Live Broadcast from the Exhibition Venue: Shinkies Live - International Powder Technology Exhibition Osaka 2021 Live Coverage from the Venue

For the stirring and defoaming treatment of materials in the research and development of pharmaceuticals and cosmetics. Simultaneous processing of up to 1.6 kg. Online demo available.

The "Awatori Rentaro ARV-931TWIN" is a rotational and orbital mixer that excels in stirring and degassing various materials, from low to high viscosity. With a dual unit system, it can perform vacuum processing of over 1.6 kg (NET 830g x 2 units), contributing to the efficiency of material stirring and degassing through simultaneous processing. 【Features】 ■ Stirring mode + maximum acceleration of 670G and vacuum atmosphere for simultaneous stirring and degassing ■ Achieves sub-micron level bubble removal ■ Rotational speed can be set according to the properties of the materials ■ Touch panel for easier condition setting ■ Communication function supports remote operation and traceability management *You can view product materials and the comprehensive catalog from "PDF Download." If you wish to request an online demo, please apply through "Contact Us."

• Mixer/agitator

A grinder that can crush materials from a minimum of 10mg to a maximum of 10g from micron level to 100 nanometers in as little as 2 minutes.

The Crushing Nano Taro NP-100 was developed using a rotational and translational method. It is a nano grinder capable of crushing small amounts of materials down to the 100-nanometer level in a short time. While dry grinding is theoretically difficult for particles smaller than 3 microns, wet grinding allows for nano grinding. 【Features】 ■ By grinding with a zirconia container and zirconia balls, contamination is minimized. ■ The chamber atmosphere can be cooled down to -20°C, allowing for safe grinding by suppressing temperature rise. ■ Materials and grinding media can be easily separated and recovered using a mesh filter after grinding. ■ Uniform dispersion of materials is possible after the separation and recovery of the media. ■ Batch processing improves workability during cleaning.

• Crusher

Adopting patented dispersion technology! Prevents variation and contamination, while also reducing running costs.

The "Dispersed Nano Taro PR-1" is an ultrasonic nano disperser that can safely and reproducibly disperse aggregated nanomaterials such as carbon nanotubes. With a container tilted at 45 degrees that rotates and emits ultrasound from two surfaces, the side and bottom, it utilizes a unique dispersion technology called "Dual Sonic Method" (patented) to achieve uniform dispersion. It addresses challenges such as reproducibility, variability, and contamination that arise when dispersing with ultrasonic homogenizers or ultrasonic baths. 【Features】 ■ Ensures safety by preventing material ejection or scattering due to the sealed container. ■ Only the container is a consumable, contributing to reduced running costs. ■ The built-in cooling system allows for temperature management of the water in the tank. ■ By emitting ultrasound from outside the container, it suppresses contamination. ■ Suitable for the dispersion and deagglomeration of CNTs, graphene, talc, silica, and more. *Please first check the materials by clicking the "PDF Download" button below. ★ Awarded the "Tokyo Venture Technology Excellence Award" at the Tokyo Metropolitan Government's World Dissemination Competition 2019. ★ Demo and evaluation tests are currently being accepted! If you are interested, please apply through the "Contact Us" section.

• Mixer/agitator
• Other polymer materials

Stirring of low to high viscosity materials and sub-micron level degassing. A rotary and orbital vacuum mixer equipped with a touch panel and communication functions.

The rotation and revolution method combined with vacuum degassing functionality allows for simultaneous mixing and defoaming/deairing, enabling the removal of bubbles down to the sub-micron level. Additionally, due to the centrifugal force generated during revolution, there is no spillage of materials during operation. The operation is as simple as setting the container and turning on the switch. 【Features】 ■ Simultaneous processing of mixing, dispersion, and removal of sub-micron level bubbles. ■ The rotation and revolution method combined with vacuum degassing functionality allows for high-precision defoaming without spillage during operation, in a short time. ■ Vacuum settings in units of 0.1 kPa, allowing for processing that takes into account the saturation vapor pressure. ■ Real-time display of progress and operating status on a touch panel. ■ Communication function (RS-232C connection) enables selection of setting conditions and starting/stopping of operation. ■ Sample source code (Python) for using the communication function is included.

• Mixer/agitator
• plastic
• Other polymer materials

Reiken Co., Ltd. will be exhibiting at "FOOMA JAPAN 2025," which will be held at Tokyo Big Sight from June 10 (Tuesday) to June 13 (Friday). We will showcase various chillers and temperature control devices (such as temperature control for mixer jackets). 【Event Overview】 ■ Booth Number: W4-32-21 ■ Exhibited Products: Chillers and temperature control devices

[Speaker] Masatoshi Fukuda, Director of the Management Planning Office, Tokyo R&D Corporation [Key Lecture Content] Focusing on next-generation mobility (robot taxis, buses, trucks), this lecture will organize the evolution of technologies and services in various fields based on reports from major exhibitions in Europe and the U.S. and experiences from actual vehicle test rides, following the flow of "overall picture → individual cases → insights," providing an overview of the latest trends. It will cover electrification (EVs, FCEVs, etc.) and the related technologies that support it, as well as the trends in vehicle, software, and sensor technologies for autonomous driving, sharing the changes observed in the field in Europe and the U.S., including new forms of public transportation services (operational forms and service content). [Lecture Items] 1. Introduction 2. ACT (Advanced Clean Transportation) EXPO 2025 Inspection Report 3. UITP Global Transport Summit 2025 Inspection Report 4. Busworld 2025 Inspection Report 5. Introduction of Autonomous Vehicles at CES 2026 6. Robot Taxi Test Ride Report 7. Q&A / Business Card Exchange

We held a preview event for our newly released latest device, "Micral." Micral is a next-generation solution equipped with the latest LIBS technology (Laser-Induced Breakdown Spectroscopy), achieving both "significant simplification of sample preparation" and "overwhelming analysis speed." It accommodates a variety of samples (matrices) such as food, feed, and dairy products, bringing innovation to on-site analysis operations. We wanted you to directly experience the operability and speed of Micral, so we invited customers to bring their own samples for measurement during this event. We hope that this can serve as a hint for improving the efficiency and safety of your analysis operations and be considered as one of the factors in your future equipment selection. For more detailed information, please contact Foss Japan. Phone: 03-5962-4811 Email: info@foss.co.jp

If production and logistics are managed separately in the factory, it can lead to negative consequences. This is the "key point of logistics improvement." For example, standard work instructions, standard times, and productivity management. What is normally done in the production process is not implemented in logistics. As a result, logistics can become a bottleneck, and it is not uncommon for the overall efficiency of the factory to decline. Why is "in-house logistics" important now? The government is promoting the optimization and efficiency of logistics as a social theme, and as part of this, the establishment of "logistics coordinators" is beginning to be required, starting with large businesses. It is predicted that this will eventually spread to medium and small enterprises as well. It is necessary to start improving in-house logistics now and to establish a strategic logistics management system. This course will lecture on what in-house logistics should do to achieve "overall efficiency of the factory." There is an order to logistics improvement. By incorporating exercises and thinking together, as well as discussing together, please internalize the methods for improving in-house logistics. *For more details, please download the PDF or contact us.

[Key Lecture Content] 1. Hydrogen Strategy in the Kawasaki Coastal Area Kawasaki City, Coastal Area International Strategy Headquarters, Growth Strategy Promotion Department Project Promotion Manager, Shota Nowada 1. Overview and potential of the Kawasaki coastal area 2. Leading projects in the Kawasaki hydrogen strategy 3. Overview of the Kawasaki Carbon Neutral Complex concept and its three pillars 4. Specific initiatives based on the Kawasaki Carbon Neutral Complex concept 5. Future directions 6. Q&A / Business card exchange 2. Energy and Economic Security Brought by Hydrogen ~ Challenge for Carbon Neutrality by 2050 ~ Kawasaki Heavy Industries, Ltd. Executive Vice President Energy Solutions & Marine Company President, Motohiko Nishimura 1. Current situation surrounding energy 2. Movement towards hydrogen utilization 3. Concept of the hydrogen supply chain 4. Efforts towards demonstration 5. Movements towards social implementation 6. Rules and economic security 7. Q&A / Business card exchange