IC includes BC, MT, and RT, allowing for simultaneous operation with any combination of 1553 functions. Valid terminals communicate with the MIL-STD-1553 bus via a shared on-chip dual bus transceiver and external transformers. There are four types based on functionality: - HI-6138: BC, MT, RT - HI-6137: BC, RT - HI-6136: MT, RT - HI-6135: RT Users can allocate 16KByte (8K×17Bit words) of on-chip SRAM between devices according to application requirements. The HI-613x communicates with the host via a 40MHz 4-wire SPI. Programmable interrupts provide terminal status to the host processor.

• Other electronic parts

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

This handy book clearly illustrates the variety of Parker cartridge valves, which come in a rich selection of models. The contents include a handbook featuring "check valves," "shuttle valves," "pressure control valves," "logic valves," "flow control valves," "pressure relief valves," "solenoid valves," "directional control valves," and "proportional valves," among others.

We are conducting a productivity improvement special campaign until the end of March 2025. Customers considering upgrading or adding rotary evaporators are encouraged to take advantage of this opportunity. The "Rotary Evaporator R-300," equipped with high-performance control and an electric lift, is available at a campaign price, including accessories such as a foam sensor that enables bumping prevention. Please check the flyer for more details. 【Target Products (Excerpt)】 ■ Rotary Evaporator R-100 ■ Rotary Evaporator R-300 (High-performance control type) ■ PTFE Diaphragm Vacuum Pump V-300 ■ PTFE Diaphragm Vacuum Pump V-600 (High vacuum type)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.