List of Measurement and Analysis products
- classification：Measurement and Analysis
9001～9045 item / All 53351 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
As an example of organic matter analysis, I would like to introduce a case where polyethylene glycol was analyzed.
- Contract Analysis
- Contract Inspection
- Contract measurement
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
By using micro-Raman, it is possible to evaluate the crystallinity in a fine range (1μm and above)!
- Contract Analysis
- Contract Inspection
- Contract measurement
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Comparison of components in liquid crystal panels using gas chromatography-mass spectrometry (GC-MS) is published!
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
What is the reason for this discoloration on the surface? Why are there cracks in such places? These issues will be resolved from the perspectives of electrons, atoms, molecules, and chemical reaction...
- Processing Contract
- others
- Other environmental analysis equipment
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Non-destructive depth analysis of thin films on the nm order is possible! We will also introduce analysis examples.
- Analytical Equipment and Devices
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Example of analysis using EBSD] Ch...](https://image.mono.ipros.com/public/product/image/9e0/2000533345/IPROS08836877231324882336.png?w=280&h=280){kind=small}
I will introduce an example of analysis using EBSD where orientation was observed in the Al wiring.
- Analytical Equipment and Devices
- Analysis Services
Example of analysis of compounds at the SAC solder and Ni pad interface.
We will introduce an example of the analysis of compounds formed at the interface between Sn-Ag-Cu solder and NiP pads. At the interface of NiP pads and Sn-Ag-Cu solder, compounds such as (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 grow, and surface analysis using EDX shows the distribution of Ni, Cu, and Sn within these compounds. The EBSD method is a technique that analyzes based on the crystallographic information of the sample. By combining it with elemental analysis using EDX, it is possible to estimate the composition, and in some cases, it may be possible to analyze using crystallographic data for Ni3Sn4 and Cu6Sn5 as substitutes.
![[Example of analysis using EBSD] Pi...](https://image.mono.ipros.com/public/product/image/897/2000533372/IPROS07160873482234831807.png?w=280&h=280){kind=small}
I will introduce an example of analysis using EBSD for pipes (austenitic).
- Analytical Equipment and Devices
- Analysis Services
Example of analysis of compounds at the SAC solder and Ni pad interface.
We will introduce an example of the analysis of compounds formed at the interface between Sn-Ag-Cu solder and NiP pads. At the interface of NiP pads and Sn-Ag-Cu solder, compounds such as (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 grow, and surface analysis using EDX shows the distribution of Ni, Cu, and Sn within these compounds. The EBSD method is a technique that analyzes based on the crystallographic information of the sample. By combining it with elemental analysis using EDX, it is possible to estimate the composition, and in some cases, it may be possible to analyze using crystallographic data for Ni3Sn4 and Cu6Sn5 as substitutes.
The EBSD method allows for the estimation of crystal size distribution and residual stress.
- Analytical Equipment and Devices
- Analysis Services
Example of analysis of compounds at the SAC solder and Ni pad interface.
We will introduce an example of the analysis of compounds formed at the interface between Sn-Ag-Cu solder and NiP pads. At the interface of NiP pads and Sn-Ag-Cu solder, compounds such as (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 grow, and surface analysis using EDX shows the distribution of Ni, Cu, and Sn within these compounds. The EBSD method is a technique that analyzes based on the crystallographic information of the sample. By combining it with elemental analysis using EDX, it is possible to estimate the composition, and in some cases, it may be possible to analyze using crystallographic data for Ni3Sn4 and Cu6Sn5 as substitutes.
![[Example of analysis using EBSD] Hi...](https://image.mono.ipros.com/public/product/image/a89/2000533387/IPROS76289936861552503680.png?w=280&h=280){kind=small}
Observing crystal structures with EBSD! Data can be obtained for each metal.
- Analytical Equipment and Devices
- Analysis Services
Example of analysis of compounds at the SAC solder and Ni pad interface.
We will introduce an example of the analysis of compounds formed at the interface between Sn-Ag-Cu solder and NiP pads. At the interface of NiP pads and Sn-Ag-Cu solder, compounds such as (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 grow, and surface analysis using EDX shows the distribution of Ni, Cu, and Sn within these compounds. The EBSD method is a technique that analyzes based on the crystallographic information of the sample. By combining it with elemental analysis using EDX, it is possible to estimate the composition, and in some cases, it may be possible to analyze using crystallographic data for Ni3Sn4 and Cu6Sn5 as substitutes.
Changes in crystal orientation and crystal grain size can be analyzed! We introduce the EBSD (Electron Backscatter Diffraction) method.
- Analytical Equipment and Devices
- Analysis Services
Example of analysis of compounds at the SAC solder and Ni pad interface.
We will introduce an example of the analysis of compounds formed at the interface between Sn-Ag-Cu solder and NiP pads. At the interface of NiP pads and Sn-Ag-Cu solder, compounds such as (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 grow, and surface analysis using EDX shows the distribution of Ni, Cu, and Sn within these compounds. The EBSD method is a technique that analyzes based on the crystallographic information of the sample. By combining it with elemental analysis using EDX, it is possible to estimate the composition, and in some cases, it may be possible to analyze using crystallographic data for Ni3Sn4 and Cu6Sn5 as substitutes.
![[Contract Analysis] Laser Microscop...](https://image.mono.ipros.com/public/product/image/983/2000535358/IPROS38656653090744213031.png?w=280&h=280){kind=small}
It is possible to perform 3D measurements of the surface roughness of samples and surface shape measurements through transparent objects!
- Contract Inspection
- Contract Analysis
- Contract measurement
Observation and measurement over a wide range are also possible! Here is an introduction to contract analysis using a laser microscope.
- Contract Inspection
- Contract Analysis
- Contract measurement
Optical film light transmission characteristics
At Aites Co., Ltd., we conduct "optical film analysis." Optical films used in smartphones and other devices have various functions depending on their structure and materials. We measured the light transmittance of privacy protection films at different angles and combined cross-sectional observation with Raman analysis to investigate the mechanism of function manifestation. By investigating the transmittance characteristics of privacy protection films using angle-variable spectrophotometry, we were able to analyze the mechanism of function manifestation through cross-sectional observation and Raman analysis. At Aites, we provide consistent evaluation and analysis from material properties to the mechanisms of function manifestation.
Since semiconductors have different physical properties, new methods are required for failure analysis!
- Analysis Services
- Contract Analysis
Announcement of the introduction of Talos F200E
Our company will introduce the FEI "Talos F200E" transmission electron microscope system. Compared to conventional models, the resolution for TEM and STEM has improved, and performance has been significantly enhanced, allowing for EDS analysis with four detectors. Additionally, it is equipped with features such as drift-corrected frame integration (DCFI), which accumulates multiple frames while correcting for drift.
We will introduce a comparison of brightness and characteristics between good products and ESD-damaged products, along with examples of luminescence analysis using EMS microscopy!
- Analysis Services
- Contract Analysis
Shorter delivery time than his method! Both shape observation using FIB-SEM and diffusion layer observation can be performed!
- Analysis Services
- Contract Analysis
Power device failure location / Slice & View three-dimensional reconstruction
I will introduce the three-dimensional reconstruction of failure locations using the Slice & View function of FIB-SEM. Continuous SEM images of the structure are obtained, and the resulting images are corrected for positional misalignment between the SEM images and visualized in three dimensions using 3D construction software (Avizo). By combining the position identification technique for cross-sectioning the failure location with the Slice & View function, it is possible to obtain continuous SEM images that retain the defective state and include information before and after the abnormal area.
EELS analysis for element identification allows for the comparison of the bonding states of materials!
- Analysis Services
- Contract Analysis
"SEM images" and "absorption current images (current sensing)" etc.! It identifies open defects in wiring and areas with high resistance defects.
- Analysis Services
- Contract Analysis
The inspector observes without missing anything! Consistent whisker evaluation is possible from reliability testing to analysis.
- Analysis Services
- Contract Analysis
Appearance observation and measurement services
We would like to introduce our "Appearance Observation and Measurement Service." We are equipped with a variety of devices to meet your needs, including appearance observation before and after reliability testing, solder joint observation, as well as dimensional measurements and surface roughness measurements of various components. You can also leave the pre-observation processing to us. Our company has IPC-certified IPC specialists on staff. We provide assistance with observations, consultations, and solutions to various observation-related concerns in accordance with international standards.
Cracks that couldn't be detected visually might be found with X-rays!
- X-ray inspection equipment
- Other inspection equipment and devices
Case study of failure analysis of oxide-based all-solid-state batteries
We will introduce a case where a series of analyses from failure location identification to cross-sectional observation was conducted on oxide-based all-solid-state batteries that were destroyed by reliability testing. Thermal analysis revealed a tendency for strong heat generation on the side, and X-ray transmission observation showed a white linear contrast anomaly near the boundary where heat generation was observed in the X-ray transmission image. It is suspected that some abnormality is occurring in the white line area. When cross-sectional SEM observation was performed on the area where the anomaly was visible, layer delamination was observed. It is speculated that the positive (negative) electrode layers expanded and contracted repeatedly due to reliability testing, leading to delamination between the current collector and the electrolyte layer.
We will introduce EBSD analysis that reveals areas where distortion has accumulated in the wiring of the bending section!
- Analysis Services
- Contract Analysis
We will narrow down the defective areas through lighting confirmation, panel disassembly, and optical microscope observation!
- Analysis Services
- Contract Analysis
Observation of Conductive Particle Shape in COG Implementation
We will introduce the observation of the shape of conductive particles in COG implementation. ICs and liquid crystal panels are implemented using the COG method with ACF (anisotropic conductive film). A resin ball is used as the core, and a metal layer (such as nickel or gold) for conductivity is deposited on its surface. During connection, the particles deform appropriately to electrically connect the IC and the panel. To confirm the degree of particle deformation and connection status, cross-sectional observations were conducted, revealing that the particle deformation was at a "medium" level, indicating an appropriate degree of deformation. By examining the deformation of conductive particles from both the planar and cross-sectional directions, we can explore the correlation with display defects. Please feel free to contact us for any inquiries regarding panel-related defects.
Analysis of inorganic compounds such as metal oxides is also possible! We will introduce the analysis of black spots on the surface of copper-clad laminates.
- Analysis Services
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Data] Research Institute of Chemic...](https://image.mono.ipros.com/public/product/image/7b8/2000545140/IPROS31249844525139364739.png?w=280&h=280){kind=small}
We will introduce a case that elucidates the differences in linear expansion coefficients of PET and PEN films with similar main skeletal structures and the mechanisms that produce these differences.
- Analytical Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Detection of certain organic substances is possible! Here is an example of measuring low molecular weight organic acids in an anion exchange mode.
- Analytical Equipment and Devices
- Other environmental analysis equipment
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
It is possible to monitor the progress of the adhesive curing reaction (degree of curing)!
- Other contract services
- Contract measurement
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
It is possible to apply up to 1000V in high temperature and high humidity environments for power devices! The degradation status of the device can also be monitored.
- Contract Analysis
- Contract measurement
- Contract Inspection
Reverse bias test of power devices (up to 2000V)
At Aites Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to a maximum of 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, if one device fails during the test, it will not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply to the device deemed faulty at the time of failure judgment. 【Specifications and Service Details】 ■ Test Voltage: Up to a maximum of DC 2000V ■ Applied Current: Up to a maximum of 14mA ■ Number of Test Devices: Up to a maximum of 8 (independent power supply) ■ Compatible Modules: TO-247, TO-220, etc. (other packages require consultation regarding connection methods) ■ Measurement Content: Monitoring of leakage current ■ Temperature Range: Up to a maximum of 200°C (85°C/85% in high temperature and high humidity conditions)
![[Data] Processing damage caused by ...](https://image.mono.ipros.com/public/product/image/f63/2000561876/IPROS65851844570330859801.png?w=280&h=280){kind=small}
If you have any dissatisfaction or questions regarding the finish of the grinding, please consult Aitesu!
- Contract Analysis
- Contract measurement
- Contract Inspection
We support evaluation tests for those who have a heavy burden of equipment introduction or cannot conduct tests due to a shortage of personnel!
- Vibration Testing
- Contract Inspection
- Impact Test
A measurement solution for more efficient and rational measurement of voltage, current, and temperature of electric components in vehicles (EV, HEV, PHEV).
- Ammeter
- Voltage Meter
- Testing Equipment and Devices
This is a probe sensor that safely and quickly detects current and voltage in low voltage systems (below 80V).
- Other electric meters
Essential item for high voltage measurement! With a breakout box that includes a shunt resistor, you can safely and easily perform high voltage measurements.
- Other measurement, recording and measuring instruments
We provide solutions for safely and rationally measuring the voltage and current of high-voltage components in actual vehicles.
- Electrical Instruments/Electrometers
Two zirconia-type λ sensors are used to calculate the EGR rate. They are lightweight and compact, making them ideal for in-vehicle measurements.
- Analytical Equipment and Devices
Introducing products that support the entire vehicle development cycle, including software rapid prototyping, ECU calibration, and data collection.
- Other measurement, recording and measuring instruments
- Embedded system design service
- Software (middle, driver, security, etc.)
Ultimate solution for current, voltage, and temperature measurement under low voltage: ultra-wide range and high precision measurement, logging of measurement data to USB memory.
- Electrical Instruments/Electrometers
- Data Logger
- Testing Equipment and Devices
Ultimate solution for current, voltage, and temperature measurement under low voltage: ultra-wide range and high precision measurement.
- Electrical Instruments/Electrometers
- Testing Equipment and Devices
- Other inspection equipment and devices
Ultimate solution for current, voltage, and temperature measurement under low voltage conditions. Ultra-wide range and high precision measurement. Measurement data is output via Ethernet.
- Power meter
- Voltage Meter
- Ammeter
This is a direct-mounted NH3 sensor for exhaust pipes. It does not require auxiliary equipment such as pumps, making it ideal for onboard measurements.
- Analytical Equipment and Devices
- Other measurement, recording and measuring instruments
We will measure NOx, λ, A/F, and O2. Since it is a directly mounted sensor on the exhaust pipe, no auxiliary equipment is needed, making it ideal for onboard measurements.
- Analytical Equipment and Devices
- Other measurement, recording and measuring instruments
This is a sensor that comprehensively measures CO, CO2, λ, A/F, and O2. It is a direct-mount type for exhaust pipes, making it ideal for in-vehicle measurements.
- Analytical Equipment and Devices
- Other measurement, recording and measuring instruments
- Other environmental analysis equipment
The onboard λ sensor measures λ, O2, A/F, φ, and %O2. Since it is a directly mounted sensor on the exhaust pipe, it is ideal for onboard measurements.
- Analytical Equipment and Devices
- Other measurement, recording and measuring instruments
- Other environmental analysis equipment
Measurable λ, NOx, CO/CO2, NH3, PM/PN! Compatible with CAN and analog output! Excellent cost performance. Comprehensive catalog from ECM.
- Analytical Equipment and Devices
- Other measurement, recording and measuring instruments
- Other environmental analysis equipment
Bidirectional conversion of analog voltage, digital signals, and PWM pulse signals to CAN signals is possible!
- Converters and Transducers
- Other network tools
- Recorders
VISION has a variety of functions ranging from basic data collection to post-analysis, ECU adaptation, and ultimately rapid prototyping.
- Other network tools
- Data Logger