We have published the catalog for the 'Sanitary/CIP High-Temperature Cleaning Compatible Easy Installation Ultrasonic Flow Meter pflow UA102-Sani Series.'

Just clamp it in the piping and tighten the screws! Sanitary/CIP high-temperature cleaning compatible easy installation ultrasonic flow meter.

The "UA102-Sani Series" ultrasonic flow meter for sanitary/CIP high-temperature cleaning is an ultrasonic flow meter that achieves low cost, compact design, and easy installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: ■ Sensor and transducer separation type The detector part is non-contact with the fluid. ■ Compatible temperature: max. 150℃ Can also handle high-temperature fluids such as food cleaning (CIP) liquids. Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/output. For more details, please contact us or download the catalog.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

Just clamp it between the pipes and tighten the screws! No pipe processing required. Compact size integrated simple installation display device ultrasonic flow meter.

The "UA102 Series" integrated ultrasonic flow meter with easy installation display is an ultrasonic flow meter that achieves low cost, compact design, and simple installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: - Installation time is approximately 1 minute! - Capable of measuring a minimum of 4mm in diameter! - Easy installation of the flow meter body without the need for modifications to existing piping - Compact design with an integrated display - Requires almost no installation space - Usable for clean water, seawater, oil, chemicals, etc. - Maintenance-free due to non-contact with the liquid Four types are available in the lineup: 1. Integrated display type UA102 Series 2. Separate display type UA102-S Series 3. High-temperature separate display type UA102-HiT Series 4. Sanitary separate display type UA102-Sani Series Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in the passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/outputted.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

The insulating oil of old electrical equipment that has been in use for over 30 years may be contaminated with PCBs. Proper disposal is required by the disposal deadline. If you are using a vacuum tube oscillator, please check! - Transformers - Capacitors - Rectifiers, etc. Please consider updating any relevant equipment such as oscillators and hardening equipment as soon as possible. *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 ★ For inquiries by email, please contact: info@fujidenshi.co.jp *When calling or emailing, please mention "I saw it on Ipros." Response hours: Monday to Friday, 9 AM to 5 PM.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!