[New Product] No need for cutters or scissors - square bubble cushioning material that can be cut by hand, "Spasupa (Puchipuchi)"

◇ The bubble sheet has become square-shaped particles. ◇ No tools needed; you can cut it straight by hand. ◇ Since no tools are used, it is also possible to reduce the occurrence of work-related accidents.

2021 Good Design Best 100 Award 2021 Good Focus Award (Technology and Heritage Design) A new type of bubble sheet that allows for easy tearing, called "Spasupa." It can be cut by hand from thick grooves. Both during packing and unpacking, it can be cut by hand without the use of scissors or cutters. 【During Packing】 Once you estimate the size, you can cut it immediately by hand. 【During Unpacking】 Since it can be cut by hand, you can check the contents anywhere, anytime. *Note: To prevent tearing during packing, there may be some areas that are difficult to cut depending on how you cut. *Tips for Spasupa Cutting 1. Start by applying firm pressure to create an initial cut in the groove. 2. Cut straight.

• Other consumables
• Other packaging materials
• Packaging materials

Refreshing young grass color! Contains approximately 15% green polyethylene, reducing CO2 emissions by over 5%.

"BioPuchi" is a refreshing young grass-colored bubble wrap made from "green polyethylene" derived from sugarcane (Braskem). By incorporating approximately 15% green polyethylene, it is possible to reduce CO2 emissions by more than 5% compared to conventional materials. This product can significantly contribute to the prevention of global warming, which is partly caused by CO2. 【Features】 ■ Refreshing young grass color ■ Reduces CO2 emissions by more than 5% ■ Significantly contributes to the prevention of global warming, which is partly caused by CO2 ■ Green polyethylene is considered carbon neutral because the sugarcane used as the main raw material absorbs CO2 during its growth stage, resulting in zero CO2 emissions when incinerated as waste. *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material
• Packaging Bags
• Other packaging materials

Featuring a wide range of products, including standard items and excellent bubble sheet for insulation and heat retention!

This catalog is a comprehensive catalog of "Bubble Sheet," which protects packaged items from impact, handled by Kawakami Sangyo Co., Ltd. It features a rich lineup including the classic "Bubble Sheet," "Bio Bubble" made from sugarcane-derived "Green Polyethylene," and "P4," which has high compressive and tear strength. Please make use of this for selecting products. [Contents (excerpt)] ■Standard Products ■Environment ■High Strength & Durability ■Heart Shape ■Insulation & Heat Retention *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• Cushioning material
• Other packaging materials

Features: ● Equipped with ARM MediaTek Genio 700 / 510 ● Onboard LPDDR4 8GB ● HDMI 2.0 x 1, DP 1.4 x 1 ● eDP 2 lanes x 1, MIPI-DSI 4 lanes x 1 ● GbE x 1 ● USB 3.0 + 2.0 x 1, USB 2.0 x 5 ● UART x 4, GPIO x 12, MIPI CSI x 2, TPM 2.0 ● Fan-equipped heatsink, heatsink available separately ● Carrier board available separately

Features: ● Equipped with Intel Core Ultra 5 125H/7 155H ● LPDDR5 16GB onboard memory ● NVMe 128GB onboard storage ● eDP x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen2 x 2 ● PCIe 4.0[x1] x 4 ● 2.5GbE x 1 ● COMe Type10 standard, size 84mm x 55mm ● Optional items ECB-920A-0001: Development carrier board NANOCOM-MTU-FAN: CPU fan NANOCOM-MTU-HSP: Heat spreader (Note: Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 9 185H / 7 155H / 5 125H processors ● DDR5 5600MHz Dual Channel SODIMM x2 (up to 96GB) (sold separately) ● VGA switch DDI x1, LVDS colay eDP x1, DDI x2 ● USB 2.0 x8, USB 3.2 Gen 2 x4 ● PCIe [x1] x4, PCIe [x4] x1, PEG [x8] + [x4] + [x4] ● 2.5GbE x1 ● DC 9~16V input ● COM Express Type 6, 3.75 inches x 3.75 inches (95mm x 95mm)

By digitizing contract operations, you can reduce many costs, including stamp duty and mailing fees. ◆ Four Benefits of Electronic Contracts - Cost reduction for printing, stamp duty, mailing fees, and original document storage - Improved business efficiency through system-based sending and stamping - Prevention of tampering with timestamps - Enhanced document searchability 【Many Benefits for the Other Party as Well!】 - Both parties can confirm that the document has not been tampered with - No worry about losing the original paper documents - Increased operational efficiency due to the absence of mailing and binding hassles - Quick contract conclusion through email or system verification ◆ Disadvantages of Electronic Contracts - Costs for implementing and operating the service - Need to ensure that business partners understand electronic transactions ----------------------------------------------------- 　　Consult with paperlogic for electronic contract services! -----------------------------------------------------

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.