■JIMTOF2020 Online■ Exhibiting unique overseas machine tools and peripheral equipment!

Improve processing accuracy of existing equipment with non-contact measurement! Calibration laser 3D probe for 5-axis machining centers.

The "α1" is a laser 3D probe that significantly reduces the calibration time of 5-axis machining centers. <Features> ■ No wear on glass spheres ■ Easy attachment and detachment for simple setup ■ Minimizes errors from contact measurements ■ Significantly reduces calibration time compared to touch probes While a touch probe typically measures 5 points at one position, this laser 3D probe can measure the positions of reference spheres in three directions mounted on the table all at once. This greatly reduces the number of measurements during calibration, and the non-contact measurement by laser prevents scratches and wear on the glass spheres. ◎ For more details, please refer to the PDF document or feel free to contact us.

• Machining Center
• probe

Space-saving design! Vertical machining center capable of simultaneous 5-axis machining.

The UMC series vertical simultaneous 5-axis machining center from Haas is the most compact and affordable model. It features a self-developed high-speed spindle with a maximum rotation speed of 15,000 min-1, and a φ400 mm rotary table that newly adopts cycloidal gear drive, achieving high precision and high rigidity in the control of the rotating axes (B and C). It comes standard with a side-mount tool changer that holds 30 tools plus 1 additional tool (with an option to accommodate up to 50 tools). Additionally, it is equipped with a Renishaw touch probe and calibration fixtures as standard, allowing for easy setup. It offers the best cost performance among simultaneous 5-axis machining centers. 【Features】 ■ Reduces setup time for multi-surface machining and complex part processing ■ Improves machining accuracy ■ Provides excellent cost-effective solutions ■ Offers a wide range of high-productivity options

• Other machine tools
• Machining Center

A wide variety of products including machining centers and lathes are featured!

This catalog features products from HAAS, handled by NK Works. We offer a wide range of products, including "Vertical Machining Centers," "Horizontal Machining Centers," "Rotary & Trunnion Tables," and "NC Lathes." Additionally, we provide a Q&A section addressing frequently asked questions about HAAS products. 【Featured Products】 ■ Vertical Machining Centers ■ Horizontal Machining Centers ■ Rotary & Trunnion Tables ■ NC Lathes *For more details, please refer to the PDF document or feel free to contact us.

• lathe
• Machining Center

Vibration-damping boring bars that exhibit vibration-damping performance regardless of materials and processing details.

Sweden's MAQ (Mack) Company Manufactured Vibration-Damping Boring Bar This is a reasonably priced and simple vibration-damping boring bar that uses a patented high polymer material internally. <Features> ■ "STMD Tool" that performs self-tuning based on vibration frequency ■ The support part of the mass damper uses a patented high polymer material ■ Achieves improved surface roughness and tool life regardless of processing content or materials MAQ's vibration-damping boring bar "STMD" tool can reduce vibrations through its internal mass damper. The mass damper is supported by a patented high polymer material that can change its "hardness" based on vibration frequency. This allows the polymer to adjust its "hardness" to provide appropriate damping effects against vibrations during processing. This tool, capable of "self-tuning," contributes to improved surface roughness and tool life, regardless of changes in processing content or materials. ◎ We also offer demo support! Please feel free to contact us.

• lathe
• byte
• Milling

Quick change system vise and base 'RockLock' for 3 to 5 axis machining centers, patented.

5thAXIS Quick Change Vise & Base A wide range of small to large vises. Minimal interference and high clamping force. This is a quick change vise that can be utilized in various situations. <Features> - A "Quick Change Vise" specialized for 3 to 5-axis machining centers with minimal interference. - Allows for quick setup changes when combined with the "Quick Change Base" fixed to the table. - By machining a dovetail (groove), it can clamp powerfully with just a 3mm gripping margin. We have prepared applications that can be utilized in various situations with the RockLock base, which is compatible with many systems. The small, high-clamping dovetail system is also well-received. It is effective in situations involving multiple parts using 3 to 5-axis machines. ◎ We also offer demo support! Please feel free to contact us.

• Processing Jig
• Machining Center
• Vice Clamps

Vibration accuracy of 0.015 mm or less! Achieving long tool life. A flexible high-precision tool chuck that can be used for various tools with just one.

The Mimatic company's "Precision Chuck" is a holder that can easily accommodate all cutting tools and shank diameters with just one holder. It provides sufficient torque to withstand milling and grooving cutters. 【Features】 ■ Guarantees runout accuracy of less than 0.015mm, reliability, and tool life ■ Ensures secure clamping of the tool shank to the chuck with particularly high clamping force ■ Flexibly usable for various tools such as drills, reamers, countersinks, and side milling <Recommended for> - Those who use a wide range of tools with different types and sizes for various machining tasks - It can be cumbersome to prepare multiple collets for each tool... ➡ You can flexibly use various tools with just one Precision Chuck! We offer high-performance and standard types depending on the machining content. We accommodate various shank shapes including BT and HSK-A. ◎ For more details, please refer to the catalog or feel free to contact us.

• Other machine tools
• Machining Center

Ideal for non-destructive testing during product inspection and maintenance! Video probe equipped with high-resolution camera and 3D measurement capabilities.

Among the industrial endoscope lineup from Baker Hughes, the top model 'MViQ' achieves excellent image quality, detectability, and high functionality. It facilitates the easy detection of defects such as corrosion, blockages in pipes, and cracks, even from a distance. 【Features】 - Equipped with a very clear high-definition (HD) camera - 3D measurement function that enables accurate measurements from a distance - Ergonomically designed to be compact and lightweight - 360° precision-driven probe camera The 3D phase measurement function allows for measurement of objects in a three-dimensional representation rather than a flat plane. Additionally, there is no need to swap out dedicated adapters during observation and measurement, as both can be performed with a single 3D adapter, significantly contributing to improved work efficiency. Thanks to the 3D phase measurement technology that does not require screen splitting, a single optical adapter can measure a wide range (field of view angle of 105 degrees, measurement distance of 5–50mm or 15–100mm). It makes it easy to detect defects such as corrosion, blockages in pipes, and cracks, even from a distance. ◎ For more details, please refer to the catalog or feel free to contact us!

• Industrial Endoscope

Achieve excellent semi-dry processing with micro-particle coolant! MQL equipment from KNOLL, the world's leading coolant system manufacturer.

The Knorr semi-dry (MQL) device produces a very fine and stable coolant mist. 【Features】 ■ Excellent lubrication due to micronized coolant ■ Stability in machining accuracy and surface roughness, extending tool life ■ A wide range of supply patterns with up to 30 programs ■ Contributes to improving the working environment due to minimal coolant consumption By generating a very fine and homogeneous particle coolant mist, it demonstrates excellent lubrication performance. Since it uses almost no cutting oil, it significantly reduces coolant consumption and disposal costs. Additionally, the chips remain extremely dry, allowing for better chip evacuation and reducing cleaning time around the workpiece and machine. ◎ For more details, please refer to the catalog or feel free to contact us!

• Other machine tools
• Machining Center

Major machine tool manufacturer recruitment! High-pressure coolant pumps (below 15MPa) from KNOLL, the world's largest coolant system manufacturer.

This is a high-pressure coolant pump that has been adopted as a standard pump for high-pressure specifications of large machining centers from major machine tool manufacturers, with 65 units delivered to parts processing lines of major automobile manufacturers, among many other achievements. It is compatible with IE3/GB standards and more. 【Features】 ● Capable of up to 15 MPa ● A screw pump with constant flow and pressure without pulsation ● Compatible with both water-soluble and oil-based coolants ● Low noise and low vibration due to its screw type design ● Suitable for use with inverter motors, demonstrating energy-saving effects ● Proven track record in high durability specifications as well

• Other pumps
• Other machine tools
• Machining Center

Are you effectively using a CNC lathe with a Y-axis? ... Quick Flex (WTO) is a rotating tool holder that allows for tool tip changes in just a few seconds.

The Quick Flex developed by WTO is a tool holder that allows for quick change while directly using ER collets. Tool setup changes can be made without removing the tool holder from the turret. The dedicated fixing wrench (patented) enables the removal and installation of the quick change holder without damaging the spindle. It is compatible with turrets from various lathe manufacturers. *For more details, please contact us.

• lathe
• drill
• End Mills

Bruckner Corporation: High-Precision Tailstock with Proven Performance and Trust.

This is an introduction to the "Comprehensive Catalog of Bruckner's Tailstocks" handled by the industrial machinery trading company NK Works.

• lathe
• Grinding Machine
• Other cutting tools

This is a diaphragm chuck from Swiss Chuck (formerly Forkart Swiss). It adopts a zero-point system to achieve high repeat accuracy of the jaws.

In recent years, grinding machines have required holding devices that can fully utilize the machine's performance and enable efficient production. When it comes to precision chucks, nothing surpasses Swiss chucks worldwide. We have built a foundation of innovative technology in collaboration with renowned machine manufacturers. As a result, Swiss chuck products offer the highest level of precision, providing reliability and flexibility for applications. The air-driven diaphragm chuck 6VMCHP guarantees a repeatability precision of less than 2μm. During gripping, the retracting function ensures a firm contact with the end stop, allowing for precise machining under strict accuracy. It is also possible to perform coolant or air blow through the through-hole, and seating confirmation is available. The pneumatic rotary tube can be directly screwed into the chuck through the spindle interior.

• lathe
• Grinding Machine
• Gear cutting machine/Gear finishing machine

Essentials for manufacturing, maintenance, and repair rooms.

The Sannen Company's portable horn allows for easy and precise honing operations using your existing drill press or electric drill. It is ideal for finishing hardened workpieces that are too large in diameter or difficult to process with standard tools. 【Features】 - Honing can be performed with a drill press or electric drill. - It is used for finishing hardened workpieces that are too large in diameter or difficult to process with standard tools. - It can achieve a machining dimension tolerance of 0.01 to 0.02 mm in a short processing time. - It enables easy and precise finishing and honing operations. Finishing operations with a machining dimension tolerance of 0.01 to 0.02 mm can be completed in a short time, making it an essential tool for manufacturing, maintenance, preservation, and repair sites. For more details, please refer to the catalog or feel free to contact us.

• Grinding Machine
• Other machine tools

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

[Speaker] Toshio Fujimura, Ph.D. (Engineering) Representative, Touson Automotive Strategy Research Institute Automotive and Environmental Technology Strategy Analyst Visiting Professor, Aichi Institute of Technology [Former Toyota Motor Corporation] [Lecture Topics] <Chapter 1> Urgent Issue: CO2 Reduction Cannot Wait! <Chapter 2> Achieving a 48% Reduction in CO2 by 2030 Compared to 2019 is Impossible Without Carbon Neutrality in Fuels as Well as Electricity <Chapter 3> Technical Challenges in Electrification <Chapter 4> Pathways to Achieve a 48% Reduction in CO2 Emissions from Owned Vehicles by 2030 <Chapter 5> The Intentions Behind Electrification Strategies of Various Governments (Mainly in Europe, the U.S., and China) <Chapter 6> Electrification Strategies of Major Global Automakers and Sales Trends in Different Regions: Which Manufacturers Will Survive by 2030? <Chapter 7> Conclusion

[Speaker] Masayuki Sawada, Director of Sawada Masayuki Engineering Office [Lecture Topics] 1. The battle in Ukraine is the first large-scale drone war in history. 2. The battle in Iran also sees drones shifting the paradigm of strategy and tactics. 3. Efforts by major European countries (producing drones in Ukraine and collaborating with Ukrainian drone manufacturers). 4. Efforts by the United States (providing intercept drones and other support to Ukraine). 5. Efforts by Taiwan (producing drones in collaboration with U.S. manufacturers that have combat experience in Ukraine). 6. Efforts by Japan's Ministry of Defense (establishing a multi-layered coastal defense system using drones [SHIELD]). 7. Efforts by Japan's Terra Drone Corporation (collaborating with Ukrainian drone manufacturers). 8. Q&A / Business card exchange.