CAD(3d) - List of Manufacturers, Suppliers, Companies and Products

Realizing parallel examination of mechanics and control! 3D CAD suitable for automotive equipment design.

Achieving front-loading in automotive equipment development, including control and robot verification! Ultra-fast response 3D CAD that smoothly handles large-scale data.

In the automotive industry, there is a demand for the rapid market introduction of new vehicles, which requires the development of automotive production equipment with short delivery times and high quality. Additionally, not only mechanical design but also PLC simulation of equipment and welding robot simulation are becoming more complex, leading to the use of simulators for pre-validation. However, general simulation software requires the conversion of 3D CAD data, necessitating the reconfiguration of mechanisms and IO information with each design change. This makes it difficult to conduct parallel considerations in line with design progress, and many customers may have given up on this approach. To solve this issue, it is important to achieve control debugging and robot simulation directly on the 3D CAD platform. iCAD SX offers ultra-fast response by processing 3 million parts in 0.2 seconds, allowing it to handle vast amounts of data, including the operation and control information of large-scale models, and enables control debugging and robot simulation directly on the 3D CAD. This facilitates an earlier start to control design, shortening the equipment development period and achieving front-loading. ▶ A special site is currently showcasing limited case studies! 　　 ↓↓↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presentation of case studies. What is the 3D CAD required for the design of material handling and transportation equipment?

3D CAD that achieves a reduction in lead time for transportation equipment development! Realizing ultra-fast response capable of handling 3 million parts in 0.2 seconds.

In the design of conveying equipment, the requirements vary for each customer due to factors such as the conveyed items and factory layout, necessitating a unique and quick turnaround design for each case. To achieve a vertical startup of the equipment, it is crucial to extract detailed customer requirements at an early stage of specification discussions and to help them quickly understand the structure and operability of the equipment. For mechanical designers, the 3D CAD iCAD SX achieves high-speed response, handling 3 million parts in 0.2 seconds. You can manage the entire conveying equipment, including material handling devices like conveyors and AGVs, on 3D CAD without stress. Since the movements of the machinery can be simulated in advance for the entire system, there is no worry about damaging the machinery or causing harm to people. This leads to improved design quality and reduced development lead times. ＼＼Customer case studies that have realized manufacturing DX are exclusively available on the 【special site】／／　　　　　　　　　　　　　　　　　　　 ^^^^^^^^^^^^^ ▶ Click on the special site to download the case studies now! 　↓↓↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is 3D CAD that realizes shorter delivery times and higher quality for machine tools and processing machines?

Reduce rework in the later stages! 3D CAD that can detect and correct issues during the design phase.

Currently, in the market for machine tools and processing machines, there is an increasing demand for high-quality products with short delivery times. Instead of repeatedly prototyping to ensure quality, it is important to identify and correct issues during the design phase to reduce rework. iCAD achieves high-speed response capable of handling 3 million parts in 0.2 seconds. Even with large machine tools, it can manage the entire assembly on 3D CAD, allowing for the accumulation and utilization of various information, including movement and electrical/control data. For example, confirming movements using device models and utilizing electrical circuit diagrams for automatic wiring routing make it possible to conduct considerations that were previously done on actual machines during the design phase. This prevents damage to actual machines due to dynamic interference and increases in man-hours due to on-site wiring path adjustments, enabling the production of high-quality machines with short delivery times. ＼ Customer case studies are exclusively available on the <Special Site>! ／　▶ Click on the Special Site and download now! 　　↓↓↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Manufacturer Case Studies Available] 3D CAD Required for Press Machine Design

Improving design quality through operational considerations of the press machine and entire conveying equipment in 3DCAD.

In the design of press machines, it is essential to efficiently carry out work processing and transportation to each stage. Therefore, it is important to deepen the consideration of "movement" in addition to the structure and configuration of the press machine from the conceptual design stage. However, when progressing with design in 3D CAD, the following problems arise, and it is often reported that the consideration of "movement" is abandoned: - The 3D model becomes heavy, making it difficult to apply movement. - It takes time to convert for simulation. The cause of this is that data becomes heavy due to the history and constraints of general 3D CAD. With iCAD SX, the examination of the device's operation and the confirmation of related interferences can be performed with a single tool. This feature, along with ultra-fast response, allows for the design to progress while experimenting with the device's movements. Furthermore, based on the set movements and the ladder program created by the control designer, the verification of the control program can be conducted on the 3D CAD. By integrating mechanics and control, it is possible to shorten development lead times and improve design quality. ▶ Click on the special site and download the <Case Studies> now! 　　↓↓↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the 3D CAD required for semiconductor manufacturing equipment design?

3D CAD that achieves a reduction in lead time for semiconductor equipment development! Realizing ultra-fast response handling of 3 million parts in 0.2 seconds.

In recent years, the development of semiconductor manufacturing equipment has seen a tremendous increase in the number of components due to the complexity of the required functions. Therefore, the biggest challenge is how to efficiently arrange various mechanical devices within a limited space. 'iCAD SX V8' is a domestically developed 3D CAD specialized for mechanical design, created to support Japanese manufacturing. iCAD achieves high-speed response, handling 3 million components in 0.2 seconds, allowing for stress-free design consideration and verification of the entire semiconductor manufacturing equipment, which can involve tens of thousands of parts. Leveraging its ability to handle vast amounts of information, it is possible to accumulate and utilize design information necessary for equipment development, including piping, wiring, and control (movement), all within a single CAD data file. This data can be used across various scenarios and departments, from design to manufacturing, assembly, and maintenance. *Case studies from semiconductor manufacturing equipment manufacturers are currently available for limited viewing on a special website. Please click the link below to download.

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Presentation] Reduced design time by 30%! 3D CAD suitable for plant design.

Revolutionizing design operations with 3DCAD has drastically reduced design rework! Achieving ultra-fast responses for piping considerations across the entire factory.

In plant design, it is necessary to consider the space for piping routes, workability, and maintainability based on the customer's industry, factory layout, and other factors. Therefore, a unique and short-term design is required. To meet the high demands of customers, it is important to conduct preliminary verification of the entire plant, including surrounding equipment and work areas, rather than just focusing on the piping alone. This helps to reduce rework that may occur during the on-site startup. iCAD SX achieves high-speed response, handling 3 million parts in 0.2 seconds. Not only can you manage mechanical equipment, but you can also handle the entire factory, including plant piping, on 3D CAD without stress. Since you can consider the space for piping routes, workability, and maintainability during the design phase, it allows for the identification and resolution of issues and mistakes during the review process. Additionally, by conducting specification meetings using a three-dimensional model, you can improve communication with customers. This leads to enhanced design quality and reduced development lead times. ◎ Customer case studies are currently available for limited viewing on a special site! ▶ Click on the special site and download now! 　　↓↓↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Presentation of Materials] How to Transition to 3D Design [Supervised by the Developer]

Explaining how to move beyond partial use of 3D CAD and apply three-dimensional design to business operations.

Click the black button [Download Catalog] to get it now. While many companies understand the benefits of 3D design, they seem unable to transition, using 3DCAD only for analysis and presentations. This document is supervised by the developer of the 3D CAD "iCAD SX" for mechanical design. It explains methods for promoting 3D design and how to utilize 3D in digital transformation for those who are starting 3D design or have repeatedly failed to launch it. 【Do you have any of these concerns?】 ■ Appointed as a promoter but unsure of what to do ■ Only one person is doing 3D design, causing communication issues within the department ■ Transitioned to 3D design on my own, but unsure of its effectiveness → Here are the solutions to the above issues. ＼PR: Get success stories of 3D promotion right now! No registration required for Ipros members／ ↓ ↓ ↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Logistics Equipment】Optimizing Warehouse Layout with 3D CAD

3 million parts in just 0.2 seconds! Simulating warehouse layout with 3D CAD.

In the logistics industry, efficient warehouse operation is a challenge. There are various issues such as labor shortages, effective use of space, and safety in operations. iCAD SX is a 3D CAD that achieves high-speed response, handling 3 million parts in 0.2 seconds. It simulates warehouse layouts in three dimensions and supports optimal design. 【Usage Scenarios】 * Layout design of logistics warehouses * Consideration of introducing transport robots and AGVs * Optimization of work flow and space * Improvement of safety within the warehouse * Overall efficiency of the warehouse 【Effects of Implementation】 By utilizing iCAD SX, optimization of warehouse layouts can be achieved, leading to the following expected effects: * Improved work efficiency through reduced transport distances * Reduction of warehouse area through effective use of space * Resolution of labor shortages through the introduction of transport robots and AGVs * Enhanced safety in operations * Cost reduction through overall efficiency of the warehouse

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presentation of Materials: 3D Concept for Visualizing Mechanical Movements

Visualizing complex equipment specifications! Introducing the use of 3D CAD to contribute to increased order rates and reduced rework. 【*Free explanatory materials available!】

The developer of the 3D CAD "iCAD SX" for mechanical design has supervised this. We have identified the reasons and issues that make it difficult to align the specifications of increasingly complex equipment, and we are currently offering a free document that explains "visualization of equipment specifications (movements)." 【Document Overview】 ■ The environment surrounding the manufacturing industry and the complexity of equipment ■ Efforts and challenges during specification explanations, and the desired outcomes ■ The benefits of visualizing a series of operational flows from the early stages of meetings * Please obtain it from the PDF download on this page. For a limited time, we are offering free access to case study videos (until May 7, 2024). You can see examples of "visualization of movements" by designers of labor-saving equipment manufacturers. We are also providing the PDF used in the videos via the viewing URL. 【Case Study Videos】 ■ Efforts to improve reliability and control collaboration in dedicated machines through 3D utilization Ibiden Engineering Co., Ltd. Precision Machinery Division, Mechanical Technology Team, Team Leader Masahiro Asai Precision Machinery Division, Mechanical Technology Team, Naoki Takano * Click the blue text below for more details ↓

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerospace Equipment 3DCAD 'iCAD SX'

3 million parts processed in 0.2 seconds! Accelerating aerospace design.

Introducing the specialized 3D CAD software 'iCAD SX' for mechanical design, which addresses the challenges of complex design, massive data management, and shortened development periods in the aerospace sector. 【Usage Scenarios】 - Design of aircraft, spacecraft, satellites, etc. - Design involving complex structures, precision parts, and numerous components - Sharing, managing, and utilizing design data - Shortening development periods and improving design quality 【Benefits of Implementation】 'iCAD SX' streamlines design operations in the aerospace field, achieving shortened development periods and improved design quality. - Facilitates smooth sharing and management of design data, enhancing collaboration across the entire team - Simplifies the design of complex structures, reducing design errors - Improves efficiency in manufacturing, assembly, and maintenance through the use of 3D data

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CAD(3d) - List of Manufacturers, Suppliers, Companies and Products

CAD Product List

Realizing parallel examination of mechanics and control! 3D CAD suitable for automotive equipment design.

Presentation of case studies. What is the 3D CAD required for the design of material handling and transportation equipment?

What is 3D CAD that realizes shorter delivery times and higher quality for machine tools and processing machines?

[Manufacturer Case Studies Available] 3D CAD Required for Press Machine Design

What is the 3D CAD required for semiconductor manufacturing equipment design?

[Case Presentation] Reduced design time by 30%! 3D CAD suitable for plant design.

[Presentation of Materials] How to Transition to 3D Design [Supervised by the Developer]

【Logistics Equipment】Optimizing Warehouse Layout with 3D CAD

Presentation of Materials: 3D Concept for Visualizing Mechanical Movements

Aerospace Equipment 3DCAD 'iCAD SX'

Search Keywords Related to CAD