SmartSensing2022

Achieving a compact and lightweight design with a palm-sized form factor weighing only 15g! A near-infrared spectrometer with a built-in long-lasting light source of 40,000 hours.

- Use of MEMS-type Fabry-Perot wavelength variable filter technology - A lineup of sensors compatible with the near-infrared wavelength range - Achieves miniaturization, high sensitivity, and cost reduction compared to conventional spectrometers - Approximately three times higher sensitivity compared to cooled linear array types - Built-in light source with a long lifespan of 40,000 hours

• Other optical parts
• Analytical Equipment and Devices
• Other environmental analysis equipment

A digital nano spectrometer that covers a wide range from UV to near-infrared (340 to 1010 nm) in an ultra-small size.

This is a super compact spectral sensor based on innovative digital nano-convergence technology. ■ Capable of spectral measurement across a wide wavelength range of ultraviolet, visible, and near-infrared. (N1: 600–1,000 nm / V1: 390–760 nm / W1: 340–1,010 nm) ■ Ultra-compact size The spectral sensor module measures only 6mm x 6mm x 5.3mm. ■ Mass production is possible Due to its excellent mass production capabilities and ultra-compact size, it is suitable for applications in the mass market that require integration into devices, as well as for mobile/wearable devices and IoT.

• Other optical parts
• Analytical Equipment and Devices
• Other environmental analysis equipment

Multi-point measurement capable FBG sensor

This product consists of an interrogator that performs light emission and reception for sensing, and an FBG fiber that has been processed with a Fiber Bragg Grating (FBG). ■ Interrogator A compact and lightweight interrogator equipped with the components necessary for the analysis of Fiber Bragg Grating (FBG). ■ FBG Sensor Chain The FBG sensor chain is an optical fiber cable processed with Fiber Bragg Grating (FBG), allowing for flexible customization. The cable length can be up to 500m, and measurement points can be freely set, with a minimum interval of 1mm. It can also be used in combination with your currently used interrogator.

• Other measurement, recording and measuring instruments

Detects impurity gases in hydrogen with high sensitivity. A single module can detect up to four types of gases.

This is a detection module for gas analyzers that combines a Quantum Cascade Laser (QCL) and a photoacoustic cell. It can accommodate up to four QCLs, allowing for the detection and monitoring of four different gases. Based on the proprietary manufacturing technology of mirSense, it utilizes the technologies of Quantum Cascade Laser (QCL) and Photoacoustic Spectroscopy (PAS), enabling the trace detection and monitoring of up to four types of gases. It minimizes interference from coexisting gases, achieving the detection of low-concentration gases (sub-ppm). This product is optimized for applications measuring and monitoring impurities such as CO, CO2, NH3, and CHOH in H2. - Target gases: CO, CO2, NH3, CHOH

• Analytical Equipment and Devices

Optimal for air quality monitoring and greenhouse gas emission monitoring. Detects low concentration gases with high sensitivity. Capable of detecting multiple gases with a single module.

This is an OEM detection module for gas analyzers that combines a Quantum Cascade Laser (QCL) with an optoacoustic cell. It is capable of detecting and monitoring multiple gases with a single module. It is suitable for air quality monitoring applications in various industrial fields, such as detecting gases from plant emissions, which are considered causes of global warming and air pollution, and from livestock emissions. - Target gases: NH3, CO, CO2, NO, NO2

• Analytical Equipment and Devices

For quality control of natural gas and biogas, and for moisture monitoring.

MultiSense-H2O, through the unique manufacturing technology of mirSense, which combines "Quantum Cascade Laser (QCL)" and "Photoacoustic Spectroscopy (PAS)," enables real-time measurement of low concentrations (sub-ppm) of moisture. It is ideal for applications requiring moisture concentration management and monitoring, such as quality control of biomethane and natural gas, moisture concentration management in biogas purification processes, and corrosion prevention in pipelines. Equipped with a high-performance microphone, it has a wide dynamic range and can detect moisture concentrations from low to high levels.

• Analytical Equipment and Devices

For the miniaturization of gas measurement devices! 【Compact module with built-in IR light source】

The small module from Awite Bioenergie is a compact gas sensor module using NDIR (non-dispersive infrared absorption) technology, equipped with an integrated IR light source, capable of measuring gases such as methane (CH4), carbon dioxide (CO2), and carbon monoxide (CO). ■ Integrated IR light source. Ideal for compact and lightweight gas measurement devices - Dimensions: 160x100x30mm - Weight: 170g - Long-life integrated IR light source ■ Measurable gases CH4 CO2 CO Other gases (please inquire). Demo units are also available. Please contact us.

• Other optical parts
• Analytical Equipment and Devices
• Other environmental analysis equipment

It is a microphone that uses optical fiber technology and does not use electrical signals, allowing it to capture sound without being affected by electromagnetic waves or interference.

As a new value of the optical fiber acoustic sensor developed for detecting abnormal sounds in harsh environments, this product is specialized for capturing voice. - The microphone part is made of plastic and does not use electrical signals, so it is not affected by electromagnetic waves. - The microphone is undetectable by detection devices (cannot be found). - Equipped with VOX and Time trigger (recording timing can be programmed). - The microphone can be installed up to 10 km away from the unit. - The microphone (sensor) unit is compact and lightweight (2g). - The microphone's terminal is made of telecom fiber, allowing the use of existing fiber networks.

• Other measurement, recording and measuring instruments

Acoustic sensors that can be used in harsh environments such as high temperature, high pressure, high humidity, high magnetic fields, and radiation environments.

The Myotis 1300 from Phonoptics is a fiber optic acoustic sensor that can be used in environments with high temperatures, high pressure, high humidity, electromagnetic interference (EMI/RFI), strong magnetic fields, and radiation. ■ Usable in Harsh Environments It can be used in environments with high temperatures, high pressure, high humidity, electromagnetic interference (EMI/RFI), strong magnetic fields, and radiation. ■ The Sensor is Compact and Easy to Install By using a telephone communication network (single-mode fiber and graded-index multimode fiber types), the microphone can be connected to the existing optical network. ■ Product Configuration of Myotis 1300 - Acoustic Sensor - Converter - Power Cable

• Other measurement, recording and measuring instruments

Acoustic sensors that can be used in harsh environments such as high temperature, high pressure, high humidity, high magnetic fields, and radiation environments.

The Myotis 1400ht from Phonoptics is a fiber optic acoustic sensor designed to withstand harsh environments such as high temperatures, high pressures, high humidity, electromagnetic interference (EMI/RFI), strong magnetic fields, and radiation. It is capable of collecting sound in locations where other microphones cannot operate. ■ Utilizes patented sensor technology and fiber optics With MM50 fiber, microphones can be used up to 10 km from the converter, and with SM fiber, even further distances are possible. ■ The sensor is compact and easy to install Output options include BNC output, 3.5mm audio jack, and USB. ■ Myotis 1400ht product configuration - Acoustic sensor - Converter - Power cable

• Other measurement, recording and measuring instruments

A compact and low-cost converter suitable for embedding in optical fiber sensors.

μMyotis is a compact converter that can be used with various sensors provided by Phonoptics, including acoustic sensors, dynamic pressure sensors Alpheus, vibration sensors, and tachometers (rotational speed meters). μMyotis features a built-in light source, photodiode, and microcontroller, making it ideal for integration into devices due to its smaller size compared to conventional products. ■ Compact size suitable for integration into devices ■ Built-in light source, photodiode, and microcontroller ■ Compatible with various sensors from Phonoptics, including acoustic sensors, dynamic pressure sensors, vibration sensors, and tachometers ■ Customizable PCB ■ Capable of connecting to IoT (Bluetooth, GPS, LORA/SIGFOX module, Ethernet, CAN, GSM, etc.) It can also be used in combination with the Phonoptics Breakout (sold separately). *For details on Breakout products, please contact us.

• Other measurement, recording and measuring instruments

Cost-effective converter for optical fiber sensors.

Mini Myotis is a cost-effective converter that can be used with Phonopitcs' optical fiber sensors (acoustic (microphone), dynamic pressure, vibration, tachometer (rotational speed meter), etc.) that are operable in harsh environments such as high temperatures and high magnetic fields. - Built-in SLED light source, photodiode, and microcontroller - Compatible with various sensors from Phonoptics (acoustic sensors, dynamic pressure sensors, vibration sensors, tachometers, etc.) - Enhanced stability through heat sink housing - Supports various outputs including BNC output

• Other measurement, recording and measuring instruments

Can be used in harsh environments such as high temperatures and high frequencies. Dynamic pressure wave measurement of turbochargers.

The Alpheus100 from Phonoptics is a dynamic pressure sensor that can be used in harsh environments such as high temperatures and high frequencies. ■ Compact: Sensor dimensions: Diameter Φ3.2mm, Φ2.5mm (※Φ1.25mm in development) ■ Lightweight: 0.5g (sensor head) Due to its fiber design and small diameter, it can also be used for pressure measurement inside pipes. ■ Excellent explosion-proof properties The sensing part uses only glass and fiber, providing excellent explosion-proof characteristics. ■ Accurate measurement in harsh environments. - RF/EMI-free, no electromagnetic interference - Calibrated for better response speed and sensitivity than piezo sensors, allowing for more accurate measurements. ■ Frequency range: 40kHz, 100kHz (other specifications available upon request) ■ Operating temperature: up to 600℃ (※ up to 1000℃ in development) ■ Capable of detecting vibrations in liquids.

• Other measurement, recording and measuring instruments

Acoustic sensors that can be used in high temperature, high pressure, high humidity, high magnetic field, and radiation environments.

Phonoptics' microphones are designed to quietly capture sound without being noticed at all. ■ Acoustic sensors developed as products resistant to electromagnetic interference They are made of plastic and glass, do not use electricity at all, and have no metal parts. They operate solely on light. ■ Usable at distances of over 10 km (6 miles) without using a relay Based on patented sensor technology using a single optical fiber, it is possible to use the microphone at distances of over 10 km (6 miles) from the electronic device without using a relay. ■ Compact and easy to install The sensors are compact and can be easily installed. By using the telephone communication network, the microphone can be connected to existing optical networks.

• Other measurement, recording and measuring instruments

A non-contact thermometer that can consider the effects of changes in both emissivity and reflectivity at temperatures between 500 and 1500°C.

The Thermoref pyrometer from Phonoptics is a non-contact thermometer that can take into account the effects of changes in both emissivity and reflectivity. - Measurement temperature range: 500 to 1500℃ - Fiber optic length: Standard 2 m - W.D. (Working Distance): 400 mm - Spot size: 5 mm @typ.400mm (Other specifications available upon request. Please contact us.) - Reliable temperature measurement In addition to measuring the radiative temperature from the object like a conventional pyrometer (radiation thermometer), it calculates the emissivity and compensates for its variations. This enables highly reliable temperature measurements. - Ideal for temperature measurement in materials research It is perfect for temperature measurement in materials research and the development of new materials in industrial fields such as steel, ceramics, cement, aerospace electronics, and nuclear power. - User interface In addition to operation via a touch panel, operation via PC software is also possible.

• Thermometer

For temperature monitoring of transformers, reliable temperature monitoring is possible without being affected by noise from EMI/RFI and high voltage environments.

OSENSA's fiber optic temperature sensor for transformers enables real-time temperature monitoring of transformers without being affected by noise in environments with EMI/RFI or high voltage. The basic configuration of this product consists of a temperature sensor probe, a transmitter, and software. The probe PRB-230 is designed for temperature measurement in oil-filled transformers and accommodates immersion and removal processes for various types of transformer oil. The transmitter is available in a type that can connect multiple probes with a single unit, allowing for simultaneous measurement of temperatures at multiple points.

• Thermometer

It is possible to perform accurate and highly reliable temperature measurements for research purposes in the fields of electricity and medicine.

Made of high-quality fiberglass, it achieves an extremely fast response time while being able to withstand temperatures up to 350°C.

• Other temperature and humidity measuring instruments

By linking with a mobile app, it is possible to easily determine materials anytime and anywhere with simple steps.

IndiGo is a compact spectrometer that can determine materials through simple procedures in conjunction with a mobile app. It is ideal for checking materials upon arrival, such as industrial materials, fabrics, oil/gas, and chemical products, as well as for quality checks before shipment. <Material Determination Procedure> 1. Measure the spectrum of the reference material and register it in the database. 2. Measure the spectrum of the target material. 3. Compare the measured spectrum with the reference spectrum and output the measurement results for the target material. ■Product Features - Bluetooth - Low cost - Compact and portable - Easy measurement - Software suitable for material determination

• Other measurement, recording and measuring instruments

Ultra-compact. Easy color measurement, data storage, and sharing with a smartphone app. A comprehensive color library.

The Variable Spectro1<TM> is a palm-sized, ultra-compact spectrophotometer compatible with smartphones. ■ Bluetooth compatible ■ Extensive color library ■ Lab display capable ■ Unique colors can be registered as references for comparison with measurement samples ■ Calculations possible under four different light source conditions (A, F2, D50, D65) ■ Cloud database management Data can be backed up to the Variable Cloud color management system ■ Compact spectrophotometer in palm size Outer diameter Φ31 × length 78.35mm

• Other measurement, recording and measuring instruments

When attached to a smartphone with a camera, it becomes a compact spectrometer! It can be attached to most smartphones and tablets!

Go Spectro is a super compact spectrometer that can be attached to a smartphone with a camera, allowing for easy spectral video measurement. 1 Measurement - Point GoSpectro at the target object and start measuring - Observe the spectrum live - Press the SAVE button to save the spectral information 2 Data Transfer - Send data to the cloud via Email - Save data to a computer via USB 3 Analysis - Perform peak value, reference value, and background correction - Compare the spectrum with the database ■Features - Compatible with most smartphones and tablets - Dedicated mobile application (Android and iOS) - Spectral video measurement - Automatic calibration

• Other measurement, recording and measuring instruments

A photodiode with very high sensitivity over a wide wavelength range from 200nm to 950nm.

ElFys' black silicon photodiode is a photodiode that enhances light collection through surface nanostructure technology combined with atomic layer deposition (ALD) coating, allowing for high sensitivity in detecting light over a wide wavelength range. It has an external quantum efficiency of over 96% in the wavelength range of 200nm to 950nm. Particularly in the ultraviolet (UV) region, it exhibits very high sensitivity, with approximately twice the optical responsiveness compared to conventional pn junction photodiodes.

• Other optical parts

Ultra-high sensitivity SMD package suitable for wearable devices - Black silicon photodiode

The ElFys SM series is a black silicon photodiode in an SMD package that excels in visible and near-infrared light detection performance. ■ Ultra High Sensitivity With ultra high sensitivity, it outputs more photocurrent, improving the energy efficiency of PPG (photoplethysmography) modules. ■ SMD Compact Package The "compact package" and "high light-receiving area fill factor" enable the design of innovative wearable products. It is particularly suitable for health monitoring applications in wearable devices.

• Other optical parts

We will be exhibiting at the "1st [Nagoya] High-Performance Plastics Exhibition -PLASTIC JAPAN-" held at Port Messe Nagoya. We will introduce samples and characteristics of our carbon nanofibers blended with various resins. The conductive carbon nanofiber (high dispersion) ALP-NK1 (550W/mK) has also been added to our product lineup, and we will propose materials tailored to customer needs, starting with heat dissipation applications. Additionally, we will showcase extruded round bars of PEEK blended with carbon nanofibers and their processed products, as well as doctor blades designed for battery materials. As a business model for our nanomaterial business, we offer sales of CNF powder and prototype sales of resin blends (pellets and liquid resins) according to customer requests. Furthermore, we will introduce various silicon materials, including silicon monoxide, which is gaining attention as electrode materials for high-capacity lithium-ion secondary batteries, as well as magnesium balls. We welcome various requests regarding compounds, alloys, purity, particle size, and shapes, so please feel free to stop by our booth for consultation. We sincerely look forward to your visit.

Our company will be exhibiting at the "Fukushima Tech Create 2026 Results Presentation" held in Okuma Town, Fukushima Prefecture. At this event, promising startups aiming for entrepreneurship and technological development in areas such as Hamadori, Fukushima Prefecture, will present their research and business results. ★ Participating Industry Fields Decommissioning / Robotics and Drones / Energy, Environment, and Recycling Agriculture, Forestry, and Fisheries / Medical-related / Aerospace On the 29th (Thursday), a talk event featuring notable figures and local entrepreneurs will also be held. A collection of attention-grabbing technologies that will shape the future will be gathered, so please feel free to stop by the IIDA booth when you visit. [Limited Company Iida Seisakusho Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

Our company will be exhibiting at the "1st Mobility Material Exhibition during High-Performance Material Week." We sincerely look forward to your visit.

[Speaker] Yuichi Ikejiro, Deputy Director, Innovation Center, NTT Docomo Business Inc. [Key Lecture Content] NTT Docomo Business is responsible for corporate ICT business within the NTT Group. It provides a one-stop solution for corporate clients across the entire group, aiming to solve social issues and become a platform for industrial and regional digital transformation (DX) through support for large enterprises and local small and medium-sized enterprises. In this context, the Innovation Center plays a role in exploring and nurturing new business ideas, driving the creation of new businesses and their implementation in society. In this lecture, I would like to introduce the initiatives aimed at creating new businesses utilizing advanced technologies such as AI and IOWN that are promoted by the Innovation Center. [Lecture Items] 1. About NTT Docomo Business / Innovation Center 2. Technology roadmap looking towards 2030 3. Creation of new businesses through open innovation 4. Value creation promoted through design thinking 5. Initiatives for business creation utilizing advanced technologies such as AI, IoT/OT, and IOWN 6. Q&A / Business card exchange

[Speaker] President and CEO of ICT Solution Consulting Co., Ltd. / Creator Takashi Tominaga [Lecture Topics] 1. Review of last year's future predictions 2. Signs of a major upheaval (from 10 news stories) 3. Background of the major upheaval (triggered by Trump 2.0) - The U.S.-China space war and the emergence of disruptors (not innovators but destroyers) - Disruptors' destructive business models (subscription services, overwhelming cost competitiveness) 4. The essence of the major upheaval - The intersection of two massive revolutions (VC revolution and operation revolution) 5. What the major upheaval brings (making industry hierarchy (scale) meaningless) - Industries disintegrating (the risk of existing industries being taken over by platforms, especially in finance, healthcare, administration, national defense, IT, etc.) - Companies disintegrating (the possibility of bankruptcies of companies exceeding one trillion yen, encirclement by disruptors from small and medium-sized enterprises with technology) - Operations disintegrating (operation models using minimal human resources) - Employees disintegrating (the disappearance of the middle class, talent filtering by AI) 6. Overcoming the major upheaval and the concept of transformation (metamorphosis) 7. Q&A and business card exchange