[Exhibition Announcement] We will showcase the simple type water stop board "Flood Guar F" at the 3rd Xiamen Disaster Prevention, Mitigation, and Emergency Rescue Technology and Equipment Exhibition.

Easily installable compared to general sandbags and water-absorbent sandbags. A simple type of water stop board to prevent flooding under the floor.

In recent years, flooding damage due to guerrilla rainstorms and typhoons has been increasing nationwide. In particular, flooding under floors accounts for about 60% of wind and water damage cases. Traditional sandbags take time to prepare, and for women and the elderly, preparation, transportation, and installation can be difficult. On the other hand, 'Flood Guard F' is extremely lightweight and easy to transport and install. Made of ABS resin, it has strong durability, can be resized according to the location of use, and can be compactly stored when not in use, complying with the 3R principles. 【Performance Comparison (Partial)】 <Speed> ■Flood Guard F: Can demonstrate its capabilities just by being placed, excellent for initial response ■Typical sandbags: Require the labor of filling with soil ■Water-absorbing sandbags: Require the process of soaking up water *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

The 'red flood barrier' is what can protect you from heavy rain and flooding damage.

"Flood Guard F" is a simple type of water barrier designed to prevent flooding caused by typhoons and sudden heavy rains. Made of lightweight, high-strength ABS, it can be installed quickly and is effective in emergencies. When not in use, it can be stacked for space-saving storage. 【Features】 ■ Two types: Maximum water stop height of 50cm for the "F50 series" and 80cm for the "F80 series" ■ Curved types "FN50/80・FW50/80" can be installed on curves ■ "FT50/80" can be adjusted to the best size from end to end of the installation area ■ "Double water stop" prevents leaks from the early stages of flooding ■ "Fitting bar" fills the gap between the wall and the water barrier, patented!! ■ "Catch clip" reduces leaks and makes it easy to connect multiple units *Catalogs and case studies are available for download via "PDF Download." Please feel free to contact us for inquiries.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Used for fine adjustments of the installation width.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing a sponge and water stop rubber, it significantly reduces leakage. Thanks to its slide structure, the external width can be adjusted within the range of 560 to 705 mm. ■FT50 Weight (kg): 6.6 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Integrated with the main water stop board, dramatically reducing water leakage damage.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing a sponge and water stop rubber, it significantly reduces water leakage. The side seal is a product used in combination with "Flood Guard F" to further reduce water leakage. ■ FS50 Side Seal Weight (kg): 1.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can create a 30-degree angle on the inside with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage caused by the increasing trend of typhoons and guerrilla rainstorms in recent years. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FN50 Weight (kg): 3.7 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can be set at a 30-degree angle outward with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trend of typhoons and sudden heavy rains in recent years. By installing a sponge and water stop rubber, it significantly reduces water leakage. ■FW50 Weight (kg): 3.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. By overlapping the protruding parts of the two connected units, they can be easily connected straight.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage caused by the increasing trend of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. For curved sections, FN (inner curved board) and FW (outer curved board) are used, while for straight gaps, FJ/FJL (gap boards) are utilized, ensuring effective leakage prevention even in complex site shapes, contributing to flood control measures. *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. You can use a combination of four different shapes.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from increasingly frequent typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces leakage. ■FZ50 Weight (kg): 4.4 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. By closely attaching the water stop board to the wall, damage in areas prone to leaks is reduced.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. ■FG50 R/L Weight (kg): 4.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 ■FGL50 R/L Weight (kg): 4.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

We will be exhibiting jointly with the JGC Group at "SEMICON JAPAN 2025" held at Tokyo Big Sight. <JGC Group Exhibition Overview> Since its founding, the JGC Group has been involved in various fields, including EPC (Engineering, Procurement, and Construction) for plants and factories representing oil refining and natural gas, as well as diverse businesses such as the manufacturing of catalysts, inorganic materials, and fine ceramics components. In the semiconductor field, we contribute to the semiconductor industry in multiple ways, focusing on "design and construction of semiconductor-related factories," "components for semiconductor manufacturing equipment," and "materials for semiconductor materials." <JFC Exhibition Overview> In the Japan Fine Ceramics corner, we will introduce products and application examples related to semiconductors. ● Application examples of "metal-ceramic composite materials" for temperature-controlled wafer chucks and cooling jackets ● Thin-walled rib structures "SiC ceramics" for lightweight, high-rigidity stages ● Ceramic substrates and thin-film metallized substrates ● High-performance "silicon nitride substrates" for power semiconductors ● Transparent alumina, low dielectric loss alumina, Li-ion conductors, cells for SOFC/SOEC, pressure sensors for hydrogen environments We look forward to welcoming you at our booth.

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room NO.12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities planned. We look forward to welcoming everyone!

Nitto Kohki will hold the "2025 Attack Fair in Kurume" at the "Local Production Kurume General Exhibition Hall" for two days from February 13 (Thursday) to February 14 (Friday), 2025. The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful commemorative gifts for visitors and many fun activities prepared. We look forward to welcoming everyone!

[Speaker] EY Strategy and Consulting Co., Ltd. Transaction and Corporate Finance M&A Advisory Director Naoki Saito [Key Lecture Content] In recent years, the grid-scale battery business has garnered significant attention from practitioners, particularly in the renewable energy sector. However, it is also true that there are several challenges that remain to be addressed for further investment expansion. In this lecture, we will explain the finance environment, various markets utilized for revenue generation, and the diversifying business schemes that could influence the success or failure of investment expansion. We will also introduce the current challenges related to each theme, the efforts of market participants towards their resolution or improvement, and future outlooks. [Lecture Items] 1. Overview of the business surrounding grid-scale batteries (historical trends, etc.) 2. Diversifying business schemes 3. Current challenges hindering further investment expansion (finance methods, etc.) 4. Various initiatives towards problem-solving 5. Q&A / Business card exchange