Notice of participation in the International Nanotechnology Exhibition and Conference nano tech 2022 from January 26 (Wednesday) to January 28 (Friday), 2022.

The Heelusher ultrasonic wire and tape cleaning device can continuously clean with over 1000 times the high-density ultrasound compared to ultrasonic bath cleaning.

When it comes to ultrasonic cleaning of wires, the product wire (bobbin) is immersed in a bathtub equipped with an ultrasonic cleaning machine filled with cleaning solution, and it is either left for a period of time or mechanically vibrated for cleaning. However, it is quite difficult to remove the lubricating oil and dirt that are stuck between the wires. The Heelscher wire cleaning device features a special sonotrode (resonator) of 400 mm with holes of appropriate diameter for the wire size, shaped like a cylinder, through which cleaning solution flows, allowing the wire or cable to pass through and run. Inside that cylinder, countless cavitations generated by powerful ultrasound occur, removing lubricating oil and dirt adhered to the surface of the wire or tape. These cavitations form a jet stream of 400 m/h in the small area within the cylindrical shape, stripping away unwanted residual lubricating oil and impurities from the surface of the wire flowing in the line. Compared to ultrasonic baths, the cavitation density in the solution is over 1000 times greater, allowing for efficient cleaning in a short time.

• Winding Machine
• Other processing machines
• Ultrasonic Cleaner

The powerful ultrasonic extraction technology is a new method for separating physiologically active compounds from plants using a high-amplitude, high-intensity Hielscher ultrasonic device.

Ultrasonic extraction is an effective new technology for isolating bioactive compounds from plants. However, ultrasonic extraction must be powerful to be successful, and Heelscher ultrasound generates high output and low frequency, producing intense cavitation. It moves energetically through the liquid in a slurry made of plant materials in the solvent, where extreme temperatures, pressures, heating/cooling rates, and pressure differentials create locally intense shock waves. When cavitation bubbles collapse on the surface of solids (particles, plant cells, tissues, etc.), micro-jets and partial collisions generate effects such as surface peeling, erosion, particle destruction, sonoporation (penetration of cell walls and membranes), and cell destruction. Until now, ultrasonic equipment could achieve localized processing in laboratories, but scaling up ultrasonic equipment for production was not possible. Heelscher ultrasonic equipment ensures high output (50,000W) and guarantees continuous operation for 24 hours. The erosion dispersion achieved through 100% cavitation by ultrasound allows for results that could not be achieved by shear force.

• Other processing machines
• Other powder equipment
• Homogenizer

Ultrasonic treatment of the liquid in the vial (epper tube) can be performed instantly with zero contamination. Up to 10 tubes can be processed simultaneously.

Ultrasonic treatment of liquids inside standard vials (such as Eppendorf tubes) is typically performed by immersing vials stored in a basket in the water of a general ultrasonic bath for an extended period. The ultrasonic equipment in the ultrasonic bath not only has low output and amplitude but also causes the ultrasound to attenuate as it passes through the medium of water, resulting in only minimal cavitation occurring inside the vials. The Heelscher ultrasonic equipment has developed a technology that allows for air operation, enabling vials to be inserted into a special holder that is vibrated intensely to generate strong cavitation inside. (This is almost an air operation.) This is the VialTweeter. Compared to ultrasonic baths, the VialTweeter can generate over 1000 times the cavitation inside the vials. Therefore, it can complete ultrasonic treatment of vials that would normally take time, almost instantaneously. <Applications> Cell lysis, dissolution, nanodispersion of aggregates, reduction of particle size, extraction, emulsification, Chemical reactions (sonochemistry) <Fields> Biology, nanomaterials, inks & pigments, chemicals, cosmetics, food & beverages.

• Separation device
• Emulsifier/Disperser
• Crusher

Obtained domestic explosion-proof type number for production ultrasonic equipment for use in explosion-proof areas. Capable of large processing from 2000W to a maximum of 8000W with one unit.

Heelscher Co. has made it possible to safely use Heelscher ultrasonic processing equipment in explosion-proof areas by obtaining the explosion-proof type approval number in Japan. The type certification is for ultrasonic outputs of <2000W>, <4000W>, <6000W>, and <8000W>, and it seems to be for complete production facilities. Heelscher ultrasonic equipment, which guarantees high output and continuous operation for 24 hours, achieves what was impossible with ultrasonic devices through 100% cavitation erosion dispersion, differing from the dispersion methods used by shear force-based shear homogenizers, ultra-high pressure homogenizers, and stirring bead mills. Moreover, even with the same ultrasonic technology, the results are entirely different from those of immersion-type ultrasonic cleaners. This is a technology made possible only by Heelscher's powerful ultrasonic equipment, which features high amplitude and high surface strength. <Applications> Nanodispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions <Fields> Nanomaterials, batteries, electronic materials, coatings, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

• Other processing machines
• Emulsifier/Disperser
• Homogenizer

Can operate continuously for 24 hours in the air (patented), and also capable of continuous operation in liquid for 24 hours. Disperses even strong primary particles with the power of powerful ultrasound, achieving nano-level emulsification.

Are you facing any of the following issues with nano-level dispersion and emulsification? Please feel free to consult us. • I want to use a powerful ultrasonic dispersion machine. • I want to achieve dispersion with minimal contamination. • I am considering scaling up from lab equipment. • I want to achieve even finer dispersion than now. This is a powerful ultrasonic processing device for dispersion, emulsification, and homogenization in liquids. It has zero heat generation, is compactly designed, and can operate continuously for 24 hours. Additionally, it can operate in air (patented), allowing for new applications in the atmosphere. For more details, please refer to the PDF materials or feel free to contact us.

• Emulsifier/Disperser
• Fine grinding machine
• Homogenizer

Circulation demo tests from 5L to 50L are possible. For production scale-up considerations, both in our lab room and at user sites with equipment rental!

Heilshar Corporation primarily designs and manufactures large and powerful ultrasonic equipment, offering lab equipment, prototype benchtops, and production-level devices. The results are completely different from those of immersion-type ultrasonic cleaners. It is the high amplitude and high surface strength of Heilshar's powerful ultrasound that enables this technology. Until now, Heilshar ultrasonic equipment, which guarantees high output (50,000W) and 24-hour continuous operation, achieves what was impossible with ultrasonic devices. Unlike shear mixers, ultra-high pressure homogenizers, and stirring bead mills that use shear force, it employs 100% cavitation through ultrasound for erosion dispersion, achieving results that shear force could not. <Applications> Nanodispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions (sonochemistry) <Sectors> Nanomaterials, paints, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

• Other processing machines
• Fine grinding machine
• Other powder equipment

While maintaining all the functions of the conventional UP400S, we have added more convenient features for research and development purposes as standard, significantly improving operability.

[Equipped with Touch Screen] All operations can be performed on the screen, allowing for intuitive control. Output, frequency, liquid temperature, and time can be checked immediately on one screen! [Wide Processing Range] Supports batch sizes from 5mL to 4000mL, and with the optional flow cell, processing of 10L to 50L/hour is also possible. Experimental data and parameters are fully linked with mass production machines, making it ideal for consideration of future implementation into actual machines (up to 16,000W).

• Homogenizer

Equipment capable of scaling up (5ml → 100ml → 1,000ml → 10l) with powerful ultrasonic devices equivalent to ultra-high pressure jet mills.

Heilshar Corporation primarily designs and manufactures large, powerful ultrasonic equipment, offering lab equipment, prototype benchtops, and production-level devices. Effective and energy-efficient technology is necessary to harness ultrasonic capabilities. Furthermore, even with ultrasonic technology, the results are entirely different from immersion-type ultrasonic cleaners. It is the high amplitude and high surface intensity of Heilshar's powerful ultrasound that enables this technology. Until now, Heilshar ultrasonic equipment has achieved high output (50,000W) and guarantees 24-hour continuous operation, differing from shear mixers, ultra-high-pressure homogenizers, and stirring bead mills that use shear force. Through 100% cavitation caused by ultrasound, it can achieve what was previously impossible with shear force alone. <Applications> Nano-dispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions (sonochemistry) <Sectors> Nanomaterials, paints, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

• Other processing machines
• Emulsifier/Disperser
• Fine grinding machine

A high-impact wave ultrasonic processing device with an amplitude of over 50 microns is significantly different from an ultrasonic cleaning machine. It guarantees continuous operation for 24 hours and also guarantees continuous operation in the air.

The Heelscher-made "Ultrasonic Treatment Device" guarantees continuous operation for 24 hours. By minimizing internal heat energy loss to nearly zero, there is no overheating of the equipment, which has been a weakness of ultrasonic devices. Internal air cooling is not required. Guaranteed continuous operation for 24 hours even for laboratory equipment. The industrial equipment model with 16,000W also guarantees continuous operation for 24 hours as a production model. It has a wide range of applications including nano-dispersion, re-agglomeration prevention, nano-emulsification, cell disruption, and extraction. It is utilized in numerous fields such as chemistry, electronic materials, pharmaceuticals, cosmetics, food, and biotechnology. 【Features】 ■ Overwhelming output of up to 16,000W (for standalone equipment) ■ Capable of continuous operation in the air (patented) ■ Guarantees continuous operation for 24 hours *For more details about the product, please refer to the "catalog." Feel free to inquire about "demo tests" as well!

• Other processing machines
• Emulsifier/Disperser
• Fine grinding machine

It is possible to improve the penetration of dyes into the fibers and pores of textiles, significantly increasing color intensity and vibrancy! Low-temperature processing and fast dyeing speed too!

<Ultrasonic Effects During Dyeing> Even with the same ultrasound, the results are completely different from those of immersion-type ultrasonic cleaners. At amplitudes below 1μm, no effects can be expected from ultrasound. It is only with high amplitudes of over 50μm and high surface intensity of over 20W/cm² that the powerful ultrasonic technology of Heelusher can achieve these results. Wet & Batch Dyeing: Ultrasonic cavitation and microstreaming can enhance the penetration of dyes into the fibers and yarn pores of materials. Ultrasonic cavitation accelerates the diffusion rate of pigments inside the fibers by perforating the outer layer of the fibers, allowing the dye to enter the fiber pores. At the same time, ultrasonic treatment can speed up the chemical reactions between the dye and the fibers.

• Textile Processing Machinery
• Other processing machines

This is a device that improves the hydrophilicity of hydrophobic substances (powders) like carbon particles by applying a strong electric field with a constant voltage for a certain period of time.

Ion Hydrophilization Device Rich Ion Hydolofilitor Inside the device, there is a chamber insulated from the outside, where the target powder is placed in a bag and allowed to sit. A strong electric field is created only within this chamber. The target powder is subjected to a static treatment in the chamber with the strong electric field for 24 hours. The strong electric field passes through the bag and causes a distortion in the molecular electronic arrangement of the target powder inside. By continuing this phenomenon for a certain period, a slight distortion can be induced in the molecular structure of the entire substance. This distortion makes it easier for the target powder to interact with water molecules and liquid molecules. Since the changes occur at the molecular level, hydrophilicity can be enhanced without altering the physical properties.

• Other processing machines
• stainless
• Organic Natural Materials

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

When conducting structural analysis of organic compounds, IR, NMR, and MS can be considered the three sacred treasures. If the analysis is performed correctly, it is possible to elucidate the structure of even quite complex compounds. However, actual spectra are often not of a single compound, as seen in textbooks, which can lead to significant challenges in interpreting results for beginners in analysis. Additionally, while database searches are a useful tool in structural analysis, the ability to read spectra is necessary to select the correct structure from among the candidates, not just pattern matching. In this course, we will lecture on the basic ways to interpret IR, NMR, and MS spectra, including simple explanations of principles, points to be aware of during analysis, and how to proceed with actual analysis, incorporating some exercises as well.

◆Mechatrotech Japan 2025 —◆ Troax Safety Systems Co., Ltd. will be exhibiting at "Mechatrotech Japan 2025." ■ When it comes to steel safety fences, think "TROAX" - We will showcase steel safety fences used around robots, equipment, and conveyor lines. ■ The safety guard "FlexGuard" absorbs impact with flexible materials and boasts excellent durability - This safety guard ensures the safety of workers in environments where people and "machines/vehicles" interact, such as manufacturing sites, truck areas, and packing areas. At our booth, our staff will be available to answer various questions and address challenges related to products and safety measures on-site. We sincerely look forward to your visit.

Luminex Japan Co., Ltd. will exhibit at the 33rd Annual Meeting of the Japanese Society for Organ Transplantation, held at Nagasaki University from October 3 (Friday) to October 5 (Sunday). Please feel free to consult us at our booth regarding any questions about Luminex systems. We would also love to hear your feedback and requests!

[Speaker] Yuri Ishii, Deputy Director, Environmental Economics Division, Minister's Secretariat, Ministry of the Environment [Key Lecture Content] This guide has been created with the intention of assisting companies in responding to the increasing demands for disclosure in various environmental fields, such as climate change and natural capital, and was published in June of the 7th year of Reiwa. The "integrated approach" introduced in this guide suggests that companies should not respond individually to the disclosure requirements in each environmental field, but rather engage with an awareness of their interconnections. Through this initiative, we aim to improve business processes under management involvement, effectively and efficiently address various environmental issues, and facilitate disclosure. The key points of the guide will be explained. [Lecture Items] 1. Expansion of environmental issues to be addressed 2. Significance of integrated initiatives and disclosure 3. Trends in sustainability-related information disclosure 4. Methods and benefits of integrated initiatives and disclosure; case studies of companies 5. Utilization of environmental due diligence for information disclosure 6. Q&A / Business card exchange