Notice of participation in 'ThermoTech 2022' from June 1 (Wednesday) to June 3 (Friday), 2022.

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Temperature and humidity measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -75 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only for 973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ TFT display option available* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter installed in TKZH002 uses a polymer sensor utilizing thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter for high humidity and harsh environments. It is a high-performance, high-response moisture meter with minimal aging changes. Since it provides continuous online measurements, it alerts you to moisture levels and the timing for oil replacement before water contamination affects insulation performance.

• Other electronic measuring instruments

For oil deterioration diagnosis! Displays moisture activity value (aw), oil temperature (°C), and moisture content (ppm). A multifunctional handheld measuring device, Techneport Oil.

● Measurement of water activity value (aw) and oil temperature (°C) to calculate water content (ppm) ● TFT touchscreen ● 10 types of oil parameter settings available ● Data logging function (approximately 2 million points) ● One-point or two-point calibration using a simple calibration kit (optional) ■ TEKHNEport-Oil measures the water activity value (aw) and oil temperature (°C) in oil, allowing for the calculation of water content (ppm). It can store parameters for 10 different types of oil needed for conversion, enabling the management of multiple types of oil with a single unit. Using these parameters, more accurate measurements of water in oil can be achieved. Measuring water content in oil is useful for diagnosing oil contamination and degradation, ensuring that the timing for oil replacement is not overlooked.

• Analytical Equipment and Devices

Dew point measurement unit with built-in sampling equipment!

■ Ideal for spot checks ■ Simple operability ■ Choose a dew point meter based on application TK: Built-in TK-100 dew point meter for low dew points TE: Built-in TE-660 dew point meter for medium dew points ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is a portable all-in-one dew point meter equipped with a dew point meter and necessary sampling equipment. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 manufactured by Techne Measurement Co., Ltd., known for its expertise in furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

• Other electronic measuring instruments

Low-cost model for OEM oxygen concentration measurement in ppm/%!

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor that is resistant to combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer for PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement of the sensor from the front panel. For more details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

Measurement control panel for various measurements in atmospheric gas!

When measuring the dew point and oxygen concentration in the atmosphere gas inside the furnace, the gas is sampled with a pump, impurities are removed with a filter, and then measurements are taken.

• Other measurement, recording and measuring instruments

[Speaker] Ministry of Land, Infrastructure, Transport and Tourism, Road Bureau, Planning Division, Road Economic Research Office Planning Specialist Yuki Endo [Key Lecture Content] The Ministry of Land, Infrastructure, Transport and Tourism is advancing discussions on the realization of automated logistics roads as a new form of logistics in response to recommendations from the "Interim Summary on the State of High-Standard Road Networks," addressing logistics crises and carbon neutrality. This lecture will introduce the final summary on the state of automated logistics roads published in July of the 7th year of Reiwa, as well as the demonstration experiments planned for the 7th year of Reiwa. [Lecture Items] 1. Final summary on automated logistics roads 2. Demonstration experiments for the 7th year of Reiwa 3. Q&A / Business card exchange

[Speaker] NTT Docomo Business Inc. 5G & IoT Services Department Director in charge of Global Connected Cars, Yuji Tamai [Key Lecture Content] The value of SDV lies in continuously cycling 'updates × data × cloud', and connectivity is a prerequisite for this. In this presentation, we will organize the barriers of quality, cost, and regulation faced in global expansion, and explain the design principles and operational models from roaming enhancement, eSIM/RSP (SGP.32), integrated management (CMP), NTN, to Network API. Additionally, we will delve into security aspects related to connectivity, introducing phenomena observed in actual service operations and their countermeasures, as well as exploring other operational updates (staged delivery, avoiding simultaneous activation, monitoring/observability). [Lecture Items] 1. Positioning of connectivity in SDV 2. Barriers to global connectivity 3. Designing to "strengthen" roaming 4. eSIM/RSP and SGP.32 5. Integrated connectivity management (CMP) and operations 6. Further connectivity - NTN and Network API 7. Security and update operations 8. Q&A

"Even though I'm communicating, nothing changes." "When I give a warning, the atmosphere gets worse." — Are you trying to solve these problems just by changing how you interact? What you need is not to move people, but to create a workplace that is easy to navigate. I will explain based on numerous examples of on-site improvements that I have supported. Held on May 27 (Wednesday). Please check the LP for more details. ▼ For more information and registration (free), see below.

At the Dry Fog Humidification System Free Demo Experience, you will have the opportunity to actually experience our Dry Fog, as well as our single-fluid and dual-fluid humidifiers. We will explain the differences from conventional humidifiers and the effects of implementation. In addition to introducing the latest case studies, we will also provide time for you to consult directly with our specialized staff. Please select a convenient venue and date from the application page and apply. * The "morning session" and "afternoon session" contain the same content. Please participate at a time that suits you. * This event is intended for users only. Participation from trading companies, other companies in the same industry, or for sales purposes to our company is not permitted. Venues: ■ Yamagata Venue: 3/12 (Wed) at Yamagata International Exchange Plaza 3/13 (Thu) at Sakata Chamber of Commerce and Industry ■ Sendai Venue: 3/14 (Fri) at Kiri no Ikeuchi Sendai Branch ■ Tokyo Venue & Osaka Venue: 3/18 (Tue), 3/19 (Wed), 3/21 (Fri) at Kiri no Ikeuchi Tokyo Sales Office & Kiri no Ikeuchi Osaka Headquarters ■ Nagoya Venue & Fukuoka Venue: 4/9 (Wed), 4/10 (Thu), 4/11 (Fri) at Kiri no Ikeuchi Nagoya Sales Office & Kiri no Ikeuchi Fukuoka Sales Office

In recent years, as many companies are considering modernization, exploring methods for system renewal has become an important issue. This seminar will focus on "Rewrite," one of the solutions to such challenges, and will explain questions and issues encountered during project promotion in a Q&A format. <Program> - Opening - How to advance system renewal through "Rewrite" and key points for problem-solving - Introduction of unique tools to support migration <Recommended for> - Those who are struggling with specific methods for system renewal - Those who are concerned about the continuity of maintenance for existing systems and a shortage of personnel - Companies that own IBM i (AS/400) *We may refuse applications from competing companies or those not eligible to participate.