Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
1036～1050 item / All 2247 items
![Various small controllers for LED lighting [PWM/constant current/low voltage]](https://image.mono.ipros.com/public/product/image/c78/2000500240/IPROS15921739329739397088.jpeg?w=280&h=280)
[Demo unit available for loan] Compact and space-saving design, DIN rail mountable.
This is a controller for LED lighting designed with a compact design that minimizes installation obstacles. For more details, please download the catalog.
[Demo unit available for loan] PoE compatible, no power wiring required, strobe model available, equipped with 10-bit remote dimming and ON/OFF function.
**Features** - PoE compatible, no power wiring required - Low heat generation and energy-saving due to strobe lighting method - 10-bit remote dimming (strobe lighting method only) - Equipped with LED unit ON/OFF function - Compliant with IEEE 802.3af Communication method: TCP/IP (100M / 10M bps) Power capacity: 30W or less Number of output channels: 2CH or 4CH Dimming method: Approximately 80kHz PWM dimming method (256 levels) or strobe lighting method (lighting pulse width: 1msec or less, 0-999usec) *Note: A separate PoE injector device is required for power supply.*
High-speed synchronous communication between drive devices is possible with a single unit! Approximately 30% space-saving compared to conventional models!
The "Compact PSC" is a programmable servo controller that enables high-speed synchronous communication between our drive devices via SERCOS communication. The "inter-device communication function," which was previously an optional card feature in the conventional "PSC7000 series," has been integrated into the main module. Additionally, it features a compact design that reduces the installation area by approximately 30% compared to previous products, allowing for space-saving installation. 【Features】 ■ High-speed calculations of 150 MFLOPS are possible due to the adoption of a high-speed DSP ■ Up to 10 axes can be controlled simultaneously at high speed in one rack (when using PG input and analog output) ■ Storage of abnormal information and production records can also be achieved at the application level ■ The MC protocol, a field network, is standardly equipped *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Enables complete customization to adapt to the diverse needs of the measurement and control market.
The AD-4820 consists of a CPU, OS, display unit, and communication interface. Based on the AD-4820, it is possible to create programs, sequences, and display screens as desired. Additionally, it can accommodate up to four slots from a wide range of input/output boards, enabling space-saving and cost reduction when building complex large-scale systems. For more details, please contact us or refer to the catalog.
We will customize the weighing application to meet your requirements.
We customize weighing applications and create new applications according to customer requirements. AD-4821A: Multi-Way Controller (Input Weighing), AD-4821B: Multi-Way Controller (Sorting Weighing), AD-4825: Weighing Controller for Formulation (Formulation Weighing), AD-4820-52: Belt Scale (Constant Feedware), AD-4820-53: Tension Meter (Tension Measurement), AD-4820-57: Concrete Batching Controller (Ready-Mix Concrete Plant), AD-4820-54: Garbage Crane, AD-4820-58: Simple Weighing Controller for Formulation (Input Weighing, Discharge Weighing, Formulation Scale). For more details, please contact us or refer to the catalog.
Equipped with constant feeder! Controls the belt speed while measuring the transport volume!
The "AD-4820-52" is a belt scale equipped with a constant feedwear function. It can control the speed of the belt while measuring the transport volume, allowing for a constant transport volume. The transport volume of the items on the belt and the speed of the belt can be displayed in real-time. Additionally, it displays the cumulative transport volume, moisture content correction, and the load rate of the belt scale. The monitor features a function to continuously monitor the cumulative value, making it easy to understand the characteristics of the belt scale. Furthermore, it allows for auto-zero, cumulative stop, and cumulative reset via signals from external devices. The panel uses a touch screen, providing a clear operating interface and making calibration (static and dynamic) tasks easy. 【Features】 ■ Equipped with belt scale mode ■ Easy to operate ■ Clear operating screen *For more details, please refer to the catalog or feel free to contact us.
![[Case Study] Removing corrosive gases occurring in the control room.](https://image.mono.ipros.com/public/product/image/e77/2000196205/IPROS5819048164099931613.jpg?w=280&h=280)
Remove the corrosive gas occurring in the control room and achieve stable operation.
At the pulp dissolving facility of the paper mill, corrosive gases were generated and flowed into the adjacent machine control room, causing corrosion of the control boards and resulting in frequent emergency stops of the machines. Issues: 1. The machine building, including the dissolving equipment, is maintained at positive pressure, causing the generated corrosive gases to flow into and fill the adjacent control room. 2. Corrosive gases such as sulfur dioxide and hydrogen sulfide are being produced, but the exact composition and concentration of the gases are unknown. 3. Due to the inability to accurately determine the gas composition, effective countermeasures cannot be implemented.
You can control the pump from a computer using a controller for the syringe pump.
- This is a controller for syringe pumps SBP and SCP. - By connecting to a computer via USB, you can store the pump's operating speed and volume in memory, and control the pump manually or from the computer. - When using a computer, please download and use the software SXP-APS from the Takasago homepage. Download URL: https://takasago-elec.co.jp/products/p14479/ *For more details, please contact us or download the PDF.
This is a controller for a 6-channel pump (stepping motor type)!
- This is a controller for a 6-channel pump (stepping motor type). - You can set the flow rate, rotation direction, and microstepping for up to 2 pumps and control them (the driving conditions of the pumps must be the same). - In calibration mode, you can perform flow rate calibration based on the actual measured values of the pump's flow rate.
Simple, low wiring, space-saving, ultra-compact gripper controller.
By using Atom-G1, a robot hand can be simply created. ○Features○ ≪Ultra-compact gripper controller≫ ・Simple, low wiring, space-saving ・With encoder feedback ≪Multi-axis control via high-speed serial RS485 communication≫ ・MAX: 625Kbps high-speed communication ・Up to 31 axes can be connected ≪Smooth control with S-curve acceleration and deceleration control≫
Data protection is thorough! Positioning controller compatible with AC servo motors from various manufacturers.
The "BMC2XH Series" is a positioning controller for two or more axes. It integrates two axes with the high-speed serial communication type positioning controller "Fics Series" or "LMC Series" and the AC servo positioning driver "Atom Series." With RS485 serial communication control, it is possible to expand motor control to 16 axes. Additionally, data management can be performed using a USB memory via a programmable terminal. 【Features】 ■ Low-cost 2-axis AC servo controller ■ Digital I/O: Standard equipped with 38DI/32DO ■ Compatible with various AC servo motors ■ RS485 serial communication control: Supports 2 to 16 axes ■ SRing serial communication control: Supports 2 to 8 axes *For more details, please refer to the PDF materials or feel free to contact us.
By using a PLC direct access controller, you can build an inexpensive, simple, and highly reliable motion network under the PLC.
The "PLC Direct Access AE-LINK Motion Controller PI Series" does not require a positioning unit for the PLC to use the NC positioning function of the AE-LINK compatible driver software. Additionally, by using the motion program on the PI side, there is no need to directly write motion-related descriptions in the ladder program, which reduces concerns about the ladder program. The motion program built into the PI is executed while accessing the PLC's data registers. Motor control is performed through operations on the PLC's data registers. For more details, please download the catalog or contact us.
Compact, high-power 4-quadrant PWM servo controller for DC motors.
ESCON is a compact, high-power 4-quadrant PWM servo controller for permanent magnet DC motors. The operating modes can be selected from speed control (closed loop), speed control (open loop), and current (torque) control, meeting a wide range of requirements. The ESCON servo controller is designed for command via analog voltage, and various analog and digital I/O functions can be configured. 【Features】 ○ Capable of operation in a wide range of drive systems with diverse operating modes ○ Speed feedback sensor ○ Each input and output can be configured for various functions ○ Ramp function determines acceleration and deceleration in speed control mode (both closed and open loop) ○ Speed comparator: outputs to digital output when the set speed is reached For more details, please contact us or refer to the catalog.
Can be installed without modifying existing gas lines with a standard 3-inch footprint!
The "1179C" is a versatile mass flow controller compatible with various applications. It has a full-scale range from 10 sccm to 20 sim and enables high-speed, highly reproducible flow control down to a low flow rate of 0.2 sccm. Additionally, by connecting a compatible pressure transducer, it can also be used as a pressure control device. It can be directly replaced with most common MFCs. The electrical connector is a D-sub connector with the same pin configuration, signals, and functions as industry standards, eliminating the need for changes to cables or connectors. It is compatible with MKS and other manufacturers' MFC power supplies and displays. 【Features】 ■ Supports demanding processes ■ Excellent zero stability due to patented sensor design ■ Accurate and highly reproducible flow measurement and control across a full-scale range of 10 sccm to 20 sim ■ Analog accuracy at full scale in percentage ■ Reduced downtime with fast warm-up ■ Compatible with other MKS MFCs and power readouts *For more details, please refer to the PDF document or feel free to contact us.
