Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 370 items
We contribute to quality control of products and improvement of productivity.
Simultaneous measurement of wind speed and wind temperature in high-temperature environments up to 500℃ (with wind speed accuracy compensation range up to 400℃).
Usable in explosion-proof areas! A thermal anemometer that can measure in a wide range of environments from -20 to +125℃.
The "HFA-Ex40" is an explosion-proof thermal anemometer that can measure in a wide range of environments from -20 to +125°C. It can measure the flow rates of exhaust gases, biogas, corrosive gases, and more. Additionally, it features an "average measurement mode" that allows for customizable time settings from 1 to 9999 seconds. 【Features】 ■ The display panel can show measurement values in two stages and can display messages. ■ Equipped with an average measurement mode. ■ Capable of measuring in a wide range of environments from -20 to +125°C. *For more details, please contact us.
It receives signals from a 3-cup anemometer sensor and can observe wind speeds from light breezes to strong winds.
The digital LCD anemometer OWL-3S receives signals from a three-cup anemometer sensor and can observe wind speeds from light breezes to strong winds. The observation data indicates instantaneous and average wind speeds, as well as the maximum instantaneous wind speed over a 10-minute period, visually displaying fine wind movements with a level meter. In addition to analog output, it features RS-232C output and three wind speed alarm functions, with significantly improved noise resistance due to digitization. 【Features】 ○ Capable of measuring wind speeds from light breezes (0.5 m/s) to strong winds (60 m/s) → Average wind speed can be set to change between 1 to 600 seconds ○ Significantly improved noise resistance due to digitization ○ Compatible with both AC and DC power supplies → DC power can be used with 12/24V batteries For more details, please contact us.
Achieve indoor and in-flight airflow monitoring! An anemometer that quantifies and records airflow.
The WA-790 is compact and lightweight, making it easy to move and install at measurement locations. It accurately measures airflow disturbances caused by equipment in clean rooms and changes in airflow within narrow devices. It visualizes points that have been overlooked or could not be measured before, contributing to a better understanding of the actual conditions. 【Features】 ○ New digital processing using DSP (high-speed processing unit) enables reliable data acquisition. ○ Compact design that integrates the conventional connection box and main unit (can be fixed to a tripod using standard mounting brackets). ○ Probe cable extended to 5m to suit the usage environment (previously 3m). ○ No moving parts, allowing measurements to follow transient changes from a gentle breeze (approximately 0m/s). ○ No calibration required due to temperature changes, thanks to the ultrasonic method. For more details, please contact us or download the catalog.
No power supply or signal cables are needed for wind speed measurement! It can measure wind speed from a distance of up to 1 km.
At Rex Co., Ltd., we rent measuring instruments such as measuring devices and scales. The "N-30SGR" is a wireless wind speed measurement system powered by self-generated electricity. The wind causes the anemometer cups to rotate, and the generated power from the AC generator directly connected to the cups is used to wirelessly transmit the wind speed data at that moment. In safety management for port crane operations and high-altitude work, it has previously been difficult to monitor wind speed in locations where laying signal cables or bringing in power was challenging. Now, it is possible to easily monitor wind speed in these areas. 【Features】 ■ Does not use commercial power or batteries ■ Realizes eco-friendly measurement without power supply or cables ■ Communication distance of up to approximately 1 km (line of sight) ■ Can utilize existing wind speed measurement equipment ■ The receiver is equipped with both analog and digital outputs *For more details, please refer to the external link page or feel free to contact us.
For testing relatively weak wind speeds. Simple and user-friendly design.
This is a thermal anemometer with a measurement range of 0.05 to 20.0 m/s. It features an intuitive and simple button layout for ease of operation. Its compact size makes it easy to carry. It also includes a backlight for use in dark environments. *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote through "Contact Us." Feel free to reach out.*
This anemometer can measure wind speed, wind temperature, and pressure with a single device, and it is capable of measuring wind speeds up to 50 m/s.
The large body design with a lid, considering measurements inside pipes and ducts, makes storage easy. It comes with a shoulder strap, making it convenient for carrying and measuring. In the Model 611 series, the probe and main unit are compatible, allowing for quick responses to sudden probe failures on-site. Additionally, it is equipped with a standard RS-232C communication terminal (communication cable is optional), enabling direct transfer of stored data and raw data to a computer (it can save 100 measurement data points).
It is a data logger anemometer (vane type) equipped with an SD slot.
By simply importing the SD card (included 1G) into your computer, you can edit Excel data. It is user-friendly with data hold function and Max/Min display function. Additionally, it has a backlight, making it convenient for measurements in dark places.
It is a hot-wire anemometer that can measure wind speed, air volume, and temperature.
Wind speed can be displayed in five types: m/s, km/h, knots, mph, and ft/min. The DT-8880 can transfer real-time data of wind speed, air volume, and temperature to a computer at one-second intervals using the analysis software and USB cable included in the set. The measured data can be displayed in graphs over time. The recorded data can be saved simultaneously in two formats: *.csv and *.txt.
This anemometer is capable of measuring strong winds up to 45 m/s.
- It also supports the measurement of light wind speed. - The wind speed can be displayed in m/s, km/h, or knots.
A system that accurately records wind speed, capable of measuring up to a maximum wind speed of 44.7 m/s.
The Wind-101A is an all-weather data logger with a protective case, equipped with a three-cup anemometer sensor and assembled with cables. The wiring between the data logger and the anemometer sensor is pre-done, allowing for immediate use. The data logger has a large memory capacity of 500,000, which can accommodate continuous wind speed measurements for over 11 days with measurements taken once per minute. The measurement interval can be freely set between once every second and once every 24 hours. The Wind-101A comes as a set that includes the data logger (in an all-weather protective case), a three-cup anemometer sensor, cables, analysis software, and a USB cable. The mounting pipe for the anemometer sensor is not included.
This is a wind speed meter with an alarm, composed of a small cup-type pulse transmitter and an analog indicator receiver, capable of measuring wind speeds from light breezes to strong winds.
The emission unit of the small cup-type pulse anemometer 260-SP converts the opening of the wind cups into a series of electrical pulse signals using a light sensor, and this signal is superimposed on the power supply and transmitted to the receiving unit. The receiving unit receives this signal and selects any measurement mode from instantaneous or average wind speed, conducting wind observations through support and wind speed alarm detection functions. It is ideal for use with mobile cranes and is excellent in terms of aging changes and the influence of surrounding temperatures, measuring wind speeds from low (1.0 m/s) to strong (40 m/s) with a track wind speed of 1.0 m/s. The power supply can be used with either a DC 12V or 24V battery.
The OWL-3S is a digital anemometer with an LCD display. It receives signals from a 3-cup (cup-type) anemometer sensor and can measure wind speeds from light breezes to strong winds.
- Capable of measuring wind speeds from a light breeze (0.5 m/s) to strong winds (60 m/s), with the average wind speed adjustable between 1 to 600 seconds. - Noise resistance performance has been significantly improved through digitization. - Compatible with both AC and DC power sources, with DC power usable from 12/24V batteries. - Can simultaneously display instantaneous, average, and maximum instantaneous wind speeds over 10 minutes. - Standard features include analog output (4-20 mA) and RS-232C output. - Equipped with three wind speed alarm outputs, with alarm values adjustable in menu mode. - Built-in lightning protection improves surge resistance against induced lightning and other surges.
Standard equipped with wind direction and wind speed alarm output function! Wind direction and wind speed sensor with excellent corrosion resistance.
We would like to introduce our "Young Digital Anemometer." Wind direction is displayed using 36 LED dots, and wind speed is shown digitally. Additionally, using RS-485, up to 16 displays can be connected in series to a single sensor. Furthermore, due to its compact and lightweight design, installation, removal, and maintenance are easy. Please feel free to contact us if you have any inquiries. 【Features】 ■ Corrosion-resistant wind direction and speed sensor (Wind Monitor) ■ Versatile wind direction and speed display (Wind Tracker) *For more details, please download the PDF or feel free to contact us.
Block build method! Compact and lightweight, with a grip for handheld use.
We would like to introduce our "Handheld Anemometer." This is a compact and lightweight handheld anemometer with a grip. The measurement range for wind speed is 2 to 30 m/s, with dimensions of φ174×(H)313mm and a weight of approximately 0.7 kg. Thanks to its block build design, it can also be used as a differential anemometer. 【Specifications】 ■ Measurement Range: Wind speed 2 to 30 m/s ■ Dimensions: φ174×(H)313mm ■ Weight: Approximately 0.7 kg *For more details, please download the PDF or feel free to contact us.
We will introduce aviation weather observation systems and meteorological information collection systems for firefighting and disaster prevention.
The "Meteorological, Hydrological, Maritime, and Power Supply Products" catalog includes not only the observation of wind direction and speed, which are particularly important during takeoff and landing, but also the aggregation and processing of meteorological observations such as cloud height, visibility on the runway, temperature, humidity, rainfall, and atmospheric pressure through the "Aviation Meteorological Observation System." It also features the "Road Meteorological Observation System," which provides essential weather information for road management, including strong winds, heavy rain, snowfall, and road surface freezing. We offer comprehensive support from system proposal, design, and manufacturing to maintenance management. 【Featured Products】 ○ Public Transportation Solutions ○ Firefighting and Disaster Prevention Solutions ○ Environmental Solutions ○ Maritime Solutions, etc. For more details, please contact us or download the catalog.
Ultra-compact and ultra-lightweight! For underwater measurement, scour investigation, river pier, and breakwater scour.
The "MODEL 881A" is a super compact variable frequency profiling sonar. It is capable of precisely measuring the cross-sectional shape of any space. The measurement distance can be set arbitrarily within the range of 1m to 100m, and the exploration range can be adjusted from a maximum of 360° to 0° (in increments of 0.3°). Control is done via a laptop, taking up minimal space, and data recording and editing on the hard disk is easy. 【Features】 ■ Super compact and lightweight ■ Frequency can be finely adjusted (600kHz to 1.1MHz in increments of 5kHz) ■ Easy operation with Windows-compatible software ■ Underwater measurement, scour investigation, river pier, and breakwater scour *For more details, please refer to the PDF document or feel free to contact us.
Excellent durability, perfect for stable observations! High-performance tipping bucket rain gauge.
The "34T-BP" is a high-precision tipping bucket rain gauge. It uses a non-contact reed switch for the contact part, eliminating concerns about mechanical failures such as wear resistance and clogging from debris. We also offer a version with a built-in heater for freeze prevention, suitable for cold climates (rain gauge 34T-HT-BP). 【Features】 ■ Highly reliable tipping bucket rain gauge ■ Capable of stable rainfall observation over long periods ■ Durability and environmental resistance *For more details, please refer to the catalog or feel free to contact us.
The measuring device is stored in a waterproof case! You can choose between a standalone type and a network type!
This product is a set that includes the airplane-shaped anemometer "FTJ500" and a measuring instrument (data logger). The power supply can be selected from solar cell specifications or AC100V specifications. The measuring instrument is housed in a waterproof case, so by simply installing the sensor, waterproof case, and solar panel (only for solar cell specifications) on-site, measurement data will be recorded in the internal memory of the data logger. Additionally, in addition to the standalone type, a network (LTE or Wi-Fi) type can be selected. 【Features】 ■ Records wind speed and direction data ■ Low power consumption and high reliability ■ Power supply: selectable from solar cell specifications or AC100V specifications ■ The measuring instrument is housed in a waterproof case *For more details, please refer to the PDF document or feel free to contact us.
Display data in real-time! It also has alarm functions and RS232C/analog output capabilities!
This product is a set consisting of the wind direction and speed meter "FTJ500" and the display unit "LM-WIND2." It can display wind direction and speed data in real-time while recording it to an SD card. It also features an alarm function for wind speed values and RS232C/analog output capabilities. The wind direction is displayed as a dot representation using LEDs for 16 directions, and the wind speed can be switched between average wind speed and instantaneous/maximum instantaneous wind speed. 【Features】 ■ Real-time display of wind direction and speed values from the airplane-type wind direction and speed meter ■ Wind direction and speed data can be recorded on an SD card ■ Equipped with alarm function for wind speed values and RS232C/analog output capabilities ■ Wind direction is displayed as a dot representation using LEDs for 16 directions ■ Wind speed can be switched between average wind speed and instantaneous/maximum instantaneous wind speed *For more details, please refer to the PDF document or feel free to contact us.
Simultaneously display instantaneous wind speed, average wind speed, and maximum instantaneous wind speed over 10 minutes! Unit switch between m/s and knots is possible!
This product is a set consisting of the small anemometer "FTM45A" and the wind speed recording display "LM-WIND-SP." It is capable of recording wind speed data to an SD card while displaying it in real-time. The wind speed values can simultaneously show instantaneous wind speed, average wind speed, and maximum instantaneous wind speed over 10 minutes, with the option to switch between m/s and knots. Additionally, it is equipped with DC 4-20mA output, RS232C output, and alarm output functions. 【Features】 ■ Real-time display of wind speed values from the anemometer ■ Wind speed data can be recorded on an SD card ■ Simultaneous display of instantaneous wind speed, average wind speed, and maximum instantaneous wind speed over 10 minutes ■ Option to switch between m/s and knots ■ Equipped with DC 4-20mA output, RS232C output, and alarm output functions *For more details, please refer to the PDF document or feel free to contact us.
A high cost-performance model that can output without a converter! It can be observed immediately after power on, and is an easy-to-use wind direction and speed meter.
The Komatsu Manufacturing Company's "W855-E1S4-Z1" is an output-equipped anemometer that can measure wind direction and speed from a gentle breeze of 0.4 m/s to a strong wind of 90 m/s. Since it has an output, there is no need for a converter that was previously required, and you can obtain voltage and serial output simply by turning on the power. If you have a data logger or recording device, you can start measuring immediately, making it a cost-effective and very user-friendly product. 【Features】 ■ Output-equipped type that does not require a converter ■ Excellent cost performance ■ Immediate observation possible upon powering on *For more details, please refer to the PDF document or feel free to contact us.
It is possible to select appropriate navigation speed and direction even at night or in bad weather! Oil spill detection is also available as an option!
"WAVEX" is an online wave monitoring system for vessels developed to ensure safe and efficient operation management. Even in environments with poor visibility, such as at night or during rough weather, crew members can monitor the sea surface conditions in real-time and observe changes in wave and weather conditions. By facilitating appropriate decision-making, it can reduce damage to the hull and cargo caused by waves. It can be easily installed on existing vessels and used as a navigation support system, as well as contributing to fuel efficiency optimization and route planning improvements. 【Features】 ■ Easily installable on existing vessels ■ No need for docking, with low maintenance costs ■ Utilizes signals from marine X-band radar ■ Can be installed on observation vessels, general vessels, and offshore structures such as oil rigs ■ Capable of recording GPS, gyro, wind direction, and wind speed data *For more details, please refer to the PDF materials or feel free to contact us.
Long-standing achievements in diverse weather conditions! A more comprehensive upper-atmosphere weather program can be developed.
The "Vaisala DigiCORA" is an important tool for pursuing the availability of meteorological data, specifically an unmanned observation system known as the Autozonde. It can expand the coverage of the upper atmospheric meteorological network provided by national-level meteorological services to geographically distant and hard-to-reach locations, resulting in the development of a more comprehensive synoptic upper atmospheric meteorological program. It is possible to configure settings suitable for the characteristics of the location where it will be used. 【Features】 ■ Ability to expand the coverage of the upper atmospheric meteorological network to geographically distant and hard-to-reach locations ■ Development of a more comprehensive synoptic upper atmospheric meteorological program ■ Long-standing performance in diverse weather conditions ■ Configurable settings suitable for the characteristics of the location where it will be used * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.
Capable of computing over 30 weather parameters! Robust design intended for harsh environments and transportation.
The "MARWIN MW32" is a high-altitude observation system that simplifies equipment while maintaining the high precision and functionality of traditional high-altitude observations, allowing for quick observations even in harsh outdoor environments. It acquires meteorological profile data suitable for ballistic weather and numerical forecasting models. In tactical environments, rapidly understanding the atmospheric conditions from the ground to high altitudes is considered extremely important. 【Features】 ■ Acquires meteorological profile data suitable for ballistic weather and numerical forecasting models ■ Robust design intended for harsh environments and transportation ■ Easy operability through a menu format with an integrated display and keyboard ■ Supports messages related to STANAG and WMO formats ■ Capable of calculating over 30 meteorological parameters * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.
Easily build a meteorological observation system! A comprehensive weather observation web server with no moving parts and a long lifespan.
"WMS2" is a comprehensive weather observation web server that has the essential basic functions required for a meteorological observation system built-in as standard. By connecting to Vaisala weather sensors, you can build a standalone web server. To enhance compatibility with external networks, in addition to the traditional automatic FTP data transfer function and socket communication function, the JSON format data response function has been strengthened, making it possible to use it as a front processor for sensor connections targeting IoT. 【Features】 - Integration of three functions: measurement, accumulation, and viewing - Dedicated to Vaisala weather sensors - Standalone web server - Wide temperature range - Compact and lightweight *For more details, please refer to the PDF materials or feel free to contact us.
ARVOR-C is a pressure-resistant float developed for coastal area observation, capable of operating at depths of 300 meters and equipped with Iridium communication.
ARVOR-C is a coastal observation float designed to withstand pressures of up to 300 meters. It comes standard with a Sea Bird CTD sensor, capable of measuring water temperature, salinity, and pressure. Various data is collected via Iridium communication (SBD). By allowing it to settle on the seabed during descent, it becomes less affected by tidal currents, enabling long-term observations without drifting far from the deployment area. Various parameters can be easily set via Bluetooth connection, and it features a self-buoyancy function, eliminating the need for buoyancy adjustments. *For more details, please refer to the PDF document or feel free to contact us.*
DEEP ARVOR is a deep-sea observation iridium communication float designed for the ARGO project, capable of withstanding pressures of 4000 meters.
DEEP ARVOR is a deep-sea observation float designed for a pressure of 4000 meters. It is designed for the ARGO project and comes standard with a CTD sensor manufactured by Sea Bird. In addition to water temperature, salinity, and pressure, a DO sensor (manufactured by Aanderaa) can be added, allowing for the observation of up to four parameters. Various data is collected via Iridium communication (SBD). Various parameters can be easily set via Bluetooth connection, and it has a self-ballasting function, eliminating the need for buoyancy adjustment. *For more details, please refer to the PDF document or feel free to contact us.*
The WindCube lidar for aviation safety is the best solution to mitigate wind hazards at airports.
To maintain safety at the airport and its surrounding areas, it is essential to accurately and quickly detect wind shear and understand wind conditions. The WindCube lidar provides real-time data necessary for air traffic controllers, pilots, and meteorologists to grasp wind conditions and make appropriate operational decisions. ■Improved Safety The high-resolution wind shear detection capabilities of WindCube reduce weather-related risks. ■Support Beyond Wind Shear WindCube also provides detailed information on wind and turbulence conditions around the airport, enhancing the understanding of wind situations. *For more details, please refer to the PDF document or feel free to contact us.*
It is a sea surface iridium beacon that enables stable communication even when inverted.
ROVER is a sea surface iridium beacon designed with UV protection and a robust housing. It is equipped with antennas on both the top (white) and bottom (black) to ensure stable GPS transmission even when inverted. Through Iridium communication, it enables the reception of GPS data and remote control of the beacon. *For more details, please refer to the PDF document or feel free to contact us.*
