Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 71 items
Technical Data
【Product Introduction】 ■ High-Speed Programmable Attenuator MAT810 Maximum attenuation of 60dB. A multifunctional, fully-fledged programmable feature that allows for ultra-fast control of attenuation. ■ Step Attenuator MAT850 Manual adjustment in 0.1dB increments while checking the current attenuation level. 1. MAT810/850 Setting Error (f=3GHz) 2. MAT810/850 Harmonic Distortion (f=3GHz, Pin=14dBm)
Set of 4 high-performance RF attenuators
The TBAS4 RF attenuator set consists of 3dB, 6dB, 10dB, and 20dB N attenuators at 6 GHz/2W, packaged in a beech wood box.
Optical attenuators for the purpose of creating a simulated communication environment, such as testing the limits of transmission performance of devices and the error occurrence rate due to attenuation.
Attenuators are sometimes used to protect devices from saturation of the light reception amount of photodetectors when using CATV equipment with excessive output or Ethernet LAN connections over short distances. There are fixed attenuators with a set amount of attenuation and variable attenuators where the attenuation can be adjusted. By combining these, the maximum transmission performance of the equipment can be easily measured.
光アッテネータは、機器の伝送性能の限界や減衰によるエラーの発生率の試験などの疑似的な通信環境を作る目的の光減 衰器です。
このデバイスは出力の大きすぎるCATV機器や、イーサネットLAN接続を短い距離で利用する場合の受光素子の受光量の飽和から機器を守るために用いられることもあります。アッテネータは減衰量が固定のものと減衰量が設定により可変のものがあります。これらを組み合わせて、機器の最大伝送性能を容易に測定できます。
A programmable resistor attenuator that can control attenuation with 4 bits!
The characteristic impedance is 600Ω. A programmable resistive attenuator that can control the attenuation amount with 4 bits. 【Features】 ○ Attenuation control can be performed at TTL or C-MOS levels. ○ The signal circuit and control circuit are electrically isolated. ○ ATT-01 consists of an unbalanced π-type resistive attenuator (pad) with 1, 2, 4, and 8 dB, allowing for a range of 0 to 15 dB (set with hexadecimal data) in 1 dB steps. ATT-10 consists of pads with 10, 20, 40, and 40 dB, capable of attenuating up to 110 dB. ● For other functions and details, please download the catalog.
◆Single mode or multi-mode ◆4ch/8ch/16ch, standard lineup ◆Power monitor & adjustment function included
◆Supports remote control via SCPI OEM products from DICON, a long-established manufacturer of MEMS-related components *Single-mode type - Attenuation range: up to 40dB - Up to 16 channels in 1U (19-inch rack) - No dependence on protocol or bitrate - Supports remote control via SCPI *Multi-mode type - Attenuation range: up to 30dB - Up to 16 channels in 2U (19-inch rack x 2 units) - No dependence on protocol or bitrate - Supports remote control via SCPI
◆190x100x62mm/600g Handheld type ◆ Equipped with three operating modes: Absolute, Relative, Power
◆Maximum attenuation: 65dB, resolution: 0.01dB◆Supports USB-based remote control◆The most compact housing in the optical variable attenuator market◆Low-cost ownership (with a reassuring 3-year warranty) The EXFO FVA-600 features a handheld design with a maximum attenuation of 65dB and a resolution of 0.01dB. Compared to traditional benchtop models, it offers multifunctionality and low loss specifications. It also allows for verification with stored references. It supports USB-based remote control. The product comes with a reassuring 3-year warranty. Since its founding in 1985, EXFO has continued to lead the industry with highly unique product development and reliable quality, making it a leading company in optical communication measurement instruments. It holds the number one market share in the optical field product range. In recent years, it has expanded its lineup of high-performance measurement instruments for laboratories and has been quick to promote the automation of measurement devices. With a simple and highly convenient interface, it has gained support in a wide range of scenarios from laboratory use to manufacturing sites.
Custom design and manufacturing of high-frequency switch boxes, high-frequency filters, and more!
Morita Tech offers a variety of "RF solutions." We custom design and manufacture high-frequency switch boxes, high-frequency filters, and more. If you would like a detailed explanation of our products, please feel free to contact us at any time. 【Features】 ■ Providing essential high-frequency measurement solutions for module testing and finished product manufacturing lines ■ Custom design and manufacturing of high-frequency switch boxes, high-frequency filters, and more *For more details, please refer to the PDF materials or feel free to contact us. 5G FR1 FR2 28GHz band 39GHz band, Sub6GHz Wi-Fi 6 Wi-Fi 6E
It can be used with any laser wavelength and any polarization.
Spectral Optics, a division of Spectral Products, has developed and released a completely new and innovative type of high-power laser application, a broadband variable beam splitter/attenuator (VBSA). The VBSA can vary the reflection/transmission (R/T) split ratio over a very wide range of wavelengths from infrared to ultraviolet, specifically from 10.6 µm to 193 nm. The innovative VBSA is available in both uncoated and AR-coated versions and can be used with any laser wavelength and any polarization. The Spectral Optics high-power variable beam splitter/attenuator (VBSA) includes uncoated products for use in extreme high-power laser applications at both the input and output apertures. Due to the innovative new design of the VBSA, the uncoated version can be used up to the bulk laser damage threshold of the internal substrate material. As a result, this very high damage threshold makes it a unique product that can be used for almost all high-power lasers operating from FIR wavelengths to UV.
Low distortion modulation, independent 3 channels, 100W
CMIAT400M3GA153CH has announced an attenuator with low PIM (intermodulation distortion). It operates from 400 to 3000 MHz, with an attenuation of 15 dB, 3 channels, a maximum input of 100 WCW, and PIM of 160 dBc at 1850 MHz. It is intended for measuring wireless communication infrastructure such as DAS and 4G mobile networks. *For more details, please refer to the PDF document or feel free to contact us.*
Expanding our product line to continue meeting customer needs! We deliver high-quality products to customers around the world!
RF ONE is an ISO9001 certified supplier of high-quality RF, microwave, millimeter-wave components, and cable assemblies. Since 2002, we have grown from designing and manufacturing RF attenuators, terminations, and other passive components, continuously expanding our product line to meet customer needs. Our products are widely used in commercial, industrial, and military applications, including wireless, satellite, defense, and test and measurement. Our products cover a frequency range of DC to 67GHz, with a VSWR of 1.45. *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.
Since 2002, we have grown from the design and manufacturing of RF attenuators, terminators, and other passive components!
RF ONE is an ISO9001 certified supplier of high-quality RF, microwave, and millimeter-wave components and cable assemblies. The company's products are widely used in commercial, industrial, and military applications, including wireless, satellite, defense, and test and measurement. Our products operate at frequencies from DC to 67GHz, with a CW power of 13W and an attenuation connector of 1.85mm. *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.
Coming soon.
Excellent frequency characteristics for DC~30 GHz.
Standard, compact, high power, and more! A variety of types are lined up.
We would like to introduce the "Eravant Attenuators" that we handle. The "STA Series" offers a variety of types, including standard types, compact types, high-power types, and coaxial programmable types. In addition, we also have the "SKA Series" and "SCA Series." Please feel free to contact us if you have any inquiries. 【Product Lineup (Partial)】 ■STA Series - Standard: Standard WG Fixed Attenuators - Compact: Compact WG Fixed Attenuators - High Power: High Power WG Fixed Attenuators - Coaxial Programmable: Coaxial Programmable Attenuators - Level Setting: Level Setting Attenuators - Programmable/Direct Reading: Programmable/Direct Reading Attenuators *For more details, please refer to the related links or feel free to contact us.
The supported frequency range is up to 110GHz! We offer types such as waveguide type and coaxial type.
We would like to introduce the "Cernex Attenuator" that we handle. We offer various types, including waveguide types such as "CDA type," "CFA type," and "CSA type." Additionally, we also have coaxial types such as the "CAD series," "CFA series," and "CSA series." Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 <Waveguide Type> ■ CDA Series: Direct-Reading Precision Attenuators ■ CFA Series: Fixed Setting Attenuators ■ CSA Series: Variable Attenuators ■ CMC Series: Micrometer-Driven Calibrated Attenuators ■ CPD Series: Pin Diode Attenuators ■ CRV Series: Programmable Rotary Vane Attenuators *For more details, please refer to the related links or feel free to contact us.
