Published the sanitary/CIP high-temperature cleaning compatible easy installation type ultrasonic flow meter pflow UA102-Sani series.

Just clamp it in the piping and tighten the screws! Sanitary/CIP high-temperature cleaning compatible easy installation ultrasonic flow meter.

The "UA102-Sani Series" ultrasonic flow meter for sanitary/CIP high-temperature cleaning is an ultrasonic flow meter that achieves low cost, compact design, and easy installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: ■ Sensor and transducer separation type The detector part is non-contact with the fluid. ■ Compatible temperature: max. 150℃ Can also handle high-temperature fluids such as food cleaning (CIP) liquids. Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/output. For more details, please contact us or download the catalog.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

Just clamp it between the pipes and tighten the screws! No pipe processing required. Compact size integrated simple installation display device ultrasonic flow meter.

The "UA102 Series" integrated ultrasonic flow meter with easy installation display is an ultrasonic flow meter that achieves low cost, compact design, and simple installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: - Installation time is approximately 1 minute! - Capable of measuring a minimum of 4mm in diameter! - Easy installation of the flow meter body without the need for modifications to existing piping - Compact design with an integrated display - Requires almost no installation space - Usable for clean water, seawater, oil, chemicals, etc. - Maintenance-free due to non-contact with the liquid Four types are available in the lineup: 1. Integrated display type UA102 Series 2. Separate display type UA102-S Series 3. High-temperature separate display type UA102-HiT Series 4. Sanitary separate display type UA102-Sani Series Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in the passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/outputted.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.