Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 375 items
Since there are no moving parts, it can be measured at 0 m/s or higher.
By adopting a reflective method, the measurement section is compact, resulting in less wind disturbance in the measurement area compared to conventional types, allowing measurements even in strong wind zones.
Achieving complete brushless and digitalization.
The measurement distance can be up to a maximum of 1 km.
Obtained meteorological agency type certification.
It is a small, lightweight, and highly responsive three-cup anemometer.
The wind direction and speed transmitter is designed to be compact and lightweight, making installation easy.
Records are easy to handle using the wired dot method.
Display the instantaneous or average wind direction and speed in an easily visible digital format.
It is equipped with a freely configurable two-point alarm function, as well as a variety of features such as analog output, RS-232C signal output, expansion signal, fuse break signal, and adjustment signal output.
Used for atmospheric dispersion studies, environmental assessments, and wind spectrum analysis.
It can be measured at 0 m/s because there are no moving parts.
Indicate the wind speed values on an easy-to-read analog meter.
No power supply is needed.
The transmitter is made entirely of resin, making it compact and lightweight, which facilitates easy installation.
The transmitter features a functional beauty design that matches the aesthetics of its surroundings.
Wind direction and speed meter for small vessels
It is an easy-to-read digital display anemometer for wind direction and speed.
Propeller-type wind direction and speed meter with a built-in heater.
The heater capacity is increased (1620W), allowing it to be used not only in heavy snowfall areas but also in mountainous regions and areas with frost-covered trees.
Easy-to-hold handheld anemometer
You can fix the instructions and read the measurement values with one-handed operation.
Fiber optic wind direction and speed meter
All signals from the detection of wind direction and speed to transmission are conducted using light.
Measuring the wind speed inside the duct.
It is used for airflow control, etc.
An anemometer designed for installation on ships.
It is equipped with essential NMEA output for foreign ships.
Measurement range from 0 to 90 m/s, capable of measuring strong winds.
A new method allows for stable measurements using a 1-head transmission and 3-head reception system (Japanese Patent Application No. 2008-75308, Published Patent Application No. 2009-229256).
We offer a wide range of anemometers of various types that live up to the name "Kaze no Hikari Shin."
This is a new type of ultrasonic anemometer that can measure strong winds up to 90 m/s, which was difficult to measure with conventional ultrasonic anemometers.
For the safe operation of aircraft! Long-lasting and energy-saving Sanko-shiya aviation obstruction light system.
The "Aviation Obstruction Light Catalog" is a catalog from Sanko Shiya Co., Ltd., which focuses on lightning protection through the development, manufacturing, and sales of lightning rods and safety devices, while also engaging in the development of meteorological observation devices, optical communication-related products, and meteorological information services. Our aviation obstruction lights, which meet strict standards, are highly regarded as "environmentally friendly aviation obstruction lights" due to their long lifespan and low power consumption. The catalog includes the long-lifespan aviation obstruction light "OM-3C type," as well as contact monitoring devices and core fault detection devices. [Contents Included] ■ Examples of light installation ■ Aviation obstruction light lineup ■ Solar-powered aviation obstruction light system ■ Control panel ■ Monitoring and detection devices *For more details, please refer to the catalog or feel free to contact us.
This is a handheld digital anemometer capable of measuring wind speed, temperature, and air volume.
The thermal (heat) anemometer NS-WT series has a sensor section that is constantly heated to a constant temperature, and when cooled by airflow, the temperature is maintained by a protective circuit. The overheating current during this process is proportional to the airflow velocity (wind speed). The temperature is measured by a thermistor sensor. There are two types available: the straight type NS-WT 110 and the L-type NS-WT 115. 【Features】 - Wind speed and temperature measurement - Airflow calculation - Low wind speed measurement - Average value calculation function - Backlight - Hold value, minimum and maximum value display - Automatic power off ☆ Measurement range: 0.15 to 30 m/s, 0 to 99999 m³/h, -20 to +80°C ☆ Power supply: 4 LR03 (1.5 V) batteries ☆ Weight: Approximately 250 g
This product is a sensor that combines an anemometer and a wind vane. The wind direction is measured using a vane type, and the wind speed is measured using a cup type. It features resistance and pulse output.
☆ Measurement range 45 m/s ☆ Low-speed startup ☆ Wide operating temperature range ☆ Independent operation of wind direction and wind speed ☆ Excellent tracking performance with cup type
We measure the wind direction and speed in the X, Y, and Z directions using ultrasound.
The WindMaster II series is ideal for turbulence measurement in applications such as bridges, buildings, wind power turbines, ventilation control systems, meteorology, and flux research. It also supports digital output of vectors using U, V, and W, and can output sound speed and virtual temperature. The WindMaster II is made of aluminum and carbon fiber, with a selectable sampling rate of 20Hz (standard) or 32Hz (optional). Analog input and output can be chosen between 12-bit and 14-bit. The WindMaster Pro II is made of stainless steel, with a maximum measurement range of up to 65m/s and a standard sampling rate of 32Hz. Vertical observation and sound speed accuracy have been improved, and strain caused by wind pressure has been alleviated. Analog input, output, and PRT (optional) can be added with a resolution of 14 bits.
Capable of measuring up to 700℃! A versatile anemometer that is widely used for measuring in drying ovens and exhaust ducts.
The "V-02-ADN" is a thermal anemometer capable of measuring temperatures up to 700°C. It can simultaneously display wind speed and wind temperature, making it useful in a wide range of applications such as measuring in drying ovens and exhaust ducts. Additionally, by using optional cables, it can be connected to general-purpose data loggers and other devices. 【Features】 ■ Capable of measuring up to 700°C ■ Simultaneous display of wind speed and wind temperature ■ Supports analog output ■ Two types of sensor probes available ■ Customization of sensor probe shape and specifications is possible ■ Compliant with JIS standard T8202 *For more details, please refer to the PDF document or feel free to contact us.
Wide Temperature Range Hot-Wire Anemometer V-02-ADN Series
Simultaneous measurement of wind speed and wind sound Active in a wide range of fields such as measurement of drying ovens and exhaust ducts ● Bright LED display ● Supports simultaneous analog output ● Traceability compliant Compliant with JIS Z8808 / JIS T8202
