Multi-Channel Jet FL-600E (Air Nozzle)
Multi-Channel Jet FL-600E (Manufactured by Germany's Lechler)
World's One, Air Nozzle with Orifice Cover - An air nozzle that achieves strong impact force with laminar flow - One of the best-selling products.
Rehiler Multi-Channel Jet (Air Nozzle) ≪Product Features≫ The air emitted is laminar (well-structured airflow), which allows for not only minimal impact force but also reduced noise levels. Additionally, by maintaining laminar flow, the amount of air consumed is minimized, and even with reduced pressure, the impact force does not decrease. In other words, this product contributes to energy savings and noise reduction. The blow pattern is straight (47mm width). ≪Significant Differences from Other Products≫ This product comes with an orifice cover (discharge hole adjustment plug). By using the orifice cover, it is possible to adjust the necessary air holes and suppress unnecessary air, making it a world-class product. ≪≪For Energy Savings, High Efficiency, and Noise Problem Solutions!≫≫ - Is the impact force sufficient? - Have you resolved the noise issues generated by the air nozzle? - Is the material suitable for use in food, medical, and pharmaceutical applications? The Rehiler Multi-Channel Jet is here to solve those concerns. Only Rehiler provides a catalog that includes impact force, noise levels, air consumption (energy-saving measures), and blow patterns!
Inquire About This Product
Related Videos
basic information
Material: POM Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics
Price information
-
Delivery Time
※Please contact each agency.
Applications/Examples of results
◆Examples of Use◆ ≪Removal≫ - Chips in the air blow chamber of cleaning equipment - Scrap after pressing - Burr removal, residual burrs - Chips from pressing, machining reference surfaces, etc. - Debris on surfaces before painting - Liquid drips from air knives, etc. ≪Cleaning≫ - Presses - Metals such as die-casting - Machining reference surfaces, etc. - Pallets - Blowing off parts and products - Debris on surfaces before painting - Before plating sheets, etc. - Bowls of weighing instruments - Chemical cleaning of parts and sheets, etc. ≪Air Blow≫ - Leak tester sections - Leveling release agents - Drying - Heating - Cooling - Stripping ≪Water Removal, Cooling, and Others≫ - After cleaning - Before plating sheets, etc. - Uniforming coating thickness (air knives, etc.) - Blowing off products - Air injection and cooling during packaging - Air curtains
Detailed information
-
Removal of water droplets before printing on the bottom of the can.
-
Cooling of the drill and blowing of chips (can also be used for lubrication application)
-
Blowing after molding and cleaning of the side mold.
Line up（18）
| Model number | overview |
|---|---|
| FL-600S | Shape: Flat / Material: POM (without pigment) |
| FL-600PP | Shape: Flat / Material: PP |
| FL-600H | Shape: Flat / Material: POM / Note: Air nozzle with half the width of FL-600E |
| FL-600A | Shape: Flat / Material: Aluminum |
| FL-600ST | Shape: Flat / Material: SUS316L |
| FL-600STW | Shape: Flat / Material: SUS316L / Note: The widest air nozzle in the flat type |
| FL-600SY | Shape: Flat / Material: SUS316L / Note: Angled type that can blow at a 90° angle |
| FL-600FC | Shape: Flat / Material: Iron/PVC |
| FL-600FK | Shape: Flat / Material: Brass/PVC |
| FL-600FE | Shape: Flat / Material: Brass/PVC |
| FL-600FM | Shape: Flat / Material: Brass/PVC |
| FL-600R | Shape: Round / Material: ABS |
| FL-600Z | Shape: Round / Material: Zinc |
| FL-600B | Shape: Round / Material: Brass |
| FL-600M4 | Shape: Round (Pinpoint) / Material: SUS316L / Note: The smallest air nozzle from Rehiller |
| FL-600M5 | Shape: Round (Pinpoint) / Material: SUS316L |
| FL-600M | Shape: Round (Pinpoint) / Material: Brass/POM |
| FL-600RM | Shape: Round / Material: Brass/PVC |
catalog（9）
Download All Catalogs
CAD data（3）
| Model number | overview | File |
|---|---|---|
| FL-600E | Multichannel Jet Free distribution of CAD drawings (2D and 3D) for the bestselling air nozzle, FL-600E, has begun. |
|
| FL-600E | Multichannel Jet Free distribution of CAD drawings (2D and 3D) for the bestselling air nozzle, FL-600E, has begun. |
|
| FL-600E | 3D CAD of Multi-Channel Jet (Air Nozzle) FL-600E |
|
News about this product（36）
Company information
Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. We have been widely collecting product information from around the world and providing products that meet market needs. In the future, we will continue to develop and deliver products that contribute to rationalization and particularly to environmental conservation, which has become increasingly stringent in recent years. ◇◆Main Products◇◆ - Precision industrial spray nozzles - Agricultural spray nozzles - Air nozzles / Air knives - Special spray nozzles - Tank cleaning nozzles - Blowers - Ultrasonic spray nozzles (Nebulizers / Atomizers) - Ultrasonic cleaning devices - Air conveying devices - Ventilators - Plastic connectors - Cutting torches (nozzles for gas cutters) - Latex testers - In-house manufactured tubing pumps (dispensers) - Syringe pumps