Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
121～135 item / All 2332 items
Burkert's LFC (Liquid Flow Controller) measures and controls liquid flow rates from 15 to 600 ml/min.
Burkert's LFC (Liquid Flow Controller) measures and controls liquid flow rates from 15 to 600 ml/min. Compared to liquid mass flow controllers available on the market, it allows for the control of larger flow rates.
In addition to the high-speed response performance and high range availability of conventional models, it also supports CANopen!
● MFC compatible with CANOpen ● High response speed (fastest within 0.3 seconds, within 0.5 seconds for some models) ● A wide range of lineup supporting flow rates from 10 [ml/min] to 1500 [l/min] ● Protection rating IP65
Control small to large flow rates with a single unit! Capable of handling micro to high differential pressures (10kPa to 1.0MPa)! A German-made MFC for the IoT era that also enables cost reduction.
The German manufacturing industry is gaining attention with Industry 4.0. Here’s a proposal for a mass flow controller from Bürkert, a long-established German fluid control equipment manufacturer, designed for the IoT era! 【One device, multiple roles!】 ● Capable of controlling flow rates from low to high (for example, 20 to 1500 Nl/min (N2)) with a single unit ● Smooth control even at a low differential pressure of 10 kPa thanks to the inline sensor ● Smooth control even at a high differential pressure of 1.0 MPa (10 bar) ● Complete shut-off achieved with resin seals and shut-off functionality ● Fast response to set points with stability (within 0.3 to 0.5 seconds) ● The latest models can handle maximum flow rates of up to 2500 L/min! 【Easy to implement & ready for immediate use!】 ● Shipped calibrated, so no setup or adjustment is needed for immediate use ● No dedicated power supply required (operates on DC 24V) for easy installation 【Unique to Bürkert & IoT generation】 ● Flexible support for communication methods such as OpenCAN, fieldbus, RS485, in addition to analog input/output signals ● Models with protection rating IP65 are also available ● Proposals focused on maintenance ease and space-saving designs are also possible!
High-speed response within 0.3 seconds! For devices with frequent changes in set flow rate! Wide pressure range support (0.01 to 1.0 MPa).
Industrial mass flow controllers by Bürkert! These mass flow controllers boast various specifications that set them apart from competitors, designed for industries requiring diverse specifications, unlike those for the semiconductor industry. In addition to response speed: 【Bürkert's industrial mass flow controllers feature】 ● High pressure compatibility → Up to 1.0 MPa ● Minimum required differential pressure → 10 kPa is sufficient ● High flow rate → Capable of controlling 2500 Nl/min (equivalent to nitrogen) with a single unit ● Warm-up operation → Ready in 1 minute ● Tight shut-off capability → Reduces costs and space for solenoid valves 【Additionally, as IoT generation mass flow controllers】 ● Compatible with various communication standards EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET
Mass flow controller (MFC) compatible with a wide range of operating pressures. It enables high-speed response within 0.3 seconds. It can also control large flow rates!
Industrial mass flow controllers by Bürkert! These mass flow controllers boast various specifications tailored to different industries, setting them apart from competitors with unique features. Beyond pressure range, Bürkert's industrial mass flow controllers offer: ● Rangeability → High precision of 1:100 ● High flow rate → Capable of controlling 2500 Nl/min (equivalent to nitrogen) with a single unit ● Warm-up operation → Ready in 1 minute ● Tight shut-off capability → Reduces costs and space for solenoid valves Additionally, as IoT generation mass flow controllers, they support various communication standards: EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET.
High-flow, high-pressure mass flow controllers (MFC) that contribute to increasing the throughput of devices and processes.
Mass flow controllers for high flow and high pressure specifications are Bürkert! While many mass flow controllers in the industry have somewhat standardized specifications, we have learned through recent activities that customers have various requests such as "I want to achieve higher flow rates" and "I want to flow without reducing pressure." [Bürkert's industrial mass flow features] ● High flow → Capable of controlling up to 2500 Nl/min (equivalent to nitrogen) with a single unit ● High pressure specifications → Supports up to 1.0 MPa Additionally, ● Low differential pressure specifications → Supports from 5 kPa ● Tight shut-off capability → Reduces costs and space for separate solenoid valves ● Response speed → From 300 msec ● Warm-up time → 1 min [Furthermore, as an IoT generation mass flow] ● Supports various communication standards Compatible with various communications such as EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET, etc.
Right angle angle head
The machining center equipped with an ATC device features an arrestor arm with an orientation ring and positioning pins, allowing it to rotate 360° relative to the body. This design facilitates easy adjustment of the positioning block mounted on the spindle housing of the machining center, as well as the drive taper and head section.
Adjustable type from 0 to 90 degrees.
It is for a machining center with an ATC device, and the head angle can be adjusted from 0 to 90 degrees.
Equipped with a screw tightening management system that allows real-time reading, confirmation, and saving of torque values, angles, and time when tightening or loosening screws!
The bank (memory) function allows for a maximum of 56 torque settings. By connecting to a PC, various data can be imported via dedicated software. It is equipped with a function to detect errors that occur during screw tightening. 【Main Specifications】 - A function that adjusts for individual differences in the built-in motor to match the actual torque is included. - The controller can be connected to a PC via USB, allowing for the setting and confirmation of various parameters from the PC. Torque values can be monitored in real-time! The dedicated software comes bundled with the controller. - Equipped with 7 memory functions! Screw tightening and loosening conditions can be freely set! Control parameter functions enable high-precision screw tightening, and error parameter functions detect screw tightening troubles. - Features a "slight return function" to release the bite between the bit and the screw head. - It is possible to hold the set torque for any type of screw for the set time and tighten the screw. *This is a dedicated controller for the Hayashi Repic precision electric screwdriver Hi-Matic DC coreless series. *We offer demo units for loan along with the driver. Please feel free to contact us first.
The evolving REJ servo controller PSC has gained infinite expandability!
The PSC7000 is a programmable servo controller that is a higher compatible model of the PSC5000 series. By combining it with our latest servo drive, the VZ7000 series, it provides an optimal solution for multi-axis synchronous control applications and servo applications.
High-speed, high-precision constant flow supply of powder particles. Model Predictive Control Feeder Controller.
Model Predictive Control is a method that models the behavior of the controlled object, uses that behavior model to predict future states, and determines the control input to bring the system as close as possible to the target value. By using the behavior model incorporated internally, it predicts whether a "difference" will arise between the current control input and the set target value in the near future if the current control input is maintained. If it is determined that a "difference" will occur, a modified control input is output to the controlled object. Unlike PID control methods, which make corrective actions after a control deviation appears, Model Predictive Control predicts and controls in advance using the behavior model, making it less prone to hunting and allowing for stable control. For more details, please contact us or refer to the catalog.
We will customize the weighing application to meet your requirements!
This catalog is a product catalog of a company that provides a wide variety of electronic measurement and weighing instruments, centered around high-precision and ultra-fast A/D (analog/digital) conversion technology. It features various products that can be selected according to application, including the "Multi-Weighing Controller," which independently processes indicator functions and weighing control for each channel; the "Batch Controller," which performs weighing control for batching hoppers; and the "Belt Scale Controller," which measures transport volume while controlling the speed of the belt to maintain a constant transport volume. [Contents Included] - Multi-Weighing Controller - Batch Controller - Belt Scale Controller - Tension Meter - Concrete Batcher Controller, etc. *For more details, please refer to the catalog or feel free to contact us.
Customization is also possible to meet your needs!
The AD-4821A is a channel weighing controller that has an indicator function and independently performs processing such as measurement control for each channel. It processes weight data from up to 12 scales at high speed for input measurement. It can connect multiple scales, making it suitable for blending raw materials with significantly different weight ratios. Equipped with an LCD display adapted for multi-channel scales, it features a 5.7-inch color LCD display and a touch panel to enhance visibility and operability. With a touch panel interface, it allows for various settings, calibration, and interface checks. Additionally, it supports customer customization with a rich variety of interfaces. Please feel free to consult us. 【Features】 ■ Connects up to 12 scales ■ LCD display adapted for multi-channel scales ■ High-speed sampling for all channels ■ Compact size *For more details, please refer to the catalog or feel free to contact us.
The processing related to measurement control has been consolidated into a compact main unit!
The "AD-4825" is a multi-channel weighing controller that integrates the measurement control and aggregation processes for batching scales. It can control up to 8 channels of measuring devices, allowing for a maximum of 300 types of batching formulas, up to 100 types of raw material lists, and registration of up to 30 types of raw materials per batch. It enables cost reduction and labor savings through the miniaturization of control panels and reduced wiring. 【Features】 ■ Capable of aggregating measurements from up to 8 measuring devices ■ Allows registration of up to 30 types of raw materials per batch ■ Compact design *For more details, please refer to the catalog or feel free to contact us.
High-functionality small hole printed circuit board (blind vias, via posts, through holes, etc.) preprocessing and plating equipment systematized with ultrasonically vibrating flow technology.
The "Super Control System," a high-speed and high-quality plating device for small hole printed circuit boards, combines an ultra-vibration α-stirrer, a vibration system, a cathode rocker (oscillation), and aeration using a porous ceramic aeration pipe, enabling high-speed and high-quality plating specifically for small hole printed circuit boards.
