We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Coating.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Coating×関西ポリマー - List of Manufacturers, Suppliers, Companies and Products

Coating Product List

1～15 item / All 16 items

Displayed results
Bridge fluororesin coating

Bridge fluororesin coating

A revolutionary coating that exhibits strong wear resistance without compromising the non-stick, slippery, and chemical resistance properties of fluoropolymer coatings.

Crosslinking refers to the process of bonding molecules that were previously independent, akin to building a bridge between them. There are various methods for this, including radiation exposure, the addition of crosslinking agents, and chemical crosslinking. Epoxy resins, which harden when two liquids are mixed, also undergo this reaction. "Crosslinked fluoropolymer" utilizes this reaction, and due to its stable molecular structure, it exhibits remarkable wear resistance. By blending it, the wear resistance shows values approximately 3 to 5 times greater compared to conventional PFA resins. 【Features】 ■ Ultra wear resistance not found in previous fluoropolymers ■ Excellent properties similar to fluoropolymers ■ The unevenness of the coating reduces the contact area, enhancing non-stick and slip performance ■ Complies with food sanitation laws *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inorganic ultra non-stick coating 'KP-10F-2'

Inorganic ultra non-stick coating 'KP-10F-2'

Achieving ultra non-stick performance! Inorganic ultra non-stick coating that prevents any adhesive from sticking.

The "KP-10F-2" is an inorganic ultra-non-stick coating system that has "Si-O bonds." This system combines a special aggregate contained in the base coat that forms a rough texture on the surface of the coating, with a top coat of highly non-stick inorganic silicate ceramic that does not contain free silicone compounds, achieving "ultra-non-stick performance" that prevents any adhesive from adhering. 【Features】 ■ Ultra-non-stick performance effective against all types of adhesives ■ The coating does not release and has high durability ■ Shows good adhesion to various metals and rubber For more details, please feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improving the slip and adhesion of rubber! Special coating for rubber.

Improving the slip and adhesion of rubber! Special coating for rubber.

A fluororesin coating specialized for rubber, which has numerous achievements in anti-adhesion and slip applications.

Do you have any concerns such as objects sticking to rubber or the coating film cracking? Our company offers a specialized coating treatment for rubber that improves the sliding and adhesive properties, which are drawbacks of rubber. In addition to enhancing non-adhesiveness, it demonstrates good adhesion to rubber. It has excellent crack-following properties, making it difficult for the coating film to crack or peel. We have two types: a one-coat type containing fluororesin and an inorganic coating. 【Features】 [PTFE One-Coat] - A coating that maximizes the low friction characteristics of fluororesin. - Significantly improves sliding properties. [Inorganic Coating] - Offers better non-adhesiveness than fluororesin. However, due to its rough surface, sliding properties and cleanability are inferior. Please feel free to contact us for more details.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision machinery parts compatible! Fluororesin coating.

Precision machinery parts compatible! Fluororesin coating.

Non-blast, low-temperature treatment for coating! Introduction of a method that prevents deformation of the substrate.

When performing pre-treatment such as sandblasting or high-temperature firing on precision parts, there is a possibility that the substrate may deform. 【Issues】 ◆ The product may warp during the blasting process. Blasting involves applying abrasives to the product to remove surface debris and improve paint adhesion. However, depending on the shape of the product and the blasting area, warping may occur. ◆ The processing temperature for general fluorine coatings is 380°C, which may lead to substrate deformation. 【Improvements】 Our company uses a one-coat paint that allows for non-blasting and low-temperature treatment. It has excellent slip properties and wear resistance, and has a proven track record mainly in precision machinery parts and sliding applications. 【Overview of Work Process】 ■ Incoming Inspection ■ Ultrasonic Cleaning ■ Coating ■ Firing (120–190°C) ■ Inspection For more details, please refer to the catalog or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Method of applying fluororesin coating

Method of applying fluororesin coating

A detailed introduction to the application method of fluororesin coating, along with illustrations!

We will introduce the method for applying fluororesin coating. First, check the structure of the can body and perform degreasing by empty firing at 400°C. Next, finish the surface with blasting to achieve a white metal finish, apply primer, dry, and then bake, followed by painting the top coat. Finally, bake again and measure the film thickness using an electromagnetic thickness gauge and an eddy current thickness gauge through sampling. 【Application Method (Part)】 1. Can Body - During drawing creation: Structure check - Upon completion of canning: Base material test (welded parts and corners) 2. Degreasing (empty firing at 400°C) 3. Blasting: Surface finish is white metal *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluororesin coating

Fluororesin coating

We accommodate a variety of products, small lots, and short delivery times! We provide optimal coatings tailored to our customers' needs.

Kansai Polymer Co., Ltd. offers various surface treatments, including fluororesin coatings. We have over 40 years of experience in surface treatment technology. With our extensive knowledge and skills, we provide products tailored to meet our customers' needs. 【A must-see for those facing these issues】 - Substrate corrosion due to chemicals - Poor slip properties of rubber - Adhesive substances easily adhere, making cleaning time-consuming - Poor mold release properties, resulting in low production efficiency - Coatings peel off or break easily We can process items up to 3000mm in width, 2000mm in height, and 3600mm in depth in-house. (For rod-shaped items, depending on the diameter, shape, and coating area, a maximum length of 4800mm is possible.) Please feel free to contact us. ★Samples are available. If you are interested, please request through the inquiry form.

  • Processing Contract
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Prevent sticking of adhesive substances! Non-stick coating

Prevent sticking of adhesive substances! Non-stick coating

Achieving ultra-non-stick properties that do not allow various adhesives to adhere! A surface treatment technology that shows good adhesion to various metals and rubber.

The "KP-10 Series" is a coating that exhibits release properties due to a silicone-like substance covering the surface through a compound reaction. It is highly resistant to physical tack, demonstrating release properties with adhesive materials such as tape, and shows higher non-stickiness compared to fluororesin coatings. Additionally, because the surface layer does not separate and exhibits release without adhering to the opposing side, it has higher durability compared to other release coatings. 【Features】 ■ Possesses ultra non-stick performance effective for various adhesives ■ The coating film does not separate, ensuring high performance durability ■ Shows good adhesion to various metals and rubber The KP-10 Series consists of three types, each differing in non-stick performance and surface roughness. Technical documents detailing the characteristics of each series are currently available. *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Excellent wear-resistant PEEK coating

Excellent wear-resistant PEEK coating

High wear resistance! Coating that can be processed with a thin film (20-100μm).

PEEK coating is a coating that allows processing in a thin film (20-100 μm) while maintaining the performance of solid PEEK resin (chemical resistance, wear resistance, insulation). "PEEK" is a thermoplastic super engineering plastic that is very well-balanced in terms of high hardness, heat resistance, corrosion resistance, wear resistance, and machinability. 【Features】 ■ Has higher wear resistance than fluoropolymers such as PFA and PTFE ■ Exhibits performance that surpasses conventional fluoropolymer coatings *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive fluoropolymer coating "KPE Series"

Conductive fluoropolymer coating "KPE Series"

This is a coating that imparts conductivity to fluororesin. It prevents charging and can proactively prevent issues caused by static electricity.

The standard fluoropolymer coating is "insulating," but the "Conductive Fluoropolymer Coating KPE Series," which adds "conductivity" to the fluoropolymer, not only improves non-stick properties and chemical resistance like conventional fluoropolymers but also includes explosion-proof specifications and anti-static functions. As a result, it is widely used in semiconductor applications and plants. Our lineup of conductive coatings, the "KPE Series," includes multiple types, allowing us to recommend the most suitable product for your specific application. <For those facing these issues> ■ Concerned about static electricity generated by friction, leading to fire hazards. ■ Need corrosion and heat resistance but dislike insulators. ■ Worried about dust adhesion due to static electricity. *For more details, please download the PDF document or feel free to contact us.

  • Etching Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improved durability of fluororesin! Cross-linked fluororesin coating.

Improved durability of fluororesin! Cross-linked fluororesin coating.

A high-performance coating that exhibits strong wear resistance without reducing the non-stick, slippery, and chemical resistance properties of fluoropolymer coatings.

This is a cross-linked fluoropolymer coating that retains the excellent properties of fluoropolymer, such as non-stickiness and low friction coefficient, while improving wear resistance. Due to its outstanding characteristics, it is used in heavily worn sliding parts. Cross-linking refers to a reaction that connects previously independent molecules as if building a bridge between them. The "cross-linked fluoropolymer" utilizes this reaction, resulting in a stable molecular structure that provides remarkable wear resistance. The wear resistance of cross-linked fluoropolymer shows values approximately 3 to 5 times higher compared to standard PFA resin. 【Features】 ■ Ultra wear resistance not found in conventional fluoropolymers ■ Excellent properties similar to fluoropolymers ■ The unevenness of the coating reduces the contact area, enhancing non-stick and sliding performance ■ Complies with food sanitation laws *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coating with cross-linked fluororesin featuring uneven surface texture.

Coating with cross-linked fluororesin featuring uneven surface texture.

A new fluororesin coating with unevenness in the film, which has improved wear resistance.

This is a cross-linked fluororesin coating that has improved wear resistance. Due to its excellent properties, it is used in areas with severe wear and friction. Cross-linking is a reaction that bonds molecules together as if a bridge were built between them. "Cross-linked fluororesin" utilizes this reaction, resulting in a stable molecular structure that provides remarkable wear resistance. The wear resistance of cross-linked fluororesin shows values approximately 3 to 5 times higher compared to conventional PFA resin. 【Features】 ■ Super wear resistance not found in previous fluororesins ■ Excellent properties similar to fluororesins ■ The unevenness of the coating reduces the contact area, enhancing non-stick and sliding performance ■ Complies with food sanitation laws *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inorganic ultra-non-stick coating "KP-10 series"

Inorganic ultra-non-stick coating "KP-10 series"

Achieving ultra-non-stick properties that do not adhere various adhesives! It demonstrates good adhesion to various metals and rubber.

The "KP-10 Series" is an inorganic ultra-non-stick coating system that features "Si-O bonds." This system includes special aggregates in the base coat that create a rough texture (gritty) on the surface of the coating. By combining it with a top coat of inorganic silicate ceramic that does not contain free silicone compounds, we achieve "ultra-non-stick performance" that prevents various adhesives from adhering. 【Features】 ■ Ultra-non-stick performance effective against various adhesives ■ Coating film that does not contain free silicone compounds ■ Excellent adhesion to various metals and rubber The KP-10 series consists of three types, each with different non-stick performance and surface roughness. We are currently providing technical documents that describe the characteristics of each series. *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thick film fluoropolymer coating resistant to chemicals.

Thick film fluoropolymer coating resistant to chemicals.

Ideal for environments using pharmaceuticals! Fluororesin coating with a film thickness of approximately 300 to 1000 μm.

Thick film fluoropolymer coating is a coating without pinholes (small holes) with a film thickness of approximately 300 to 1000 μm. In the case of standard fluoropolymer coatings, pinholes are likely to occur, allowing chemicals to penetrate through these pinholes, making them unsuitable for corrosion resistance. With thick film fluoropolymer coatings, repeated painting and curing can achieve a pinhole-free finish, thereby suppressing penetration by chemicals. Due to its excellent chemical resistance, it is often used for corrosion resistance purposes. 【Features】 ■ PFA: Provides a coating with top-class performance among fluoropolymers. ■ FEP: Slightly inferior in heat resistance compared to PFA, but chemical resistance is almost equivalent to PFA. ■ ETFE: Usable for most chemicals as long as the operating temperature is below 100°C. *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluororesin coating for rubber, resin, and glass.

Fluororesin coating for rubber, resin, and glass.

Ideal for anti-adhesion and anti-slip applications! Introduction of a construction method that maintains precision and minimizes variations.

Kansai Polymer Co., Ltd. performs fluororesin coating not only on metals but also on rubber and resin. We have numerous achievements in applications for adhesion prevention and slip resistance, thanks to our excellent followability and high adhesion. 【Overview of Work Process】 ■ Incoming Inspection ■ Solvent Wiping Cleaning ■ Coating ■ Baking (60–150°C) ■ Inspection For more details, please refer to our catalog or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Prevention of troubles caused by static electricity! Conductive fluororesin coating.

Prevention of troubles caused by static electricity! Conductive fluororesin coating.

This is a coating that imparts conductivity to fluororesin. It prevents charging and can proactively prevent issues caused by static electricity.

The standard fluoropolymer coating is "insulating," but the "Conductive Fluoropolymer Coating KPE Series," which adds "conductivity" to the fluoropolymer, not only improves non-stick properties and chemical resistance like conventional fluoropolymers but also includes explosion-proof specifications and static electricity prevention functions. As a result, it is widely used in semiconductor-related applications and plants. Our lineup of conductive coatings, the "KPE Series," includes multiple types, so we can recommend the most suitable product based on your specific application. <For those facing such issues> ■ Concerns about ignition due to static electricity generated by friction. ■ Dislike of insulators but need corrosion resistance and heat resistance. ■ Worries about dust adhesion caused by static electricity. *For more details, please download the PDF document or feel free to contact us.

  • Etching Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Coating

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.