We will be exhibiting at the 31st West Japan Food Industry Creation Exhibition '21!

Reduces the effort and running costs for wrapping stretch film.

The stretch film automatic packaging machine contributes to reducing the labor and running costs by automatically wrapping stretch film around the cargo loaded on the pallet. We can provide information on turntable-type and self-propelled models. 【Effects of the Stretch Film Automatic Packaging Machine】 ■ Labor Reduction and Time Savings Since the machine wraps the stretch film, it achieves labor reduction, shorter working hours, and labor-saving. ■ Reduction in Running Costs By pre-stretching the film three times before wrapping, the amount of film used is significantly reduced compared to manual wrapping. ■ Prevention of Load Shifting The machine wraps the stretch film more securely than manual wrapping, preventing load shifting. ■ Transportation Safety The packaging is done according to a set program each time, allowing for safe and secure transportation by truck. ■ Dust and Water Protection The stretch film wrapped around the cargo protects it from dust and water droplets.

• palette

Visualize the movement of pallets and achieve efficient pallet transportation!

Visualize the movement of pallets and achieve efficient pallet transportation! The Smart Pallet is a cloud-based pallet management system that combines an active RFID tag that emits signals up to 300 meters and a reader that accurately receives those signals. It automates the management of warehouse inventory for pallets and cage trolleys, as well as tracking when items are stored or retrieved. [Features] - Battery life: Up to 10 years - Reading range: Up to 300 meters - Reading rate: Nearly 100% - Simultaneous identification of approximately 50,000 items *Varies by environment. Reading may take time. [Benefits] With the introduction of Smart Pallets, the movement of logistics equipment can be visualized immediately. This leads to the following benefits: - Automation of inventory and in/out management - Automation of stocktaking - Liberation from paper-based management By utilizing Smart Pallets, data regarding various movements of logistics equipment is accumulated. Analyzing this data reveals trends specific to each location. By grasping these trends and implementing measures, the following benefits can be achieved: - Elimination of lost or stagnant logistics equipment - Optimization of the number and placement of logistics equipment - Establishment of an efficient pallet recovery network - Reduction of labor costs and operational expenses.

• palette

We propose the optimal assist suit tailored to your work scene!

We offer a variety of exoskeleton assist suits designed to reduce the physical burden on workers' backs and bodies. 【Do you have any of these concerns regarding back strain?】 - Lifting and lowering heavy items or performing tasks in a bent or stooped position puts strain on the back, affecting work and daily life. - Workers leave their jobs due to tasks that put strain on their backs. - You want to hire more staff, but there are few applicants because of the high physical demands of the job. - The burden on the back and the departure of colleagues lead to decreased motivation towards the company and work. The assist suit can solve these problems! Since 2010, we have been developing assist suits and, based on knowledge gained from thousands of demonstrations, we at UPR provide clear proposals for those considering implementation. 【Effects of the Assist Suit】 - Reduces back strain - Creates a more comfortable working environment and prevents turnover - Improves work efficiency and productivity

• Other safety and hygiene products

This is a system that fully exempts you from the loss fee incurred in the event of losing a pallet by paying a loss guarantee fee in advance.

The rental pallet loss guarantee system is a program that fully exempts you from loss fees incurred when a pallet is lost. By paying the loss guarantee fee in advance, you will not incur any loss fees even if you lose a rental pallet. For example, if you lose a plastic pallet (Type 11, single-sided, four-way entry): - Normally, you would pay a loss fee of 6,700 yen per pallet (as of March 2024). - If you are enrolled in the "Rental Pallet Loss Guarantee System," the loss fee is 0 yen! *Please note that loss fees may vary depending on the specifications of the pallet. *The guarantee fee will be billed separately from the rental fee for the pallet. 【Benefits】 ■ No additional costs required When a rental pallet is lost, additional loss fees will typically apply. By using the rental pallet loss guarantee system, you will not incur any loss fees even in the event of a loss. ■ Assurance in case of unexpected loss It is unpredictable when and how many rental pallets may be lost. By utilizing the rental pallet loss guarantee system, you can fully exempt the loss fees for the pallets you are using, providing peace of mind in the event of an unexpected loss.

• Rental/lease

Just by installing the device, you can achieve "visualization" and "efficiency" in logistics!

Achieve 'visibility' and 'efficiency' in logistics just by installing the device! Nantsui is a solution that allows real-time tracking of the location, temperature, humidity, and impact values of various 'things' and 'equipment' by attaching a device to them. With just one device, you can collect various data and check it online. By using the collected data, it is also possible to conduct loss investigations and implement theft prevention measures. You can achieve 'visibility' and 'efficiency' in logistics without worrying about power supply or the need to build a new system. [Features] ■ Location information map display ■ Entry and exit monitoring ■ Temperature and humidity information graph display (temperature sensor type only) ■ Temperature and humidity data buffering ■ Emergency alert email sending ■ Impact information graph display ■ Low cost ■ API integration [Effects] ■ Streamlining management of transportation status ■ Delivery route analysis and optimization ■ Measures against loss, delays, and theft ■ Secure transportation of important documents, confidential materials, and various valuables ■ Improvement of transportation quality ■ Compliance with GDP

• Other information systems

Rent logistics equipment easily, just as much as you need when you need it.

It is recommended to rent pallets, cage trolleys, and racks. The benefits of renting include the convenience of "using only what you need when you need it" and the ability to use them in a way that suits your needs. There is no need to hold a certain quantity for busy periods, and by renting the necessary amount during the required time and returning it afterward, multiple companies can effectively utilize a single piece of logistics equipment.

• palette

Weighing only 3.4 kg! A power-type assist suit that can be utilized in a wide range of industries.

"Support Jacket Ep+ROBO" assists independently with the angle of the waist using motors on both sides. Sensors detect the wearer's movements and automatically assist the necessary parts. Since the left and right motors operate independently, they can respond to all body movements. **Features of the Support Jacket Ep+ROBO** - Weighs only 3.4 kg: Designed to be fixed around the pelvis with a waist belt, so the wearer hardly feels any weight on the shoulders. - Automatically switches between three modes: 1. Assist Mode (Rising Assistance) Detects the action of lifting objects with sensors and assists in lifting the body using motor power. 2. Keep Mode (Forward Bend Assistance) Assists in supporting the body during tasks such as lowering objects, working in a crouched position, or maintaining a forward-leaning posture. 3. Walking Mode Automatically switches during movement and does not hinder walking. - Easy adjustments with a button at hand Each mode can be adjusted in three levels with a single button. 1. Assist Button: Adjusts the assistance strength for rising. 2. Keep Button: Adjusts the assistance strength for forward bending. 3. Speed Button: Adjusts the response speed of the device in assist mode (function to match the device's response speed with the working speed).

• Other safety and hygiene products

By simply installing the device, achieve "visibility" and "efficiency" in international logistics!

【Specifications】 - Size (L×W×H) 122×93.5×22(mm) - Weight 233g - Operating Time 15-minute intervals: approximately 2 weeks *Varies depending on external temperature, signal conditions, battery degradation, and other usage environments. - Communication Standards Global coverage with LTE-M, NB IoT, 2G - Positioning Cell-based (cell tower-based) location information - Emission Conditions Selectable on the system between a minimum of 5 minutes and a maximum of 6 hours - Power Supply Lithium polymer battery - Waterproof and Dustproof Compliant with IP64 foreign object intrusion protection grade (waterproof) - Sensors Capable of acquiring 6 types of information (location, temperature, humidity, impact, ambient light, atmospheric pressure) *Temperature data can be obtained in the range of -20 to 60℃, and impact alerts can be detected in the range of 2 to 15G - Charging Accessories Supports charging via USB (for single unit) - Notes - Supports over-the-air (OTA) remote diagnostics/software updates - Tamper-proof feature - Flame-retardant plastic structure - Compliant with "Do-160G sec. 20,21 Cat. H,M,P"

• Other operation management software

To prevent falls and drops during loading and unloading, high-altitude work, and truck washing, etc.

The work platform with handrails is effective as a measure against labor accidents such as falls during loading and unloading operations in the transportation industry. The occurrence of fall and slip accidents is often due to: - Falling from the edge of the loading platform - Feeling danger from unstable loads - Areas within customer or transport sites It is necessary to be prepared for accident prevention on a daily basis. According to the Labor Standards Inspection Office of the Ministry of Health, Labour and Welfare, the measures to prevent fall accidents during loading and unloading operations are outlined in Article 151-67 of the Labor Safety and Health Regulations, which states in the manual, "When ascending or descending between the floor surface and the top surface of the load on the loading platform, equipment for that purpose must be used." Our work platforms come in various sizes and types, and we also accommodate semi-custom options to suit the specific needs of the site.

• Other safety and hygiene products

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

Metal 3D printers are becoming increasingly diverse, with relatively affordable low-cost machines available for several tens of millions of yen, as well as binder jetting technology that enables mass production of parts. High-speed, large-scale machines for creating large components and products are continuously being introduced to the market. Furthermore, the prototyping of magnesium parts and the manufacturing of copper components, which were difficult to produce with existing technologies, have begun. Metal 3D printers eliminate the need for molds by allowing products to be created directly from 3D data. They enable the creation of complex shapes that were impossible with traditional processing methods, as well as lattice and porous structures, hollow structures, and hybrid structures. This leads to the innovative creation of metal parts and molds that are not available from conventional sources, significant reductions in prototyping and manufacturing time, drastic decreases in the number of parts, lightweight miniaturization, and reductions in manufacturing processes and workforce. Using metal 3D printers, we provide easy explanations for those considering the development of attractive new products, the creation of new businesses, differentiation from existing products, significant reductions in prototyping and manufacturing time, dramatic decreases in the number of parts, and cost-effective lightweight complex-shaped components, as well as for beginners who are interested. The world is energetically investing in metal parts and mold manufacturing as the leading candidate for the next generation, and mass production of parts has also begun in earnest. Manufacturing parts with metal 3D printers will become commonplace in a few years.

In this seminar, we will briefly explain various molding methods and technologies for plastic molds using metal 3D printers, key points and considerations in manufacturing, and examples of molding. Following this, advanced users utilizing metal 3D printers from EOS, 3D Systems, Sodick, and Matsuura Machinery will discuss cutting-edge mold manufacturing technologies and cases, as well as the factors behind failures and secrets to success. First, we will explain molding cases that have achieved low-cost, high-quality manufacturing techniques and shortened lead times through complex shapes and integrated molding, hybrid molding, and 3D cooling water pipe molding using EOS metal 3D printers at J-3D. Next, we will discuss ODEC's achievements in drastically reducing lead times and costs in mold updates by manufacturing complex molds for resin molding with metal 3D printers, as well as the latest molding cases and simulation technologies for internal structures (3D water pipes), water flow, and temperature. Finally, we will provide specific explanations of Sanko Gosei, the industry leader in plastic mold manufacturing technology using metal 3D printers, including remarkable reductions in mold cooling times through 3D cooling water pipe molding, and how porous molding effectively suppresses and prevents defects and troubles such as short shots and gas burns, along with examples of reduced injection times.

The complex shape modeling, integrated modeling, lattice/honeycomb structure modeling, porous structure modeling, hybrid structure modeling, direct modeling from 3D data, as well as topology optimization and collaboration with generative design, which were difficult with conventional processing methods and technologies, can lead to the creation of innovative aluminum parts that are not available from traditional or other companies. This includes rapid development, prototyping, and modeling of parts, dramatic reductions in the number of parts, ultra-lightweight and compact designs, and significant reductions in costs, manufacturing time, number of processes, and workforce. In this seminar, pioneering users such as J.3D, ODEC, and the pioneers of white copper, who are utilizing metal 3D printers to rapidly develop, prototype, and manufacture complex aluminum parts, will provide specific explanations on key points and precautions for implementation and utilization, various modeling methods and technologies, unique next-generation AM technologies developed in-house, and groundbreaking modeling examples that significantly differentiate from other companies, sharing both success and failure stories. With the remarkable advancements in metal AM technology, the use of metal 3D printers for aluminum part modeling and manufacturing will become commonplace in a few years. The secrets to success will be explained in an easy-to-understand and concrete manner by instructors with numerous research achievements and extensive modeling experience, aimed at those considering implementation, beginners with interest, and those who are new to the field.