For risk hedging against disasters, we recommend Teflon flexible pipes for seismic reinforcement of factories, earthquake measures for piping, and seismic measures for chemical lines.

It allows for large displacement absorption. It combines flexibility, pressure resistance, and cleanliness, making it suitable for various fluids.

The 【RY21】 series is a fully liquid-contact flexible joint made of Teflon (PTFE), designed for flange piping. The 【RY21M】 accommodates a 100mm offset, while the 【RY21L】 accommodates a 200mm offset, with each having its respective face-to-face setting. The exterior uses SUS blades to ensure pressure resistance, and many technologies have been integrated into the tube structure and components. It is compatible with various fluids such as ultra-pure water, pure chemicals, chemical wastewater, and high-temperature water. 【Features】 ■ Uses Teflon (PTFE) convoluted hose ■ Chemical resistance + flexibility + durability ■ Calculated pressure resistance performance with SUS blades ■ Flare processing that combines high technical capabilities ■ Ensures maximum effective length for each face-to-face distance ■ Conductive tubes are also available (RY41) *For more details, please refer to the PDF materials or feel free to contact us. *If you would like to receive the 'Tōkatsu Techno Latest Catalog Vol.1, Vol.2' by mail, please feel free to contact us through the Tōkatsu Techno website.

• Pipe Fittings
• hose
• Piping Materials

By making almost all reinforcement materials out of resin, we achieve both a reduction in corrosion risk and high flexibility over short spans simultaneously.

The 【RY26】 series is a fully liquid-contact Teflon (PTFE) flare convoluted flex with a resin exterior type. As 【RY26S】, we offer products that can be manufactured with the shortest face-to-face distance. By using PVC for the flange fittings and polypropylene for the exterior blades, we achieve both corrosion resistance and lightweight construction. Maintaining the versatility of the 【RY21】, it can be safely used even in environments where corrosive gases are likely to occur. 【Features】 ■ Uses Teflon (PTFE) convoluted hose ■ Chemical resistance + flexibility + durability ■ Pressure resistance and high corrosion resistance with resin blades ■ Technical expertise focused on ensuring effective length and flexibility ■ Adoption of resin flanges contributes to further weight reduction *For more details, please refer to the PDF materials or feel free to contact us. *If you would like to receive the 'Tōkatsu Techno Latest Catalog Vol.1, Vol.2' by mail, please feel free to contact us through the Tōkatsu Techno website.

• Pipe Fittings
• hose
• Piping Materials

A versatile hose that combines high flexibility and durability, making it user-friendly. Made in the UK. This hose is not subject to EAR U.S. export regulations. A non-applicability certificate can be issued.

The outer layer uses a hard wire blade, and the intermediate layer incorporates glass fiber, allowing for a wide temperature range from low to high. The liquid-contact part features a finely corrugated PTFE tube, achieving low reaction force and flexibility. There is also a conductive PTFE type (RH47/RH48), making it suitable for processes involving solvents and semiconductor materials where static electricity is a concern. 【Features】 ■ Uses fine corrugated Teflon (PTFE) corrugated hose ■ SUS hard wire blade (RH27/RH47) + spring (RH28/RH48) ■ High pressure resistance + durability + temperature resistance + flexibility ■ Achieves flexibility with low reaction force ■ Unmatched durability against repeated bending ■ Reliable durability through dedicated fitting crimping processing ■ UK-made hose ■ Not subject to U.S. re-export regulations (EAR) ■ Certificate of non-applicability can be issued *For more details, please refer to the PDF materials or feel free to contact us. *If you would like to receive the 'Tōkatsu Techno Latest Catalog Vol.1, Vol.2' by mail, please feel free to contact us through the Tōkatsu Techno website.

• tube
• hose
• Piping Materials

Added conductive functionality to the high durability and cleanability PFA straight hose. Hose fittings that contribute to improving the issues of poor charge and vacuum-resistant hoses.

The 【TH53】 is a hybrid hose fitting that incorporates high-purity carbon into both the inner and outer surfaces of the hose, adding static electricity prevention functionality. It reduces the risk of static electricity caused by liquids, solids, and powders. This hose is suitable for delicate manufacturing processes. Like the TH51, it features cold resistance, heat resistance, chemical resistance, and low elution properties, making it a flexible hose that can handle negative pressure, pumping, and suction. It is a reliable fitting for SIP/CIP processes. 【Features】 ■ Uses conductive EPDM/conductive Teflon (PFA) hybrid hose ■ Made with SUS double wire and nylon blade ■ Reduces the risk of static electricity ■ Significantly lowers elution risk due to the high-strength C-F bond of PFA ■ Complies with USP Class SIX standards ■ Ensured durability through specialized fitting crimping ■ Usable in various processes 【Applications】 Recommended for use in filling lines, aseptic lines, blood/bio preparations, and high-viscosity products in various manufacturing processes. 【Points】 Conductive Contributes to the improvement of processes facing challenges due to poor static electricity. Zero Elution Thanks to the highest strength C-F chemical bond that PFA boasts, it is virtually unaffected by elution from almost all fluids.

• tube
• hose
• Piping Materials

This is a multifunctional flexible type that achieves high durability and composite displacement absorption.

The R555/R556 uses Teflon (PTFE) for the wetted material and rubber flex for the outer material, enabling a significant improvement in durability while achieving displacement absorption. The R555 is suitable for standard spacing, while the R556 is compatible for short spacing, making it ideal for various piping and replacement of existing flex. By using Teflon (PTFE) for the wetted material, the leaching points of impurities are greatly reduced, and the adoption of rubber flex for the outer material eliminates the risk of leakage due to corrosion. **Features** - Wetted material made of Teflon (PTFE) and outer material made of rubber flex - Chemical resistance + vibration resistance + durability + corrosion resistance - Balances composite displacement absorption and strength - Guide bolts for suppressing expansion and contraction displacement can be installed *For more details, please refer to the PDF materials or feel free to contact us.* *If you would like to receive the "Tōkatsu Techno Latest Catalog Vol.1, Vol.2" by mail, please feel free to contact us through the Tōkatsu Techno website.*

• Pipe Fittings
• Piping Materials

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!