【Cooling possible up to 12K】Flat plate for powder X-ray diffraction PheniX【Temperature stability 0.1K】

Flat plate for powder X-ray diffraction that can be cooled down to 12K!

The PheniX from Oxford Cryosystems is a unique closed-cycle helium cryostat specially designed for powder diffraction at very low temperatures. PheniX is designed to be mounted on a vertical goniometer and comes with mounting plates for various powder systems. 【Key Features】 ■ Minimum cooling temperature of 12K without liquid refrigerants ■ Excellent temperature stability of 0.1K ■ Fast cooling times: 20K in 45 minutes, 12K in 60 minutes ■ Quick sample exchange with only 40 minutes of warm-up time *For more details, please download the PDF or feel free to contact us.

• Other physicochemical equipment

Cooling and heating chamber for X-ray diffraction of powder samples.

The Chimera from Oxford Cryosystems is a high-performance temperature-variable chamber for powder X-ray diffraction, with a temperature range of 70K to 525K and a temperature stability of 0.1K. Unlike conventional cooling and heating chambers, the Chimera uses a single-stage GM cryocooler from Oxford Cryosystems, eliminating the need for liquid nitrogen. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Spray low-temperature device optimized for capillary samples!

The Cryostream Compact from Oxford Cryosystems is a compact version of the Cryostream 800 series spray cooling device, optimized for cooling powder samples in capillaries. The use of a short nozzle allows for coaxial alignment of the nozzle and capillary, reducing the risk of ice formation. It cools down to 80K using liquid nitrogen. The consumption of liquid nitrogen is low, and it requires very little maintenance. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

A spray low-temperature device for X-ray diffraction that can cool down to 170K using dry air! Ideal for cooling small molecules!

The Smartstream from Oxford Cryosystems is a spray cooling device that can cool down to 170K (-103°C) using dry air instead of liquid nitrogen or nitrogen gas. It requires very little maintenance and is the ideal solution for cooling small molecule crystals. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

A spray-type low-temperature device for X-ray diffraction that can cool down to 80K with liquid nitrogen! Low liquid nitrogen consumption and high maintainability!

The Cryostream 800 series from Oxford Cryosystems is a liquid nitrogen type spray cooling device capable of cooling down to 80K. It is the fourth generation of the Cryostream series from Oxford Cryosystems, following the 500, 600, and 700 models. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Non-liquid nitrogen, nitrogen gas type X-ray diffraction spray low-temperature device!

Cobra is a spray cooling device that uses nitrogen gas instead of liquid nitrogen. It frees you from issues related to the storage, transportation, and safety of liquid nitrogen, as well as concerns about forgetting to refill the Dewar. Cobra can operate continuously for weeks or months without user intervention. Like the liquid nitrogen type Cryostream, it can cool down to 80K with a stability of 0.1K. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Dual-type X-ray diffraction spray cryostat for helium gas and nitrogen gas!

The N-Helix from Oxford Cryosystems is a spray cryogenic device that can cool down to 28K using helium gas without the need for liquid helium. It is designed to operate economically with minimal gas consumption, allowing for approximately 16 to 20 hours of operation with a standard helium gas cylinder. By connecting multiple cylinders using a manifold, long-duration experiments are possible. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.