Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
481～495 item / All 592 items
Compact O2 Concentration Meter for Diving Cylinders / Model Number M3272DV-T35-0000S
It has a function to check the oxygen concentration when performing nitrox diving and to display the maximum diveable depth at that concentration.
Compact Oxygen Concentration Meter for Diving Cylinders / Model Number M3272DV-T52135S
● High-resolution and high-precision measurement specifications ● Three-stage display with backlight, button operation for upside-down display ● Model lineup with MOD calculation function for nitrox ● HOLD/Min/Max display, auto power-off function ● Functional case design, waterproof housing, long battery life
The pump suction type MI1KY-2000TVOC is a high-precision volatile organic compound measuring instrument that uses PID (Photoionization Detection principle).
The MI1KY-2000TVOC can detect approximately 370 types of chemical substances and can be adjusted for the ionization energy of each chemical, allowing for high precision and rapid measurements.
The mechanism by which sulfurous gas and sulfur dioxide gas (SO2 gas) affect the human body.
Volcanic accidents remind us of the disaster caused by the eruption of Mount Ontake in 2014. However, in terms of the number of volcanic incidents, accidents due to volcanic gas poisoning are overwhelmingly more frequent and are reported every year. Additionally, with the revision of the Active Volcano Law, local governments are obligated to ensure the safety of tourists, increasing the importance of monitoring volcanic gases. This time, I will explain the mechanisms by which volcanic gases (sulfur dioxide and sulfurous gas) affect the human body. <Sulfurous Gas and Sulfur Dioxide (SO2)> Harmful gases such as sulfurous gas and sulfur dioxide (SO2) damage the epithelial lining of the airways. This damage leads to the accumulation of inflammatory cells in the airways, causing inflammation. Due to this inflammation, the airways become sensitive, leading to airway constriction and triggering asthma attacks. The type of inflammation varies among individuals, resulting in allergic asthma or COPD. It is believed that various factors, including genetic and environmental influences, contribute to these types. Therefore, individuals have different tolerances to the gas, and there have been reports of asthma patients experiencing attacks even at low concentrations of around 0.2 ppm. Additionally, it is said that there are many undiagnosed asthma patients who are unaware of their condition.
Compact, portable, fully standalone optical oxygen concentrator. The trace model can also use an ultra-sensitive sensor.
The Fibox 4 is a compact, portable, fully standalone optical oxygen meter. The housing is robust, lightweight, and splash-proof, allowing for mobile use under harsh conditions. It features a large rechargeable battery and a high-capacity memory that can store vast amounts of data, enabling long-term measurements independent of a PC. Connection to a PC and battery charging are done via USB. In addition to the automatic temperature compensation function found in previous models, this model has added pressure and salinity compensation features. The Fibox 4 is compatible with existing Presens sensor accessories. All Presens oxygen sensors come with a barcode. The Fibox 4 is equipped with a new sensor and calibration management system that utilizes this barcode, making sensor handling significantly easier. By simply scanning the barcode attached to the sensor with the built-in barcode reader, the sensor recognition and calibration are completed, allowing for immediate measurements. In the trace model, a PSt9 sensor, which is even more sensitive than the PSt6, is available for oxygen barrier evaluations and similar applications.
This is a detector that visualizes VOCs as a measure for risk assessment of chemical substances in the work environment, allowing for the confirmation of exposure conditions through trend graphs.
Measurement in accordance with the "Guidelines for Personal Exposure Measurement of Chemical Substances" (established by the Japan Society for Occupational Health) is now possible, serving as a visualization tool for those who regularly use organic solvents, in addition to confirming one's own work environment. <Features> - Compatible with 17 types of chemical substances, including toluene, and alerts with a buzzer and lamp when TWA and STEL levels are reached. *This device is not an analytical instrument but is intended for trend management in environments with multiple organic solvents. - Real-time measurement of instantaneous values, average values, TWA (time-weighted average), and STEL (short-term exposure limit) of chemical concentrations in the air. - Compact and lightweight design. - Built-in NFC allows for trend management through data reading. *Data collection set (optional) makes it easy to import data.
Adoption of materials resistant to saltwater and acids.
A measuring device that can check the concentration and freezing point of glycol-based heat transfer fluids (ethylene glycol and propylene glycol).
Measuring gas: chlorine dioxide, standards: 2ppm / 20ppm / 200ppm / 5ppm, etc.
The "F12 type" is a chlorine dioxide gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "ozone gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Chlorine Dioxide ■ Sensor Model: 00-1004 / 00-1005 / 00-1359 / 00-1425 ■ Minimum Range: 0-1ppm / 0-5ppm / 0-200ppm / 0-1ppm ■ Maximum Range: 0-5ppm / 0-200ppm / 0-1000ppm / 0-5ppm ■ Standard: 2ppm / 20ppm / 200ppm / 5ppm ■ Auto Test Generator: 00-1538 / 00-1538 / - / 00-1538 *For more details, please refer to the PDF document or feel free to contact us.
Measurable formaldehyde gas! Used in various places such as plants and laboratories.
The "F12 model" is a formaldehyde gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "EOG gas concentration meters," "ozone gas concentration meters," and "chlorine dioxide gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Formaldehyde ■ Sensor Model: 00-1040 / 00-1349 ■ Minimum Range: 0-20 ppm / 0-500 ppm ■ Maximum Range: 0-200 ppm / 0-2000 ppm ■ Standard: 20 ppm / 1000 ppm ■ Auto Test Generator: 00-1539 *For more details, please refer to the PDF document or feel free to contact us.
This is an EOG gas concentration meter used in various places such as plants and laboratories.
The "F12 model" is an EOG gas concentration meter. The gas detectors from ATI that we handle can measure over 30 types of toxic gases and oxygen. They are used in various locations such as plants and laboratories. Additionally, we also offer "ozone gas concentration meters," "chlorine dioxide gas concentration meters," and "formaldehyde gas concentration meters." 【Sensor Selection Table】 ■ Measured Gas: Ethylene Oxide ■ Sensor Model: 00-1039 ■ Minimum Range: 0–20 ppm ■ Maximum Range: 0–200 ppm ■ Standard: 20 ppm ■ Auto Test Generator: 00-1539 *For more details, please refer to the PDF document or feel free to contact us.
This is a hydrogen peroxide concentration meter that measures the concentration of hydrogen peroxide contained in the liquid inline.
- Since it uses a diaphragm-type polarographic sensor, no reagents are required and maintenance is easy. The cost of maintenance is also low. - The electrodes are protected by a diaphragm, making them resistant to dirt and less susceptible to the electrical conductivity of the measurement solution. - The flow cell can be selected from two types: waste water type and circulation type. - The measurement range can be selected from one point among 0-2, 0-20, and 0-200 ppm.
It is a small and lightweight gas detector capable of measuring the oxygen concentration in the air. The sensor and battery life are very long-lasting, approximately 2 years.
The PDM+ oxygen concentration meter is a gas detector capable of detecting oxygen in the environment. When powered on, it continuously measures oxygen levels and alerts you with an LED, vibration, and sound alarm when dangerous conditions arise. It is easy to operate, and there is a metal clip on the back of the unit that allows it to be secured to a shirt, belt, helmet, or other items.
Fluorine concentration can be measured with a wide range and high precision from a minimum of 0 to 0.5 ppm to a maximum of 0 to 100 ppm!
We adopt the SKA method to calculate concentration based on the difference in concentration between a standard solution of known concentration and the sample. By comparing the potential differences, we can minimize the impact of the measurement environment on the results. During measurement, reagents are used to adjust the pH. This removes interference from ions other than fluoride, enabling high-precision measurement of fluoride concentration.
It is possible to measure boron concentrations of up to 500 ppm with high precision!
By using a syringe that allows for injection volume adjustments in increments of 0.0015 ml, high-precision measurement of boron concentration can be achieved through the injection of titrant. The preparation of reagents is easy and inexpensive, allowing for low-cost operation. Additionally, by adjusting the concentration of the reagents, it is possible to change the measurement range.
Minimum measurement range 0~100 ppb! Capable of measuring low concentrations of boron!
This is an online boron concentration meter capable of measuring low concentrations of boron in the range of 0 to 100 ppb. After performing a blank measurement to correct for the effects of temperature and turbidity on the measurement, actual measurements are conducted. This minimizes the impact of environmental factors on the measurements, allowing for high-precision measurement of boron concentration.
