Visualizing infrared light from 700 to 1700nm! Infrared Position Detection Board - Perfect for adjusting the optical axis of infrared sensors!

Visualizing infrared light from 700 to 1700 nm using "electronic trapping"!!!

The infrared position detection board is a sensor printed with crosshairs and circular sighting lines on a 3mm thick polycarbonate substrate. It emits visible light from the areas where infrared is irradiated, making it ideal for adjusting the optical axis of infrared. There are versions available in reflective (R) and transmissive (T). They can be secured to various fixtures using clamps, drilling, bolting, or other methods for installation on different equipment. Both versions have measurement lines marked in 2mm increments.

• Other inspection equipment and devices

Visualization of infrared light from 700 to 1700 nm through electronic trapping!!!

The IR sensor card (infrared sensor card) is laminated and is the most common product in the IR sensor series. It emits visible light from the area where infrared is irradiated. The letter R (reflective) at the end of the model number indicates that the IR beam image is displayed only on the front side of the card (the irradiated side). The letter T (transmissive or translucent) at the end of the model number indicates that the IR beam image is displayed on both sides of the card. At the same infrared intensity, the R type card provides a clearer image due to the backing of reflected light. The phosphor layer is laminated between transparent plastics suitable for various near-infrared detection and imaging applications.

• Other inspection equipment and devices

Visualizing infrared light from 700 to 1700 nm through "electronic trapping"!!!

The IR sensor seal (infrared sensor seal) is a thin, flexible sheet-type sensor. It emits visible light from the area where infrared light is irradiated. It can be cut into any shape and used by peeling off the backing to stick it in various locations. The phosphor is coated with adhesive on transparent Mylar. This sensor seal is not laminated. By attaching the sensor seal to reflective materials, it becomes a reflective sensor, allowing confirmation of light emission from the irradiated surface. When attached to transparent materials, it acts as a transmissive sensor, enabling light emission to be confirmed from both sides.

• Other inspection equipment and devices

Visualizing ultraviolet light from 250nm to 500nm!!!

The UV sensor card (ultraviolet sensor card) is laminated and is the most common product in the UV sensor series. It emits visible light from the areas exposed to ultraviolet radiation. The letter R (reflective) at the end of the model number indicates that the UV beam image is displayed only on the front side of the card (the irradiated side). The letter T (transmissive or translucent) at the end of the model number indicates that the UV beam image is displayed on both sides of the card. At the same ultraviolet intensity, the R-type card provides a clearer image due to the backing of reflected light. The surface is not laminated to prevent the blocking of ultraviolet rays.

• Other inspection equipment and devices

Visualizing ultraviolet light from 250nm to 500nm!!!

The UV sensor seal (ultraviolet sensor seal) is a thin, flexible sheet-type sensor. It emits visible light from the area exposed to ultraviolet radiation. It can be cut into any shape and used by peeling off the backing to stick it in various locations. The phosphor is coated with adhesive on a transparent Mylar. This sensor seal is not laminated. By adhering the sensor seal to reflective materials, it becomes a reflective-type sensor, allowing you to confirm the emission from the irradiated surface. When attached to transparent materials, it acts as a transmissive-type sensor, enabling confirmation of emission from both sides.

• Other inspection equipment and devices

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The delivery time for the following models is currently about 4 weeks. - Standard specification model with full scale from 2 mL/min to 500 L/min (M/MB/MC series) - Low pressure loss model with full scale from 2 mL/min to 100 L/min (MW/MWB/MCW series) *Delivery times may vary depending on the type of options, so please inquire. *The delivery time for the controller may vary depending on pressure conditions, so please inquire. The delivery time for other models is approximately 2 to 3 months. For more details, please request a quote or consultation.

Grabee is a next-generation monitoring solution equipped with new features specialized for forest fire and wildlife damage prevention, based on AI video analysis and location estimation technology developed at Guardian. In addition to the conventional location estimation function, it now includes flame identification and animal identification capabilities, enabling early detection and response to forest fires and wildlife damage. Furthermore, it supports mapping of fire areas and area calculations.