We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Anemometer.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Anemometer Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Anemometer Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. ソニック Tokyo//Industrial Electrical Equipment
  2. 光進電気工業 自然計測ディビジョン Tokyo//environment
  3. 三興通商 Tokyo//Industrial Electrical Equipment
  4. セントロニック Kanagawa//Industrial Electrical Equipment
  5. 5 ハイドロテック Shiga//Testing, Analysis and Measurement
Go to Company Ranking

Anemometer Product ranking

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. Explosion-proof anemometer [Anemometer usable in explosion-proof areas, high-temperature, and dust areas] セントロニック
  2. Full-Range Scanning Sonar "SCS-60" ソニック
  3. Keller Company Barometer PAA-33X / 800 to 1200 hPa KELLER Pressure Japan 日本支社
  4. 4 Water Level Measurement Device "LGSM-2.V2" ソニック
  5. 4 2D ultrasonic wind direction and speed meter 'SA-11/SA-21' ソニック

Anemometer Product List

91～105 item / All 325 items

Displayed results
Wind Speed Data Logger Wind-101A

Wind Speed Data Logger Wind-101A

A system that accurately records wind speed, capable of measuring up to a maximum wind speed of 44.7 m/s.

The Wind-101A is an all-weather data logger with a protective case, equipped with a three-cup anemometer sensor and assembled with cables. The wiring between the data logger and the anemometer sensor is pre-done, allowing for immediate use. The data logger has a large memory capacity of 500,000, which can accommodate continuous wind speed measurements for over 11 days with measurements taken once per minute. The measurement interval can be freely set between once every second and once every 24 hours. The Wind-101A comes as a set that includes the data logger (in an all-weather protective case), a three-cup anemometer sensor, cables, analysis software, and a USB cable. The mounting pipe for the anemometer sensor is not included.

  • Wind Speed/Volume Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cup Anemometer Small Cup Type Pulse Anemometer 260-SP

Cup Anemometer Small Cup Type Pulse Anemometer 260-SP

This is a wind speed meter with an alarm, composed of a small cup-type pulse transmitter and an analog indicator receiver, capable of measuring wind speeds from light breezes to strong winds.

The emission unit of the small cup-type pulse anemometer 260-SP converts the opening of the wind cups into a series of electrical pulse signals using a light sensor, and this signal is superimposed on the power supply and transmitted to the receiving unit. The receiving unit receives this signal and selects any measurement mode from instantaneous or average wind speed, conducting wind observations through support and wind speed alarm detection functions. It is ideal for use with mobile cranes and is excellent in terms of aging changes and the influence of surrounding temperatures, measuring wind speeds from low (1.0 m/s) to strong (40 m/s) with a track wind speed of 1.0 m/s. The power supply can be used with either a DC 12V or 24V battery.

  • Wind Speed/Volume Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital LCD Anemometer OWL-3S

Digital LCD Anemometer OWL-3S

The OWL-3S is a digital anemometer with an LCD display. It receives signals from a 3-cup (cup-type) anemometer sensor and can measure wind speeds from light breezes to strong winds.

- Capable of measuring wind speeds from a light breeze (0.5 m/s) to strong winds (60 m/s), with the average wind speed adjustable between 1 to 600 seconds. - Noise resistance performance has been significantly improved through digitization. - Compatible with both AC and DC power sources, with DC power usable from 12/24V batteries. - Can simultaneously display instantaneous, average, and maximum instantaneous wind speeds over 10 minutes. - Standard features include analog output (4-20 mA) and RS-232C output. - Equipped with three wind speed alarm outputs, with alarm values adjustable in menu mode. - Built-in lightning protection improves surge resistance against induced lightning and other surges.

  • Wind Speed/Volume Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Digital Jellyfish Case Study] Utilization as Evidence Data

[Digital Jellyfish Case Study] Utilization as Evidence Data

Submit evidence to the client for weather risk settlement type construction.

We would like to introduce the implementation results of the small wave height observation device "Digi-Jellyfish." It has been installed in locations strongly affected by seasonal winds and where there is a discrepancy between the wave heights reported by Nowcast and the actual site conditions. The utilization coefficient did not match the actual situation, and there were many days when work could not be carried out due to severe weather. Therefore, we introduced "Digi-Jellyfish" to submit the data observed with it as evidence to the construction client. With the introduction of Digi-Jellyfish, we were able to present evidence to the client showing the discrepancy between the local wave heights and those reported by Nowcast.

  • Other safety equipment
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Digital Jellyfish Case Study] Established unique wave height work standards and presented them to the client.

[Digital Jellyfish Case Study] Established unique wave height work standards and presented them to the client.

Observing wave heights in the site waters and presenting them to the client as evidence for the trial construction project with weather risk settlement.

We would like to introduce a case study of the small wave height observation device, "Digi-Jellyfish." The work takes place in an area that is easily affected by waves and swells flowing in between two offshore breakwaters. There are many days when work is difficult due to wave conditions, and to help the client understand this fact, we introduced "Digi-Jellyfish." The data from the offshore Naufas was not trusted due to low wave height values, so we installed "Digi-Jellyfish" at the work site. We independently analyzed the wave height observation data, established work standard values, and submitted a design change request to the client with the results as evidence, which was successfully accepted.

  • Other environmental analysis equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【ZEROSAI Case Study】 Prefectural Order Construction Work Strong Winds Typhoon

【ZEROSAI Case Study】 Prefectural Order Construction Work Strong Winds Typhoon

Construction work near the coast affected by strong winds: Proposal for technology to prevent material scattering, creativity and ingenuity.

Due to the proximity of the sea and the lack of obstructions, we utilized 【ZEROSAI】 to implement measures against strong winds during crane operations. 【Operating Environment】 In this site, located along the coast, strong winds frequently exceed 10 m/s two to three times a day. There is a rule that crane operations must absolutely stop when wind speeds exceed 10 m/s. We installed the 【N Sensor】 near the site office to manage rainfall and wind speed, which helped in safety measures and project management. 【Purpose of Implementation】 〇 To make decisions on stopping crane operations by monitoring real-time wind speeds, as well as to make project decisions based on weather forecasts. 〇 When performing concrete pouring or painting work, operations cannot proceed if it rains, so timely weather information through predictions and observations is essential for project management and determining work feasibility.

  • Wind Speed/Volume Meter
  • Temperature and humidity measuring instruments
  • Data Logger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example of Technical Proposal Utilization: Construction Work for ○○ Drainage Pumping Station

Example of Technical Proposal Utilization: Construction Work for ○○ Drainage Pumping Station

Prevent contact accidents with cranes and sheet piles caused by the scattering of materials due to strong winds and the swaying of barges due to waves.

■On-site Issues: Points of Focus in Evaluation (Example) "This construction involves the installation of sheet piles using a crane-equipped barge. It is necessary to prevent accidents involving the crane and sheet piles due to material scattering from strong winds and the swaying of the barge caused by waves during the construction period."

  • Other environmental analysis equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example of ZEROSAI Implementation] Wind Protection Measures During Crane Operations in Construction Work

[Example of ZEROSAI Implementation] Wind Protection Measures During Crane Operations in Construction Work

Utilize pinpoint forecasts on-site to avoid the dangers of sudden heavy rain! Achieve weather digital transformation using ICT!

We will introduce examples of the implementation of the natural disaster prevention system ZEROSAI (registration number QS-150021-VE) in civil engineering and construction work in the construction industry. It can be utilized not only for safety measures but also for creative ideas and technical proposals. Challenges on site: Key points of evaluation [Operational Environment] - Install the N sensor near the site office to manage rainfall and wind speed. - Use real-time wind speed values observed by the N sensor to make decisions on stopping crane operations. - Issue a work stoppage directive when the real-time rainfall observed by the N sensor exceeds the threshold value. [Purpose of Implementation] - Due to the proximity to the sea and the lack of obstructions, the wind speed often exceeds the work stoppage threshold of 10 m/s two to three times a day. It is essential to understand wind conditions because there is a rule that crane operations must absolutely stop when the wind speed reaches 10 m/s or more. - When performing concrete pouring or painting work, operations cannot proceed if it rains, so it is crucial to predict, observe, and timely grasp the situation regarding rainfall.

  • Data Logger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Compass PLUS Implementation Case] Airport Port Development Bureau Caisson Installation Work

[Compass PLUS Implementation Case] Airport Port Development Bureau Caisson Installation Work

Utilizing new features and combining them with wind speed forecasts, we continuously monitor real-time observation values. Achieving the digital transformation of weather and ocean conditions using ICT!

Introducing a case study of 【Compass PLUS】 (NETIS registration number QSK-210001-VE). It can be utilized not only for safety measures but also for creative ideas and technical proposals. Challenges on-site: Key points in evaluation 【Challenges on-site】 〇 There are no obstructions, and wind speed must be strictly managed during crane operations, necessitating the installation of caissons. 〇 Due to crane operations, it is essential to grasp not only the predicted wind speed but also the observed values. 〇 When the operational standard value is exceeded, information must be shared simultaneously across the entire site.

  • Data Logger
  • Wind Speed/Volume Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Digital Jellyfish Case Study] Private Company Offshore Wind Power Construction

[Digital Jellyfish Case Study] Private Company Offshore Wind Power Construction

Observe pinpoint wave heights and make rapid decisions to halt operations! Achieve DX of weather and ocean conditions using ICT!

We will introduce a case study of the "Digi-Jellyfish" (NETIS registration number QSK-170002-VE). The data from the "Digi-Jellyfish" can be viewed alongside wave height and wind speed forecasts, as well as typhoon information, using "Compass PLUS" (NETIS registration number QSK-210001-VE). It can be utilized not only for safety measures but also for creative ideas and technical proposals. Challenges on Site: Key Points for Evaluation - There are many people involved on site, and it is necessary to grasp oceanographic information and manage processes quickly. - It is necessary to observe wave heights during cable laying and issue instructions to halt work if needed. - It is essential to understand significant wave heights across the entire work area. - Submission of documentation to the client is required. *For more details, please refer to the PDF materials or feel free to contact us.

  • Data Logger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Comprehensive Catalog "Meteorology, Hydrology, Vessels, Power Supply - Handling Products"

Comprehensive Catalog "Meteorology, Hydrology, Vessels, Power Supply - Handling Products"

We will introduce aviation weather observation systems and meteorological information collection systems for firefighting and disaster prevention.

The "Meteorological, Hydrological, Maritime, and Power Supply Products" catalog includes not only the observation of wind direction and speed, which are particularly important during takeoff and landing, but also the aggregation and processing of meteorological observations such as cloud height, visibility on the runway, temperature, humidity, rainfall, and atmospheric pressure through the "Aviation Meteorological Observation System." It also features the "Road Meteorological Observation System," which provides essential weather information for road management, including strong winds, heavy rain, snowfall, and road surface freezing. We offer comprehensive support from system proposal, design, and manufacturing to maintenance management. 【Featured Products】 ○ Public Transportation Solutions ○ Firefighting and Disaster Prevention Solutions ○ Environmental Solutions ○ Maritime Solutions, etc. For more details, please contact us or download the catalog.

  • Other information systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Profiling Sonar "MODEL 881A"

Profiling Sonar "MODEL 881A"

Ultra-compact and ultra-lightweight! For underwater measurement, scour investigation, river pier, and breakwater scour.

The "MODEL 881A" is a super compact variable frequency profiling sonar. It is capable of precisely measuring the cross-sectional shape of any space. The measurement distance can be set arbitrarily within the range of 1m to 100m, and the exploration range can be adjusted from a maximum of 360° to 0° (in increments of 0.3°). Control is done via a laptop, taking up minimal space, and data recording and editing on the hard disk is easy. 【Features】 ■ Super compact and lightweight ■ Frequency can be finely adjusted (600kHz to 1.1MHz in increments of 5kHz) ■ Easy operation with Windows-compatible software ■ Underwater measurement, scour investigation, river pier, and breakwater scour *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tipping Bucket Rain Gauge '34T-BP'

Tipping Bucket Rain Gauge '34T-BP'

Excellent durability, perfect for stable observations! High-performance tipping bucket rain gauge.

The "34T-BP" is a high-precision tipping bucket rain gauge. It uses a non-contact reed switch for the contact part, eliminating concerns about mechanical failures such as wear resistance and clogging from debris. We also offer a version with a built-in heater for freeze prevention, suitable for cold climates (rain gauge 34T-HT-BP). 【Features】 ■ Highly reliable tipping bucket rain gauge ■ Capable of stable rainfall observation over long periods ■ Durability and environmental resistance *For more details, please refer to the catalog or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wind direction and speed logger 'FieldMark-FTJ500'

Wind direction and speed logger 'FieldMark-FTJ500'

The measuring device is stored in a waterproof case! You can choose between a standalone type and a network type!

This product is a set that includes the airplane-shaped anemometer "FTJ500" and a measuring instrument (data logger). The power supply can be selected from solar cell specifications or AC100V specifications. The measuring instrument is housed in a waterproof case, so by simply installing the sensor, waterproof case, and solar panel (only for solar cell specifications) on-site, measurement data will be recorded in the internal memory of the data logger. Additionally, in addition to the standalone type, a network (LTE or Wi-Fi) type can be selected. 【Features】 ■ Records wind speed and direction data ■ Low power consumption and high reliability ■ Power supply: selectable from solar cell specifications or AC100V specifications ■ The measuring instrument is housed in a waterproof case *For more details, please refer to the PDF document or feel free to contact us.

  • Wind Speed/Volume Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wind Direction and Speed Record Display Device 'FTJ500+LM-WIND2'

Wind Direction and Speed Record Display Device 'FTJ500+LM-WIND2'

Display data in real-time! It also has alarm functions and RS232C/analog output capabilities!

This product is a set consisting of the wind direction and speed meter "FTJ500" and the display unit "LM-WIND2." It can display wind direction and speed data in real-time while recording it to an SD card. It also features an alarm function for wind speed values and RS232C/analog output capabilities. The wind direction is displayed as a dot representation using LEDs for 16 directions, and the wind speed can be switched between average wind speed and instantaneous/maximum instantaneous wind speed. 【Features】 ■ Real-time display of wind direction and speed values from the airplane-type wind direction and speed meter ■ Wind direction and speed data can be recorded on an SD card ■ Equipped with alarm function for wind speed values and RS232C/analog output capabilities ■ Wind direction is displayed as a dot representation using LEDs for 16 directions ■ Wind speed can be switched between average wind speed and instantaneous/maximum instantaneous wind speed *For more details, please refer to the PDF document or feel free to contact us.

  • Wind Speed/Volume Meter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Anemometer

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.