The Tesla meter, also known as a magnetometer or Gauss meter, is a high-precision and accurate magnetometer using the NMR method! ⇒ Metrolab NMR High-Precision Tesla Meter PT2026

The teslameter is also known as a magnetometer or gaussmeter. The PT2026 is a high-precision and accurate magnetometer using the NMR (nuclear magnetic resonance) method.

◆ Extremely high precision and accuracy in measuring magnetic flux density and magnetic field strength in strong magnetic fields - Wide measurement range: 38 mT to 30 T - Ultra-high precision: less than 10 ppb at 3T magnetic field - Capable of handling magnetic field gradients of 1000 ppm/cm at 1T magnetic field - Fastest measurement rate of 33Hz ◆ Pulse wave probe with flexible measurement range - One standard probe covers magnetic fields of 1.5T and 3T - 1326 probe: built-in 3-axis Hall element sensor - 1426 probe: suitable for narrow gaps, remote passive head - 1526 probe: suitable for narrow gaps, remote active head ◆ Rich features and expandability - Multifunctional software interface - Upgradeable to magnetic field camera MFC2046 - Upgradeable for multiple point measurements

• Other electric meters
• Testing Equipment and Devices
• Other inspection equipment and devices

The magnetic field measurement device manufactured by Swiss company Metrolab can measure strong magnetic fields with high precision.

We offer a range of products that can measure strong magnetic fields exceeding 20 T with high precision of 10 ppb, comparable to "international metrological standards." At Metrolab, we provide the following products: ◆ NMR Magnetometers - PT2026 NMR High-Precision Teslameter - MFC2046 Field Camera ◆ Fluxmeters - FDI2056 High-Speed Digital Integrator ◆ 3-Axis Magnetometers - THM1176 Hall Magnetometer - TFM1186 Fluxgate Magnetometer - HMC9076 Hall Field Camera - MagVector MV2 3-Axis Magnetic Sensor Element ◆ Reference Magnets - PM1055 Palm-Sized Reference Magnet

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Magnetic field analysis/electromagnetic wave analysis

Is it a precise and high-accuracy NMR magnetometer? Or is it a 3-axis magnetometer that can be carried anywhere and can measure various things? Please consider according to your application.

1. PT2026 NMR High-Precision Tesla Meter "Accurate and high-precision magnetometer" Features - NMR (Nuclear Magnetic Resonance): Accurate and high-precision magnetic field measurement technology - Probe measurement range: Supports both 1.5T and 3T with a single probe - High measurement rate: Up to 33 Hz - Upgradeable to Field Camera MFC2046 2. THM1176, TFM1186 Compact 3-Axis Magnetometer "Portable and capable of measuring various things" Features - Simultaneous measurement of magnetic field strength in X, Y, and Z axes - THM1176: Hall magnetometer - TFM1186: Fluxgate magnetometer - Connects to desktop PCs, laptops, and handheld PCs

• Other electric meters
• Testing Equipment and Devices
• Magnetic field analysis/electromagnetic wave analysis

This is a successor model that improved upon the MFC3045 magnetic field camera, which revolutionized magnetic field mapping of MRI magnets in the 1990s.

A very uniform magnetic field within a few ppm is required for MRI and similar technologies. NMR is the only magnetic measurement technology that can provide a magnetic field map with that level of precision. The conventional MFC3045 was a groundbreaking product that reduced the time required for magnetic field mapping from several hours to a few minutes, with a positioning error of less than 1mm, keeping human error and drift error at a negligible level. The MFC2046 is a new product that inherits the advantages of the conventional MFC3045 while implementing the following improvements: - Expanded the upper limit of the magnetic field strength that can be mapped from 7T to 30T - Reduced the minimum bore diameter that can be mapped from 220mm to 40mm - Increased the number of NMR probes that can be mounted on the probe array from 32 to 255

• Other electric meters
• Testing Equipment and Devices
• Magnetic field analysis/electromagnetic wave analysis

This is a three-axis magnetic sensor element integrated into a single chip. It can simultaneously measure magnetic flux density (Bx, By, Bz) in the range of 0.1T to 30T.

When trying to incorporate a sophisticated magnetometer into individual electronic devices, the MV2 is an ideal choice. It is also used in various products from Metrolab for magnetic field measurement, and a system has been established for electronic device designers to utilize MV2 technology. ■ Output signals (Bx, By, Bz) can be obtained in analog or digital form. ■ A board that operates with Arduino equipped with MV2 is also available for sale as the "MV2 Evaluation Kit."

• Sensors
• Other measurement, recording and measuring instruments
• Magnetic field analysis/electromagnetic wave analysis

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "24 Tissue Tubes 3.0ml Type" features a wide inner diameter of 13.4mm at the mouth, a low height of 25.9mm, and a flat bottom design, making it easy to insert and remove samples. Each tube is equipped with a 2D code on the bottom, allowing for efficient sample information management by using a 2D scanner to reflect the code in a PC database. Additionally, it is compatible with automated systems due to its SBS format. 【Features】 ■ Easy insertion and removal of samples ■ Particularly suitable for tissue/cell samples measuring 5mm to 7mm ■ Using our dedicated rack for 24 tubes allows for bulk reading of the 2D codes on the tube bottoms ■ Compatible with automated systems due to its SBS format ■ Made of polypropylene, autoclavable, and compatible with DMSO *For more details, please refer to the related links or feel free to contact us.

■Disadvantages of Conventional Antistatic Fluororesin Coatings - Requires high-temperature firing (around 400°C) - Applicable only to metals - Limited color options - Low mechanical strength ■Features of Safron LF+ - Can be processed at low temperatures (below 100°C) - Applicable to metals and resins - Color variations available - High friction coefficient and mechanical strength - Antistatic performance is equivalent to conventional Safron For more details, please check the product site.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.