The glare evaluation technology for displays was featured in the February 2022 issue of the monthly magazine Materu Aru Stage.

We will accurately quantify the reflection on the display.

- The display's anti-glare properties can be quantified accurately and easily. - Quality control of displays and components can be performed efficiently. - New insights in the research and development of displays and components can be obtained quickly.

• Optical Measuring Instruments

Easily and accurately quantify glare. You can check the measurement process and operation methods from your PC.

We offer the optical characteristic evaluation system 'SMS-1000' that measures "glare (light scattering)" caused by the brightness differences of elements (pixels) within a display. It is compatible with displays including LCD and organic EL, and allows for the measurement and quantification of four parameters: "glare," "sharpness," "anti-glare (reflection distribution)," and "transmission characteristics" with simple operations. Currently, we are conducting an online measurement demo where you can check the measurement process and operation on the web. If you are interested, please apply through the <Contact Us> section. 【The online measurement demo is recommended for the following individuals】 ◎ It is difficult to visit the demo room. ◎ I would like to check the usability of the equipment. ◎ I would like to confirm the evaluation results. (Measurement demos using samples you send can also be accommodated.) *For more details about the product, you can view the PDF download. Please feel free to contact us.

• Other measurement, recording and measuring instruments

Creating a future where people shine and transforming society and the world through displays.

Aphrodite Co., Ltd. was established in November 2013 and started its business with optical measurement equipment for displays. Leveraging years of practical experience, we provide various consultations, advice, and support related to displays. We can accommodate flexible durations, whether short-term or long-term. 【Business Activities】 ■ Planning, development, and sales of solutions for electronic information devices ■ Maintenance and sales of electronic measurement equipment ■ Consulting services related to the above items *For more details, please refer to the PDF document or feel free to contact us.

• LCD display

Developing an innovative measurement system that allows for quantitative measurements to be performed inexpensively and with easier operation.

This document includes information about the equipment used to measure the "glare" generated by displays with pixels of varying brightness, handled by Aphrodite Corporation. To quantitatively measure the four parameters of "glare," "resolution," "reflection characteristics," and "transmission characteristics," we have developed an innovative measurement system. We introduce the causes of glare, its definition, and measurement methods, along with graphs and other illustrations. [Contents (excerpt)] ■ Causes of glare ■ What is glare ■ Glare evaluation system specifically for displays ■ Overview of SMS-1000 ■ Hardware specifications of SMS-1000 *For more details, please refer to the PDF document or feel free to contact us.

• Optical Measuring Instruments

Technical data presentation in progress! For display development and quality assurance. Easily quantify glare with high precision.

The "SMS-1000" is an evaluation system that measures "glare (light scattering)" caused by differences in brightness of the elements (pixels) within a display. It is compatible with displays including LCD and organic EL, and can measure and quantify four parameters: "glare," "resolution," "reflection characteristics," and "transmission characteristics" with simple operation. ★ Starting December 4, we will be exhibiting at Fine Tech Japan! During the event, you can try sample measurements with the SMS-1000. (Reservation required) For more details, please contact us. 【Features】 ■ Total quantitative evaluation of displays and anti-glare surfaces is possible ■ Evaluation compliant with JIS standards is possible ■ Even small glare can be measured with high accuracy ■ Composed of a camera with optical lens *Technical materials can be viewed via "PDF Download." It introduces the causes of glare, definitions, and measurement methods with graphs and other illustrations.

• Optical Measuring Instruments

To achieve a beautiful display

- Overview Sharpness is one of the indicators that represent the clarity of an image. Essentially, it deals with "blurriness," and being sharp indicates that there is little "blurriness." While resolution indicates the limit at which blurriness becomes invisible, sharpness differs significantly from resolution in how it expresses the degree of "blurriness" or how "blurriness" progresses. Resolution is a subjective evaluation, whereas sharpness is an objective evaluation. The evaluation method for the SMS-1000 uses the MTF (Modulation Transfer Function) and employs the contrast method for MTF measurement. - Trend The trend towards higher resolution and higher quality displays will remain unchanged in the future. Characteristics that satisfy both evolutions are being sought. - Effect Simple measurements will provide insights into display characteristics and serve as effective guidelines for development. *If you would like technical materials, please download the PDF from the link below.

• Optical Measuring Instruments

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.