We exhibited at the Converting Technology Comprehensive Exhibition from January 26 (Wednesday) to January 28 (Friday), 2022.

We will peel off and clean the coating layer, such as ink coated on the film! This was developed for film recycling and contributes to the SDGs!

We have developed a device for peeling and cleaning ink and coated layers printed on film. By peeling and cleaning inks, etc., from the film (plastic), we contribute to the reuse of the film. *We have a peeling and cleaning testing machine installed in our company, so peeling tests can be conducted at any time. 【Flow of Plastic Reuse】 (1) Peeling and cleaning printed film rolled up in a roll using this device. (2) Pelletizing the cleaned film for reuse (recycling) or reusing it as is (reuse). 【Flow of Coating Layer Reuse】 (1) Peeling and cleaning printed film rolled up in a roll using this device. (2) Collecting the cleaning liquid mixed with the peeled layer and recovering the coating layer through filter filtration. 【Cleaning Process】 Unrolling ⇒ Immersion (cleaning aid) ⇒ Peeling ⇒ Cleaning (water) ⇒ Drying ⇒ Rolling 【Features】 ■ Peeling can be done with minimal scratches due to the peeling roll (patented). ⇒ The film can be reused without repelting after peeling, and it can also accommodate delicate substrates that are prone to breaking. ■ A circulation system is established in the tank, contributing to the reduction of running (disposal) costs for cleaning aids. ■ Compatible with single-sided printing, double-sided printing, and both types of printed films.

• Other processing machines
• Other cleaning machines

As short as 1 second! Automatically and instantly connects old materials with new materials! It supports both butt joints and overlaps.

This device can quickly and accurately connect the old substrate to the new substrate. The splice operation, which took about 7 seconds with conventional devices (butt joint), can be shortened to as little as 0.5 seconds with this device. As a result, the downtime during the splice operation is reduced, allowing for an accumulator-less splice using only the dancer roll. We have a coating and drying test machine, including the splice device, fully equipped in our clean room (Class 10,000), allowing customers to bring in their substrates for testing. 【Features】 ■ Patented ■ Splice operation shortened to a minimum of 0.5 seconds (joining takes a minimum of 1 second) ⇒ Production can be maximized with the old roll until the last moment, improving productivity ⇒ Allows for downsizing of the accumulator (switching to a dancer) * For more details, please refer to "Benefits of Speeding Up" ■ Both butt joint and overlap are possible ⇒ Butt joint is optimal for connecting laminated substrates ■ Enabled high-speed traverse (cutter operation) for excellent cutting performance ⇒ Can handle fragile substrates and thick materials.

• Other processing machines

Cleaning delicate materials such as optical films with minimal scratches!

This device removes dirt, dust, sebum, and grease that could not be eliminated by conventional ultrasonic or adhesive methods, using a combination of vibration and water flow (discharge and suction). It creates intense vibrations and water flow (discharge and suction) with a special three-layer structure (patented). The effect is that the liquid in the bathtub remains gentle while generating a synergistic effect of underwater vibrations and discharge/suction on the substrate. As a result, contaminants are dispersed in the bath, allowing for separation and discharge while preventing re-adhesion. The pass line is designed to avoid contact with the basket (punching) to prevent damage to the substrate (film). **Features** - Patented - Combination of vibration, water flow, and microbubbles - Removes dirt and dust, sebum, and grease adhered to surfaces - In the test machine, water is cut off with an air knife after cleaning, allowing for annealing and drying in an annealing furnace. Using microbubbles in conjunction promotes the aggregation effect and floating separation of dispersed contaminants. Additionally, the vibration mechanically breaks the microbubbles, further enhancing the effect. Hybrid means cleaning with both vibration and water flow (discharge and suction). *For more details, please refer to the PDF document or feel free to contact us.*

• Other processing machines
• Other cleaning machines

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

[Speaker] Toshio Fujimura, Ph.D. (Engineering) Representative, Touson Automotive Strategy Research Institute Automotive and Environmental Technology Strategy Analyst Visiting Professor, Aichi Institute of Technology [Former Toyota Motor Corporation] [Lecture Topics] <Chapter 1> Urgent Issue: CO2 Reduction Cannot Wait! <Chapter 2> Achieving a 48% Reduction in CO2 by 2030 Compared to 2019 is Impossible Without Carbon Neutrality in Fuels as Well as Electricity <Chapter 3> Technical Challenges in Electrification <Chapter 4> Pathways to Achieve a 48% Reduction in CO2 Emissions from Owned Vehicles by 2030 <Chapter 5> The Intentions Behind Electrification Strategies of Various Governments (Mainly in Europe, the U.S., and China) <Chapter 6> Electrification Strategies of Major Global Automakers and Sales Trends in Different Regions: Which Manufacturers Will Survive by 2030? <Chapter 7> Conclusion

[Speaker] Masayuki Sawada, Director of Sawada Masayuki Engineering Office [Lecture Topics] 1. The battle in Ukraine is the first large-scale drone war in history. 2. The battle in Iran also sees drones shifting the paradigm of strategy and tactics. 3. Efforts by major European countries (producing drones in Ukraine and collaborating with Ukrainian drone manufacturers). 4. Efforts by the United States (providing intercept drones and other support to Ukraine). 5. Efforts by Taiwan (producing drones in collaboration with U.S. manufacturers that have combat experience in Ukraine). 6. Efforts by Japan's Ministry of Defense (establishing a multi-layered coastal defense system using drones [SHIELD]). 7. Efforts by Japan's Terra Drone Corporation (collaborating with Ukrainian drone manufacturers). 8. Q&A / Business card exchange.