Reiwa 2nd Year "Molding Technology" Publication Information

We will cooperate to evaluate whether our processing is appropriate using environmentally friendly water-soluble coolants for cutting and grinding, aiming to improve tool life and processing accuracy!

We will investigate whether this processing condition is good or bad, examining the state of cutting and grinding processes, and assist in achieving a better condition. [1] We will inquire about the processing conditions during cutting and grinding and conduct a current state analysis. - Observation and evaluation of the processing tools - Observation and evaluation of the processed chips - Observation and evaluation of the processed workpieces - Vibration evaluation of the machine tools and jigs used for processing - CAE analysis as needed - Chemical analysis of the coolant (water-soluble coolant) [2] We will convert the dilution water of the coolant into reform water for improvement analysis. - Quantitative comparison analysis of each item [3] Investigation of tool life, processing accuracy, and coolant life - Regular analysis - As necessary, we will conduct joint research with academia and perform quantitative analysis. After the current state analysis, once the processing conditions stabilize, we recommend using reform water KN1 for the dilution water of the water-soluble coolant to enhance cooling properties and reduce the coefficient of friction during processing. We provide one-stop advice from the perspectives of coolant, work material, tools, and machine tools. We are actively visiting areas such as Gunma, Saitama, Nagoya, Osaka, Shizuoka, and Okayama. *Please feel free to contact us for more details.

• lathe
• Grinding Machine
• Cutting Oil

High-performance reform water containing nanobubbles.

It enhances lubricity and cleaning properties. It is used at a concentration similar to that of the original water-soluble coolant. When the processing fluid begins to deteriorate, this KN3 can be used to restore it to a good processing condition.

• lathe
• Milling machine
• Grinding Machine

The coolant concentrate is used as is! Changing the water for dilution makes it more effective! The odor is eliminated, and it is environmentally friendly, supporting SDGs.

It is used as a diluent for water-soluble cutting fluids used in cutting and grinding processes. By reducing the friction coefficient during cutting and lowering the temperature, it can extend tool life and increase cutting speed. It can also suppress the growth of anaerobic bacteria, making it less likely to produce foul odors and nearly eliminating waste liquid. By using this water, the need for coolant replacement, which is done more than once a year, is eliminated. You only need to add the amount of coolant that evaporates daily. This can significantly reduce waste disposal costs, making it environmentally friendly for both the planet and the company. If your company is struggling with the odor of water-soluble coolants, please feel free to contact us.

• lathe
• Grinding Machine
• Cutting Oil

Reform water-soluble coolant to achieve high cutting and grinding performance! Improvements in lubrication and cooling performance, elimination of coolant replacement, and reduction of environmental impact are possible!

The Clean Tank System circulates the original cutting fluid between the machine tool and the reform water purification device while purifying it, ensuring the retention of high processing performance, lubrication performance, and cooling performance of water-soluble coolant cutting fluids. To provide cutting fluids with the appropriate properties required by our customers, we have formulated a cutting fluid by mixing reform water KN1 and KN3 with cutting oil in the appropriate ratios. This cutting fluid becomes a customer-specific original cutting fluid that excels in improving processing accuracy, extending tool life, and reducing the generation of waste cutting fluid. 【Features】 ■ Significantly improved cooling efficiency for tools and workpieces ■ Enhanced quality due to improved processing accuracy ■ Longer tool and machine lifespan (proven to extend tool life by more than five times) ■ Substantial reduction in the hassle and cost of disposing of chips and sludge ■ Elimination of the foul odor unique to water-soluble coolants, improving the working environment ■ No need for coolant replacement, contributing to environmental sustainability We are a company committed to SDGs! *For more details, please feel free to contact us.

• lathe
• Other cleaning machines
• Other water treatment equipment

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!