We will hold the Japan Kistler Cutting Processing Technology Seminar 2022!

A general-purpose data acquisition system for controlling interfaces and charge amplifiers!

This DAQ system is versatile and serves as a data acquisition system for controlling interfaces and charge amplifiers. It is suitable for force measurement using single-component or multi-component force sensors, in addition to cutting power meters. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Easy installation using USB 2.0 port • Remote control of charge amplifiers • Powerful data acquisition system • High sampling rate • Trigger function

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Measure the three orthogonal components of force, enabling the measurement of extremely small forces with high resolution and high sensitivity!

The multi-component small power meter model 9119AA1 measures three orthogonal components of force and enables the measurement of extremely small forces due to its high resolution and sensitivity. ◇ Measurement range: ±4kN, Top plate: 39x80mm (9119AA1) / 55x80mm (9119AA2) －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Compact design • High sensitivity and natural frequency • Minimal temperature influence • Titanium top plate • Cutting force measurement in ultra-precision machining • Multi-component force measurement

• Other measurement, recording and measuring instruments

Measuring the three orthogonal components of force plus torque. Due to high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even slight dynamic changes in large forces and torques!

This 4-component dynamometer can measure the orthogonal three components of torque and force generated around the axis of the dynamometer. It features a high-rigidity structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces or torques. ◇ Measurement range: ±5kN/±200Nm, Top plate: Φ100 －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Compact, robust multi-component force measurement device ・Versatile ・For measuring cutting forces and grinding forces during drilling, milling, turning, and grinding operations.

• Torque Meter
• Other measurement, recording and measuring instruments

Minimizing the impact of temperature through a special arrangement method. Achieving high-quality measurements of dynamic processes in machining and force measurement!

The multi-component dynamometer model 9139AA measures three orthogonal components of force. Its robust and high-rigidity design allows for a wide measurement range, making it capable of high-load measurements. ◇ Measurement range: ±30kN, Top plate: 140x190mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Temperature compensation design (patented) • Compact and sturdy design • High natural frequency

• Other measurement, recording and measuring instruments

Sensors for data collection that support optimal processing conditions are active in a wide range of applications!

A fixed cutting dynamometer capable of calculating three-component forces and three-component moments during cutting and grinding processes. Its compact design and large measurement range make it suitable for installation in spaces with limited room. ◇ Measurement range: ±10kN, Top plate: 90x105mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・ Compact design ・ Large measurement range ・ Minimal temperature influence ・ Ideal for cutting force measurement ・ Suitable for multi-component measurement

• Other measurement, recording and measuring instruments

Due to its high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is being applied!

This quartz piezoelectric three-component dynamometer can measure the three orthogonal components of force. It features a high-stiffness structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces. ◇ Measurement range: -10 to 60 kN, Top plate: 260x260 mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Suitable for high-durability applications

• Other measurement, recording and measuring instruments

Due to its very high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is acting!

A fixed cutting dynamometer that can measure orthogonal three-component forces during cutting and grinding processes. It is ideal for optimizing cutting conditions and monitoring cutting states. Despite its wide measurement range (Fx, Fy, Fz: ±5 kN), it has excellent dynamic resolution (0.01 N), allowing for the measurement of very small dynamic changes in force even when large forces are acting. ◇ Measurement range: ±5 kN, top plate: 100x170 mm

• Other measurement, recording and measuring instruments

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Last month, we held a spring safety conference hosted by our company. We have compiled the details and atmosphere of the day into a PDF. We would appreciate it if you could take a moment to read it.

In recent years, as the importance of data integrity (DI) compliance in GMP environments has increased, there has been a growing call to deepen understanding of 21 CFR Part 11. This content introduces an on-demand presentation that organizes the background of Part 11, its relationship with DI, and its positioning in CSA guidance, while explaining the basic concepts of electronic records and electronic signatures. ■Content - Background and basic concepts of Part 11 - Relationship with data integrity (DI) - Positioning in CSA guidance - Basic requirements for electronic records/electronic signatures *This content is based on information as of March 17, 2026. *The information provided is intended for general informational purposes and does not guarantee specific compliance or suitability.