BrandyWine Systems Time Server PTP-8080

The PTP-8080 is a time server that supports NTP/PTP synchronization protocols equipped with a GPS receiver.

Equipped with a high-precision GPS receiver with time synchronization of 50ns or less. Supports both NTP and PTP synchronization protocols. PTP offers high precision of less than 20ns per network hop. 8-port Gbps output supporting network management protocols. Wide operating temperature: -40℃ to +70℃. Equipped with redundant power supply. *BrandyWine offers a wide range of time servers. Please feel free to contact us for more information.

• Other server related

SAASM GPS receiver with a built-in 12-channel time server.

19-inch rack-mounted time server supporting IEEE-1588v2 high-precision time protocol.

• Other network tools

The environmentally resistant small time server is a device that can synchronize with various time sources with high precision.

• Flight level robustness • Supports IRIG-B, GPS-Have Quick, NTP, and PTP as time sources • Offers two lineups: TCP-AS and TCP-AM • A wide selection of supported options is available.

• Other server related

Achieve lightweight and easy real-time network capture!

- 10/100/1G bps full capture - Powered via USB 3.0, no adapter required - Connects to PC via USB 3.0 - Hardware timestamp with 8ns resolution - Real-time display using analysis software like Wireshark - Capable of statistical analysis including CRC errors and frames - Directly saves to the computer's SSD/HDD using dedicated tools - Compatible with Windows 7/8/10 (32/64bit), Linux, and MAC OS - Made in the Netherlands *The ProfiShark series includes: 1G Plus: with GPS (supports time synchronization via GPS) 10G: 10G type. *By connecting to a NAS, it can also support long-duration continuous capture.

• Server monitoring and network management tools

Capture, save, and analyze all in one device! Compact and lightweight, with remote access and management capabilities!

- 1G: 10/100/1G bps, 10G: 1G/10Gbps full capture - Built-in 1TB storage (expandable via USB) - Hardware timestamp with 8ns resolution - Built-in traffic analysis software, capable of flow-based analysis - Capable of analyzing over 200 applications/protocols (Office 365, Skype, Netflix, etc.) - Can be taken on-site and capture can be started with a button press - Designed to isolate the capture interface from the control port, internal storage, and analysis processing unit to ensure the safety of the target network - Equipped with a fail-safe function that quickly restores the link when the main power goes down - PoE passthrough allows capture from lines powered by PoE - Available in portable and rack-mounted types, with options for DC12V and DC24-48V - Maximum network latency: 1Gbps: 400ns, 100Mbps: 660ns, 10Mbps: 6600ns - 12V power or 24-48V power * There is also a lineup of 10G (SFP+) rack-mounted types available.

• Server monitoring and network management tools

The low-voltage fuse "SBFC-MS2" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. It is particularly effective for devices in automobiles where the current temporarily spikes. For example, it protects power window motors, which may blow regular fuses due to the large current that flows temporarily during startup. It is recommended for those facing circuit protection challenges in the automotive and construction machinery industries, as well as for low-voltage fuses (below DC70V).

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.