FOOMA JAPAN 2021 International Food Industry Exhibition

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher
• Crusher/Mill

Fusing the principles of traditional stone mills with modern ideas. Easy maintenance as well.

A small milling machine that combines the traditional principle of a stone mill with the latest modern technology. It is an amazing high-tech stone mill that can grind down to ultra-fine powder.

• Food Processing Equipment
• Crusher

Small body, high power. A formidable high-tech stone mill that can grind down to ultra-fine powder.

Micropowder is a "small milling machine" that combines the traditional principle of a stone mill with modern ideas and the latest technology. It can grind dried ingredients into ultra-fine powder, producing high-quality powder with uniform particle size due to the stable up-and-down movement of the lower millstone. You can easily adjust the desired particle size using the dial setting for particle size adjustment. Additionally, the alteration of ingredient components and flavor degradation caused by milling has been a significant challenge. By controlling the friction heat during milling with circulating cooling water and applying a cut-and-grind method based on the stone mill principle, we have eliminated the alteration of ingredient components and flavor degradation. ● For more details, please download the catalog or contact us.

• Fine grinding machine

Easy operation and simple configuration. Speed can be selected according to the materials! Designed with safety measures in mind during operation.

The "Ribbon Mixer" is an easy-to-handle mixing machine with a simple structure. By rotating the ribbon while supplying raw materials and discharging them, it reduces the load at startup, allowing for mixing with a small amount of power. This contributes to reducing equipment costs and running costs. We can also accommodate custom specifications such as casing jackets, integrated weighing devices, and inverted main bodies (small size) according to your requests. 【Features】 ■ Custom-made capacity and shape are possible ■ No leakage of powder and granules outside the process ■ Small installation area and low height ■ The top cover can be adapted for supply port installation as desired ■ A sanitary type that allows for complete cleaning is also available * For other functions and details, please download and view the catalog. Feel free to contact us as well. * Test machines are also available! We are ready with test machines to meet your needs for crushing, classification, sorting, and transportation. ★ Exhibited product at the "International Powder Technology Exhibition Osaka 2021"

• Mixer/agitator

Fully cleanable mixing machine, ribbon mixer, sanitary specifications.

A mixing machine with a body casing that has a fully welded structure and can be completely cleaned. ■Features■ ■ The case is designed with a fully welded structure and a clever connection of the shaft to achieve complete cleaning. ■ The ribbon part is also designed with cleaning in mind. ■ The seals in the bearing section are made of a two-part resin for easy removal. ■ Volume: 50 to 1,500 liters (actual capacity). ■ Discharge methods: slide gate, swing gate, choke valve. ■ Materials: contact parts made of SUS304/316/316L; seal resin made of nylon and others. ■ For other functions and details, please download the catalog or contact us.

• Mixer/agitator

Just set up the commercially available stainless steel container! It enables soft mixing and three-dimensional mixing and stirring.

The pot blender (swing type) is a small-scale mixing machine that uses commercially available stainless steel tanks. It is ideal for mixing tasks that require frequent product changes, as the containers are easy to remove and replace. Cleaning is straightforward, and since it uses standard stainless steel containers, there is no need to transfer the mixture after blending. The entire container rotates slowly, allowing for gentle mixing. The mixing time can be easily set, enabling mixing tailored to the raw materials. 【Features】 - Addresses safety concerns and physical strain associated with manual labor - Mixing parts use commercially available stainless steel containers - Easy to set up for mixing tasks as it can be used as is - Simple container removal - Gentle mixing allows for soft materials to be blended - Simple structure makes maintenance easy *For more details, please refer to the catalog.

• Other powder equipment

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.

In the operation of drawings, do you face challenges such as "taking too long to find," "uncertainty about whether it's the latest version," or "high likelihood of confirmation errors"? By utilizing CADSUPER's barcode function (optional), you can reliably connect drawings and information, allowing for a smooth advancement of DX in drawing utilization. In this seminar, we will introduce how using barcodes can change: - Drawing management and search - Confirmation and cross-checking tasks - Information collaboration with the field This content is recommended not only for existing users but also for those considering improving the efficiency of drawing operations and reducing errors.

Daitō Shikō Co., Ltd. will be exhibiting at the "International Fire and Disaster Prevention Exhibition" held at Shirakawa Park in Nagoya City, Aichi Prefecture, from Thursday, May 28, 2026. At the exhibition venue, we plan to showcase goods that are perfect for fire prevention events and recruitment activities for members. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

[Speaker] Miho Ko Shimada, Partner Attorney, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] The movement towards the implementation of CCS, which is positioned as an essential technology for decarbonizing hard-to-abate industries, is gaining momentum in Japan. Among the "advanced CCS projects" selected for business commencement in the early 2030s, some pipeline projects have progressed to the exploratory drilling stage. For shipping transport projects, discussions are underway to create mechanisms for clustering CO2 sources and improving shipping transport efficiency. In this seminar, following the full enforcement of the CCS Business Act on May 22, we will organize the current state of the business environment related to CCS and examine the latest discussions at the Agency for Natural Resources and Energy and the Ministry of the Environment (based on information available at the time of the event) from a legal perspective as we consider the shape of CCS projects leading to Final Investment Decision (FID). [Lecture Items] 1. Current state of the business environment related to CCS 2. Overview of the CCS Business Act 3. Overview of the cost difference support system for CCS projects (pipelines) 4. Structural considerations through the CCS value chain 5. Q&A / Business card exchange