Exhibition: We exhibited at the IIFES 2022, a comprehensive exhibition of cutting-edge technologies in automation and measurement.

Achieve fast response with the laminar flow method (differential pressure type)! A wide range of models is available from low flow to high flow. Current delivery time is 4 weeks.

The "M Series" is a mass flow meter manufactured by ALICAT that can measure 98 types of gas flow rates, including mixed gases, with a single unit. It provides accurate flow measurement of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10 ms to quickly follow flow changes. In addition, the lineup includes the "MS Series," which supports 130 types of gases including corrosive gases and refrigerants, and the "MW Series," which can measure with extremely low differential pressure. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

AriCat BIO Series! Reliable, adaptable, and compatible flow control.

The 【BIO Series】 is a mass flow controller manufactured by ALICAT that features a laminar flow method (differential pressure type) with a fast response time of 10 ms. - Long-term stability: Extremely low zero drift - Assurance against process water contamination - High contrast, clear display - ASME (American Society of Mechanical Engineers) recommended: 316L stainless steel and USP Class VI, FDA (Food and Drug Administration) grade elastomers - Gas selection switching possible without recalibration and without loss of accuracy - Industrial Ethernet - Wide range flow: 1 SCCM to 5000 SLPM - Response speed of 10 ms enables high-speed data recording - Flexible process connection (SAE standard)

• Other measurement, recording and measuring instruments

Supports mixed gases! Standard features include analog output, RS-232C communication, and a backlit LCD display. Current delivery time is 4 weeks.

The "MC/MCP/MCR series" is a mass flow controller manufactured by ALICAT that can handle 98 different types of diverse gases with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer a lineup that supports 128 types of gases, including corrosive gases and refrigerant gases, such as the "MCS/MCRS series," "MCW/MCRW series," and "MCV/MCVS series." 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS 232C communication ■ Supports mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieve high-speed response with the laminar flow method (differential pressure type)! A wide range of models is available, from low flow rates to high flow rates. Delivery time is approximately 4 weeks.

The "MB Series" is a portable mass flow meter manufactured by ALICAT that can measure 98 types of gas flow, including mixed gases. It offers accurate flow measurement with an accuracy of ±(0.8% Reading + 0.2% F.S.) and a fast response time of 10 ms to quickly follow flow changes. In addition, we offer the "MBS Series," which supports 130 types of gases including corrosive gases and refrigerants, and the "MWB Series," which can measure with extremely low differential pressure. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieving fast response with the laminar flow method (differential pressure type)! A lineup is available from 0.5 CCM to 10 LPM.

The "L Series" is a liquid flow meter manufactured by ALICAT that features a laminar flow method (differential pressure type) with a high-speed response of 20 ms. It quickly follows changes in flow rate, allowing for real-time flow rate monitoring. The flow range is 50:1 from 2 to 100% F.S., with the 0.5 CCM type capable of measuring from 0.01 mL/min. It comes standard with external outputs of 0 to 5 VDC and RS-232C communication, and includes a NIST traceable inspection certificate. Additionally, we offer liquid flow controllers in the "LC/LCR Series" and a portable type with an optional battery. 【Compatible Liquids】 Pure water, methanol, isopropanol, ethanol, ammonia, dimethyl ether, isopentane, thiophene, iso-octane, heptane, acetone *Other compatible liquids may also be available. 【Features】 ■ 20 ms high-speed response / 100 ms control response ■ ±2% F.S. flow accuracy ■ From 0.5 CCM to 10 LPM ■ Display with backlit LCD ■ Standard analog output and RS-232C communication

• Other measurement, recording and measuring instruments

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK