Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 69 items
VME-J1 backplane
【Features】 ● VME backplane compliant with IEEE1014(Rev.C.1) ● Slot variations available: 3, 4, 5, 8, 10, 12, and 20 slots ● 4-layer multilayer board with a thickness of 3.2mm ● Auto-daisy chain specification also available
Other handling backplanes
【Features】 ● The a and c columns of the Motorola I/O channel backplane (5, 8, 10, 12, 20 slots) connectors are compatible with Motorola I/O channel bus, while the b column is 32-bit extended. ● The a and c columns of the universal backplane (5, 8, 10, 12, 20 slots) connectors feature bus-type wiring, and the b column is 32-bit extended. ● Custom specification backplanes are also available. For more details, please contact us.
Compact PCI Backplane 6U 8 Slots
【Features】 ● Hot-swappable ● 154 pins, 2mm short back pins ● Capable of supplying high power ● Advanced materials ● Clear wiring for power and GND ● Rust-resistant finish For more details, please contact us.
Compact PCI Backplane 3U 8 Slots
【Features】 ● Hot-swappable ● 154 pins, 2mm short back pins ● Capable of supplying high power ● Advanced materials ● Clear wiring for power and GND ● Rust-resistant finish For more details, please contact us.
Backplane
Backplane for VME, VME64x, and CompactPCI specifications ● A high-quality backplane that supports a wide range of specifications from standard to custom. ● You can choose from VME, VME64x, CompactPCI specifications, and the number of slots, etc.
PICMG 2.0 R3.0 compliant backplane with power slot, CPCI P series
This is a backplane compliant with the PICMG 2.11 R1.0 specification. The board size is 6U type, and the system slot is of the right-side type. There are 8 slots. It is a backplane equipped with a connector for slot-in power supply.
PICMG 2.0 R3.0 compliant backplane VA type (3S/4S/5S/6S/8S) CPCI R3.0 VA series
This is a backplane compatible with PICMG 2.0 R3.0. It is a 3U type (with a physical minimum width), and the system slot position is on the right side. The power supply features our proprietary screw terminal. (It is also possible to use an ATX power connector. *Fully implemented product.)
CPCI PSB Series Packet Switching Backplane Compatible with PICMG 2.16 R1.0
This is a packet-switching backplane compliant with the PICMG2.16R1.0 specification. The wiring configuration is of the dual type, and the system slot position is of the right-side type. There are 8 slots. It is equipped with connectors for slot-in power supply.
Backplane for CPCI T series equipped with PICMG2.0R2.1 compliant termination board.
This is a backplane for termination implementation compliant with the PICMG 2.0 R2.1 standard. The board size is 3U type, and it has 8 slots. There are two types of system slots: right-side type and left-side type.
VME Bus Compatible Backplane J1 Type VME J1 Series
This is a J2 type backplane compliant with the VMEbus Rev.C standard. We offer eight types ranging from 3 to 21 slots. It features our proprietary screw terminals, with column B wired for 32-bit expansion, while columns A and C are open.
PICMG 2.0 R3.0 compliant backplane (5S) CPCI R3.0 series
This is a backplane for PICMG2.0R3.0. It is available in 3U and 6U types, with the system slot on the right side. There are 5 slots available. The power supply features an ATX power supply connector and our proprietary screw terminal.
PICMG 2.0 R3.0 compliant backplane VA type (8S) CPCI R3.0 VA series
This is a VA type backplane of PICMG2.0R3.0. The system slot is only of the right-side type. There are 8 slots. Power supply options include two types: screw terminal specification and ATX specification, as well as two types with only ATX specification. The design eliminates waste and focuses solely on the essential minimum functions.
Backplane for slot-in power supply compatible with PICMG2.11R1.0 (6U vertical 2S) CPCI P series
This is a backplane compatible with PICMG2.11R1.0. It is possible to vertically arrange two 3U-sized slot-in power supplies for parallel operation. The power input/output features our proprietary screw terminals.
Backplane for Slot-in Power Supply compatible with PICMG2.11R1.0, Module Type, CPCI P Series
This is a backplane compliant with the PICMG2.11R1.0 and PICMG2.9R1.0 standards. It is a module type compatible with slot-in power supplies and is equipped with connectors for ATX power supplies, supporting our product CPCI-PS-02-F.
PICMG 2.16 R1.0 Standard Backplane
This is a 7U, 7-slot CPCI/PSB bus backplane compliant with the PICMG2.16 R1.0 specification. Pl and P2 are designed according to the 64-bit bus wiring specifications of the PICMG2.0 R3.0 standard, with a single-ended impedance (Zo) set to 65Ω ±10%. P3 is configured for dual fabric board support (NodeLink a, b) with Ethernet bus wiring specifications, and the differential impedance (Zdiff) is set to 100Ω ±10%.
PICMG 2.20 R1.0 Standard Backplane
The PICMG 2.20 standard (Serial Mesh Bus) adds a serial mesh fabric with full mesh bus connections to the CPCI platform, providing a bus standard that supports data communication between various protocols. The P4 area employs a ZD connector (high-speed differential connector), enabling a transfer rate of 2.5 Gbps through strict differential impedance control of the backplane and the SERDES drivers specified as fabric interfaces between module boards. The backplane is configured with 11 slots (CPCI bus), and the serial mesh bus (P4) supports 8 slots (slots 4 to 11) with 8 channels × 2 ports (Smaller Replicated Mesh specification).
Development around backplanes and industrial electronic equipment bodies - from development to mass production.
CompactPCI is a next-generation industrial computer standard bus specification standardized by PICMG.
Radar, sonar, and other next-generation standards that can withstand harsh environments in aerospace and defense fields! Achieving environmental resistance and high reliability!
Eblen supports the simulation and design of customized backplanes compliant with various open bus standards from the design phase. We support the following standard products: ○ Compact PCI (PICMG) ○ Compact PCI Plus I/O (PICMG) ○ Compact PCI Express (PICMG) ○ PXI (PICMG) ○ Advanced TCA (PICMG) ○ Micro TCA (PICMG) ○ VME (ANSI/IEEE 1014-1987) ○ VME64Ex (ANSI/VITA 1.1) ○ VXS (ANSI/VITA 41.0) ○ VPX (ANSI/VITA 46.0) ○ For more details, please contact us.
Series compliant with PICMG EXP R1.0 specifications.
This is a Compact-PCI Express backplane with 4 slots / 9 slots and a Compact-PCI Express bridge board compliant with the PICMG EXP R1.0 specification. The slot configuration for the "backplane (4 slots)" consists of 4 slots: 1 system slot, 1 Type 1 peripheral slot, and 2 Type 2 peripheral slots. The "backplane (9 slots)" allows for a bus bridge between the CPCI Express bus and the CPCI bus when combined with the "bridge board." For more details, please contact us or refer to the catalog.
High-speed interface bus specified by the PICMG open bus standard.
The CompactPCI Serial "backplane" is compliant with the PICMG CPCI-S.O standard and features a 3U x 9 slot configuration. Additionally, PICMG CPCI-S.O is the latest PICMG open bus standard that assigns various high-speed interface buses. Other supported interfaces include management interface buses, power control buses, and platform buses. ● For more details, please download the catalog.
14-slot [PCI (10)] Active PICMG Backplane
14-slot rack mount chassis for PICMG 1.0 SBC active backplane
8 slots [PCIe x8 (1, x4 signals), PCIe x16 (2, x8 signals), PCI (4)] PICMG 1.3 backplane
8-slot PICMG 1.3 SBC backplane for node chassis
6 slots [PCIe x16 (2, x8 signals), PCI-X (2), PCI (1)] PICMG 1.3 backplane
6-slot PICMG 1.3 SBC backplane for node chassis
6 slots [PCIex8 (1, x4 signal), PCIex16 (2, x8 signal), PCI (2)] PICMG 1.3 backplane
6-slot node chassis PICMG 1.3 SBC backplane
5 slots [PCI-E x16 (1), PCI-X (2), PCI (1)] PICMG 1.3 backplane
6-slot node chassis PICMG 1.3 SBC backplane
13 slots [PCIex16(1), PCIex16(2), PCIex4(5), PCI(4)] PICMG 1.3 backplane
13-slot rack mount chassis for PICMG 1.3 SBC backplane
12 slots [PCI-Ex16(1), PCI-Ex8(1, x4 signal), PCI(9)] PICMG 1.3 backplane
12-slot rack mount chassis for PICMG 1.3 SBC backplane
Vertical 6-slot [PCI-E x1 (4), PCI-E x16 (1)] PICMG 1.3 backplane
6-slot rack mount chassis for PICMG 1.3 SBC backplane
Vertical 6 slots [PCI-E x4 (1), PCI-E x16 (1), PCI (3)] PICMG 1.3 backplane
6-slot rack mount chassis PICMG 1.3 SBC backplane
6 slots [PCI-E x16 (1), PCI-E x4 (1), PCI (3)] PICMG 1.3 backplane
6-slot Node Chassis PICMG 1.3 SBC Backplane
