Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
691～720 item / All 883 items
It helps with the use of soft hose parts for automobiles.
Designed for use in the automotive sector, it is utilized in various situations for leak prevention and improved sealing, such as with soft hoses.
Aluminum bulkhead clamp and wall clamp.
The "Bulkhead Clamp / Wall Clamp" is made of AL material. The "Wall Clamp" comes with an M6 bolt and washer (made of SS material). It is compatible with standards NW16 to 50. 【Features】 ■ Material: AL ■ Comes with M6 bolt and washer (made of SS material) (Wall Clamp) For more details, please refer to the catalog or feel free to contact us.
Wide gripping width for hanging various blocks! Compatible with gripping widths from 150 to 550 mm.
The "Block Vice FF Type" is a concrete clamp that can be used for both manual and machine operations, designed to handle pedestrian and boundary blocks as well as tombstones. The shackle position can be adjusted according to the gripping width, allowing for smooth operation without strain on the lifting equipment. Additionally, four reinforced rubber narrow contact plates on each side, totaling eight, work uniquely to grip firmly, eliminating concerns about falling, cracking, or scratching. 【Specifications】 ■ Rated capacity: 300kg ■ Weight: 20kg ■ Gripping width: 150–550mm ■ Adjustment holes: 4 ■ Shackle hole positions: 2 *For more details, please refer to the PDF document or feel free to contact us.
[Report Presentation] This explains the necessary single pipe clamps for assembling highly flexible scaffolding. 2023/11/24
If the type of scaffolding is a frame scaffolding, it can be assembled without using tools, as long as the specified materials are prepared. In the case of wedge-type scaffolding, the protrusions called "wedges" at both ends of the beam pipes are fitted into the "jacks" of the building site and are driven in with a hammer to secure the assembly. Both types of scaffolding are widely used at many construction sites because they can be easily assembled and disassembled. However, frame scaffolding and wedge-type scaffolding have standardized dimensions and are not suitable for use on complex-shaped land or in narrow spaces. When constructing scaffolding with a high degree of freedom, single-pipe scaffolding is used. Single-pipe scaffolding allows for a high degree of flexibility by using a ratchet wrench or impact wrench to combine single-pipe tubes and single-pipe clamps. Therefore, this time, we will explain the single-pipe clamps necessary for constructing scaffolding with a high degree of freedom. *For more details, please download the PDF document.
Eliminate the hassle of bending processing! It has high insulation properties and is resistant to gasoline and diesel.
The "Nylon Clamp" is molded into a circular shape, eliminating the need for bending processing. It complies with the RoHS directive. The color available is natural (milky white). It is made of durable nylon, has high insulation properties, and is resistant to gasoline and diesel. We offer a wide range of packaging units, including "NK-2N" in a unit of 100, "NK-18N" in a unit of 50, and "NK-32N" in a unit of 25. 【Features】 ■ Molded into a circular shape, eliminating the need for bending processing ■ Made of durable nylon with high insulation properties ■ Resistant to gasoline and diesel ■ Complies with the RoHS directive ■ Color available is natural (milky white) *For more details, please refer to the PDF document or feel free to contact us.
RoHS directive compliant! The flexible arm structure allows for easy one-touch attachment and detachment without applying force.
The "Push-Type Wiring Clamp" is a clamp that allows for easy attachment and detachment with one touch, without applying force, thanks to its flexible arm structure. It complies with the RoHS directive. We offer a wide range of products, including the "RMS series," "RLMS series," "RLWC series," and many others. 【Features】 ■ Easy one-touch attachment and detachment without applying force, thanks to the flexible arm structure ■ Extensive lineup ■ Complies with the RoHS directive *For more details, please refer to the PDF document or feel free to contact us.
A variety of colorful wiring clamps are available! Double-sided adhesive tape is of the heat-resistant type.
The "Wiring Clamp LWC/LWCN Series" comes with double-sided tape, allowing for easy attachment without the need for special processing on panels or chassis. A diverse lineup is available. The double-sided adhesive tape is of a heat-resistant type, and the release paper features an easy-to-peel dry edge processing, enhancing workability. 【Features】 ■ A diverse lineup is available ■ Double-sided adhesive tape is of a heat-resistant type ■ The release paper features an easy-to-peel dry edge processing, enhancing workability ■ Lot: 500 pieces ■ Delivery time: Approximately 45 days *For more details, please refer to the PDF document or feel free to contact us.
This is a clamp and screw support set that is convenient for clamping workpieces, with one set available for each MC1 machine.
A plain clamp and screw support are set. This is a standard clamp tool set for the basic model. The processing width is expanded. It will reduce time.
This is a clamp set for light cutting.
Includes bolts, nuts, T-nuts, clamps, and screws with receiving threads.
This is a clamp for press molds.
Strong clamping is possible. It can be used for press die holding. It can be used for holding molds and heavy objects during processing. It can be used for holding workpieces during machining and similar processes.
It is a forged U-clamp that is widely used in general.
This is a forged clamp. It is a strong and powerful clamp that will never break. Please use it for pressing molds of 100 tons and above, as well as for ordinary machining presses.
Use by setting the receiving bolt in the screw hole at the rear.
It can be used to secure the work.
You can attach and detach the clamp simply by loosening the flange nut.
Set the receiving bolt in the screw hole at the rear for use. Please use it for clamping workpieces, milling machines, machining centers, and radial drilling machines.
Since it is in a Z shape, the position of the flange nut is lowered, making the machining work advantageous.
Please use it for clamping workpieces of irregular shapes. Using it in combination with a swivel bolt will improve the efficiency of the clamping operation.
This swivel holds the workpiece securely at any angle without resistance.
Swivels are included at both ends of the clamp surface to prevent damage to the machine bed. The swivels are plated, so they won't damage the workpiece. Due to the large contact surface of the clamp, the clamping force is increased, providing stable tightening force (with tightening bolts and flange nuts included).
Please use it for clamping work.
It can be used to clamp workpieces with an incline. Fine adjustments can be made by hand during clamping.
Please use it to secure the work.
By using it in conjunction with a single cam handle, the efficiency of clamping work is improved. It can be used as a dedicated fixture.
It is ideal for lower clamps.
Please use this when type A is too low and the free vice is too high. By pressing the tip down while tightening, it prevents the workpiece from lifting. The built-in push screw is heat-treated for excellent durability. The operation is simply inserting the wrench and tightening it.
Clamp a slightly thicker board.
DGS type slide clamp. By pressing the toe (tip) downward while tightening, it prevents the workpiece from lifting. Suitable for side clamping of thin to medium-thick materials.
Please use for clamping wood, resin, and other materials like iron in medium-thin work.
The diagonal downward tightening prevents lifting. It features a serrated tip, making it ideal for black skin material. The design is suitable for both left and right forces.
It is ideal for positioning.
Using it in conjunction with the mechanical lock clamp improves the efficiency of the machining setup.
Please use it for clamping from the side, such as positioning, parallel alignment, and clamping work.
It can be inserted into the T-slot of the machine table and used for positioning, parallel alignment, clamping work, and more. It is tilted 5° lower in the clamping direction to prevent the workpiece from lifting.
Hook clamp (Type C) simplified for clamping in NC machines, etc.
It has a built-in spring, and if you loosen it, the toes will automatically rise.
Hook clamp (Type D) is a clamp for NC machines and the like.
It has a built-in spring, which improves the efficiency of clamping work.
Here is an introduction to the clamp CT.
Hirose Technical Research Institute's Clamp CT *For more details, please download the materials or contact us directly. 【Industries Actively Hiring】 ■ Power Industry (Thermal Power Plants, Nuclear Power Plants) ■ Chemical Industry (Chemical Plants, Manufacturing, etc.) ■ Electrical Manufacturing Industry ■ Automotive Industry, Machinery, Heavy Industry
【GF Machining Solutions System 3R】Automation using 3R high-precision chucks! Reducing setup time and improving productivity!
The "5-axis machining compatible clamp system" provides a chuck that can be positioned and fixed with a single touch on a machine index table. The machining area is perfectly secured, reducing setup time and expanding flexibility, allowing for external setup. It minimizes issues such as interference and enables pre-checks. As a result, new machines will be added that allow for manual and automatic workpiece exchanges. 【Features】 ■ Increases operating time by up to 90% through reduced setup time ■ Allows for setup outside the machine (external setup) and measurements during processing (after) ■ Standardization of the clamp system and sharing of jigs ■ Clamping methods with minimal tool interference and pre-confirmation ■ Unmanned production through automation ■ Upgrades existing machines by setting up 3R chucks to modernize them *For more details, please refer to the PDF document or feel free to contact us.
Complexly shaped tools can also be easily secured with a three-pronged method! It helps prevent accidents such as breakage!
This product is a clamp made of stainless steel, designed to minimize corrosive rust and other issues that may arise from the surrounding environment, allowing screws to turn smoothly and making it easy to attach and detach devices and equipment. 【Features】 ■ NC type design ■ Excellent corrosion resistance ■ Custom sizes can be freely manufactured *For more details, please refer to the catalog or feel free to contact us.
With a robust swing pivot mechanism, high rigidity, long lifespan, and high precision! A compact swing clamp in the world's smallest class.
The "WHC" is an air swing clamp that can be used in coolant environments. It features a robust swing mechanism with three steel balls and a gothic arch-shaped lead groove. It achieves high speed and long life (internal operational tests conducted for 2 million cycles). Additionally, the repeat accuracy of the lock swing completion position is ±0.5°, and the swing angle accuracy is 90±3°. 【Features】 ■ Robust swing rotation mechanism ■ Compact body ■ Suitable for creating environmentally friendly equipment with long life ■ Repeat accuracy of lock swing completion position ±0.5° ■ Swing angle accuracy 90±3° *For more details, please refer to the PDF document or feel free to contact us.
A comprehensive manufacturer specializing in the welding and processing of stainless steel materials! We can handle everything from concept to design and installation of vacuum equipment.
We manufacture and sell SUS products, including 'flange products' conforming to JIS, ANSI, DIN, and international standards, 'clamp fittings' that have high sealing performance and excellent maintenance properties, and can be selected according to usage pressure and applications, as well as 'vacuum chambers' for vacuum equipment. By standardizing the manufacturing process, we achieve cost reduction and shorter delivery times, and we can also accommodate requests for special dimensions and shape processing. Additionally, we can handle everything from concept to design and installation for vacuum equipment. 【Products Offered】 * Consultations are available for small lots ■ Flange products ■ Clamp fittings (TS clamp) ■ Vacuum chambers ■ Burring processed pipes ■ Prefabricated piping, etc. * For more details, please download the PDF or contact us directly.
