Coating(cfrp) - List of Manufacturers, Suppliers, Companies and Products

Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Please use this as an alternative to the discontinued fluorinated release agent! You will achieve even better release properties. No regulated substances used.

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food or medical purposes.)

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reduce the frequency of replacing automotive interior cutting blades to 1/3! Ultra-thin non-stick coating.

【Reduce maintenance costs and downtime】Extend the lifespan of blades from 1 month to 3 months with ultra-thin film coating that withstands wear attacks from fiberglass!

The interior linings used in automobiles (such as door trims and ceiling materials) often employ glass fiber (GF) composite sheets to enhance soundproofing and thermal insulation. However, in the manufacturing process, the extremely hard glass fibers cause significant wear on cutter blades, leading to blade replacements approximately every month. The downtime associated with line stoppages and the management and sharpening costs of spare blades have become a substantial burden. The solution to this issue is the ultra-thin, non-stick coating "NonStick STC." **Benefits of Introducing This Product:** - **Blade lifespan extended by "3 times":** It provides excellent slip properties (low friction), reducing the friction load caused by glass fibers. The sharpness lasts from one month to three months. - **Replacement frequency significantly reduced to "1/3":** It decreases the number of regular blade replacements, dramatically reducing labor hours and the management and sharpening costs of spare blades. - **Minimization of line stoppages (downtime):** It reduces the downtime associated with replacements, contributing to an overall increase in the operational efficiency of the factory. This is the optimal coating solution that simultaneously enhances durability and reduces maintenance.

Company：日建塗装工業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating, suitable for room temperature processing, 'Cerashield F'

Can be processed at room temperature without the need for heat treatment such as entering a firing furnace! Protects against acids and alkalis.

"Serashield F" is a coating made from a fluorine-based material that can be applied at room temperature and has excellent chemical resistance. By protecting equipment and jigs from acids, alkalis, and dirt, it extends the replacement period, improves cleaning and maintenance, and leads to cost reduction. It can be applied to various materials, including metals, PVC, PET, and polycarbonate, making it suitable for a wide range of substrates. 【Features】 ■ Can be applied to various substrate materials ■ Coating is possible not only for various metals but also for resins such as PVC, PET, and polycarbonate ■ Fluorine-based material that can be processed at room temperature ■ No need for heat treatment such as placing in a furnace *For more details, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CFRP/Coating to Suppress Deflection and Improve Speed [Case Study Available]

Contributing to particle suppression in CFRP. *We will be exhibiting at the 24th Mechanical Elements Technology Exhibition!

One of the characteristics of CFRP is that it is a lightweight material that is less prone to distortion and bending. Therefore, its adoption as an alternative material to metals is progressing, but there are challenges such as the generation of particles from CFRP. By combining our fluororesin coating technology, we expect effects such as particle suppression, corrosion resistance, and non-stick properties. You can see the actual product at the "Mechanical Elements Technology Exhibition" held in Makuhari starting in February! *We have introduced our achievements in a PDF, so please download it from the link below to take a look.

Company：NIPPON FUSSO CO.,LTD.
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for carbon fiber CFRP, excellent release properties.

Overwhelming continuous release properties in carbon fiber CFRP molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. Samples available.

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult carbon fiber (CFRP)! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluororesin is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cracking occurs during the release of carbon fiber sheets. ■ There is no cloudiness in the workpiece even with transparent resin molding. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is necessary during mold reworking. ■ It is effective in reducing melt fracture and sharkskin in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] A case where continuous molding became possible with CFRP thin material molding.

[Case Study of Coating Agent Release] We will introduce the background, challenges, proposed solutions, and results of implementation for a battery separator manufacturer. *Samples available for distribution.

【Issue】 - Currently, the yield rate is 0%. No good products can be obtained with conventional release agents. We want to achieve continuous molding for at least 1000 shots. 【Solution】 Using "Fluorosurf FG-5093" makes it possible to mass-produce 1000 shots! Additionally, cleaning of the molded products is unnecessary, significantly improving process efficiency! Fluorosurf FG-5093 reduces the adhesion of the molding resin to the surface when applied to the mold, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance continuous release agent Fluorosurf CFRP molding case study

Even difficult moldings that cannot be released with regular release agents can be continuously released. Additionally, there is no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It proves effective in cases where conventional release agents fail to work properly. It has excellent durability, with a track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as fuel cell separators, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Demonstrates its true capabilities in thin material molding with overwhelming release properties. Easy to apply, can be applied on-site during molding, and dries at room temperature in just 5 minutes. Free of PFOA/PFOS. Non-flammable and safe.

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating(cfrp) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Coating Product List

Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Reduce the frequency of replacing automotive interior cutting blades to 1/3! Ultra-thin non-stick coating.

Fluororesin coating, suitable for room temperature processing, 'Cerashield F'

CFRP/Coating to Suppress Deflection and Improve Speed [Case Study Available]

High-performance release agent for carbon fiber CFRP, excellent release properties.

[Example] A case where continuous molding became possible with CFRP thin material molding.

High-performance continuous release agent Fluorosurf CFRP molding case study

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Search Keywords Related to Coating