Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
301～330 item / All 1378 items
A running charger that has advanced far beyond the conventional SBXE type.
The DC-DC converter "DC-2440SBXF" is a compact and lightweight on-board charger that has significantly advanced from the conventional SBXE type. It comes with a remote display unit that digitally shows voltage, current, and set voltage, improving visibility. For more details, please download the catalog.
It is a DC converter that efficiently converts a DC 24V system to DC 13.8V.
○External control terminal: Remote control via engine key linkage or external contact switch ○Ultra-low standby current: Approximately 80mA, with very low power consumption during standby, making it suitable for automotive use. ○High efficiency: Particularly necessary to convert electricity efficiently in valuable batteries, achieving approximately 90% efficiency. ○Dual output: Equipped with multiple terminals for maximum 40A and 15A. (However, the total current must be used below 40A) ○Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again) ○Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to regular power supplies. ○Automatic cooling fan: The fan starts when the chassis temperature exceeds a certain level and automatically stops when the temperature falls below a certain level. ○Slim design: Despite high current, it is compact and particularly slim. ○Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, selected for industrial use only.
It is a DC converter that efficiently converts a DC 12V system to DC 27.8V.
○Ultra-low standby current: Approximately 150mA, with very low power consumption during standby, making it suitable for automotive use. ○High efficiency: Especially important for valuable batteries, it achieves approximately 90% efficiency in converting electricity. ○Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) ○Low noise: Significantly lower noise than conventional switching converters, allowing for use similar to regular power supplies without worrying about noise. ○Slim design: Despite high current, it is compact and particularly thin. ○Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, specifically selected for industrial use.
It is a DC converter that efficiently converts a DC 48V system to DC 13.8V.
- External control terminals: Remote control via engine key linkage or external contact switch. - High efficiency: It is particularly necessary to convert electricity efficiently in the case of valuable batteries, achieving approximately 90% efficiency. - Dual output: Equipped with multiple terminals for a maximum of 40A and 1A. (However, the total current should be used below 40A.) - Overload electronic protection: Automatically cuts off output when overloaded. (To restore, the power switch must be turned back on.) - Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to a regular power supply. - Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when it falls below a certain temperature. - Slim design: Despite high current, it is compact and particularly slim. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, selected for industrial use only.
We propose reliable and excellent products and systems based on the technology and know-how accumulated from our extensive development experience!
Since its establishment in 1959, our company has challenged new technologies and inherited the accumulated expertise, prioritizing customer satisfaction and trust while contributing to society. We regard the creation of value as our responsibility at Shoei Electric, and we are committed to contributing to the overall development of society, adhering to laws and regulations, and focusing on environmental conservation to help build a prosperous society. Our company handles various temperature converters, transmitters, and also undertakes machining, structural design, and various contract manufacturing. For more details, please feel free to contact us or download our catalog.
The standard specification is AC100/110V, but special specifications are also available.
The "Standard Type (Stationary Type) Insulated AMP" is an insulated amplifier and insulated converter with standard specifications and characteristics: input voltage: 10V / 50mV / 10mV, output voltage: 10V / output current: 4-20mA, non-linearity: 0.06% max. / 0.03% max., response characteristics (-3dB): 12Hz / 500Hz. The input voltage ranges from DC ±10mV to 400V, the output voltage is below DC ±10V, and for current output types, special specifications are accepted within the range of DC 20mA or less. 【Specifications】 ○ Specification temperature range: 0 to 50℃ ○ Operating temperature range: -20 to 60℃ ○ Power supply: AC 90 to 121V, 48 to 420Hz ○ Weight: 1 kg For more details, please contact us or download the catalog.
High voltage insulated converter capable of continuous input of 2000V DC.
The high-voltage insulated amplifier and converter "MAK" has an insulation capability between the input circuit and other circuits with a withstand voltage of AC10kV (for 1 minute) and an impulse withstand voltage of 25kV (1.2×50μs), allowing for continuous input of DC2000V in the input signal. The input voltage ranges from DC±50mV to 2000V, the output voltage is DC±10V or less, and the output current is DC20mA or less, with special specifications available. 【Specifications】 ○ Operating temperature range: 0 to 50℃ ○ Operating temperature range: -20 to 60℃ ○ Power supply: AC90 to 242V, DC160 to 284V (shared AC100/200, DC200) ○ Power consumption: 15VA, 10W max. For more details, please contact us or download the catalog.
Optimal for high-speed control of rotating machines, etc.! High-speed insulated amplifier/converter with frequency characteristics of 10kHz (-3dB).
The high-speed isolation amplifier and converter "MAW-13" is a high-speed isolation amplifier and converter with a frequency characteristic of 10kHz (-3dB). The input voltage ranges from DC ±50mV to 400V, and the output voltage is below DC ±10V, with special specifications available for current output types up to DC 20mA. It is ideal for high-speed control applications such as rotating machinery. 【Specifications】 [Input] ○ Input resistance: 3MΩ min. ○ Maximum allowable input: ±50V continuous [Accuracy (after 15 minutes of power on)] ○ Non-linearity: Standard grade ±0.06% F.S. max. Precision grade (A) ±0.03% F.S. max. ○ Temperature drift: Standard grade ±0.02% F.S./℃ max. Precision grade (A) ±0.01% F.S./℃ max. For more details, please contact us or download the catalog.
World's smallest lightweight up/down/cross SDI converter【M_UD】
The 【M_UD】 is an ultra-compact and lightweight micro converter designed with dimensions of 68mm x 59.2mm x 20mm and a weight of 95g, supporting up-conversion, down-conversion, and cross-conversion. It can up-convert input SDI signals from standard definition SD-SDI to high definition HD-SDI, down-convert HD-SDI to SD-SDI, and perform cross-conversion between HD-SDI signals (such as converting 720p to 1080i). Conversion settings can be selected via the dip switches on the unit from [SD (standard definition)/720p/1080i/1080p], and the output video aspect ratio can also be set to "Full/14:9/Pillar (Letter)/Cut." The input voltage supports a wide range from DC 5 to 24V, allowing power supply from various devices via the included AC adapter or USB. Its ultra-compact and lightweight design makes it highly portable, suitable for use in filming and on-site applications.
![Analog to SDI Converter [1000AH]](https://image.mono.ipros.com/public/product/image/cf3/2000163543/IPROS9104767761622783071.jpg?w=280&h=280)
Analog to SDI converter with up-conversion function
The 【1000AH】 is a mini converter that converts analog signals (composite/component) into SDI signals. Even if your shooting equipment or playback device only supports analog video output, you can use the 【1000AH】 to convert it into an SDI signal that can be transmitted over long distances. It can be connected to professional monitors, switchers, projectors, and other devices equipped with SDI input terminals. Additionally, it features an up-conversion function that converts the input analog signal to 480i/720p/1080i/1080p. By combining the functions of an analog-to-SDI conversion converter and an up-converter into one device, convenience is enhanced. Furthermore, it is equipped with two SDI output channels and one HDMI output channel, allowing for simultaneous output to multiple devices such as confirmation monitors. The input voltage supports a wide range of DC 7 to 24V. In addition to the included AC adapter, it can be powered by various devices.
The DC connector is a screw-type that prevents disconnection! It excels in portability and versatility, making it usable in various 4K settings.
This product is a 4K-compatible video and audio signal converter that converts HDMI 2.0 to 12G-SDI, compliant with SMPTE ST2082 for long-distance transmission over a single coaxial cable, and to Quad 3G-SDI for UHD signal transmission over four coaxial cables. It features one HDMI 2.0 input terminal, two 12G-SDI output terminals, and four 3G-SDI output terminals. It is capable of converting a 4K signal input via HDMI 2.0 into both 12G-SDI and Quad 3G-SDI. Additionally, it supports simultaneous output to two 12G-SDI and Quad 3G-SDI, distributing the 4K signal to a total of three outputs. 【Features】 ■ HDMI 2.0 → 12G-SDI/Quad 3G-SDI conversion ■ Simultaneous output to two 12G-SDI and Quad 3G-SDI ■ Equipped with a DC connector to prevent disconnection *For more details, please refer to the PDF document or feel free to contact us.
Low power consumption, low heat generation, and stable signal output! Can be used in various settings.
At AD Techno Co., Ltd., we handle a variety of converters manufactured by AVMATRIX. The "Mini Converter Series" includes the 3G-SDI to HDMI mini converter and the HDMI to 3G-SDI mini converter. With an optimized internal circuit board design, it achieves a low power consumption of up to 2W while being capable of continuous operation for 24 hours, making it a reliable choice as a broadcast-quality converter. In addition, we also offer products such as the "3G-SDI/HDMI Scaling Cross Converter" and the "Scaling Converter Series." 【Mini Converter Series Features】 ＜MINI_SC 1112＞ ■ SDI input / HDMI output ■ Supports 3G/HD/SD SDI multi-format ■ Equipped with 1 SDI loop output ■ Pocket-sized with a dedicated mount bracket included ■ Compatible with 3G-SDI Level A/B input *For more details, please refer to the PDF document or feel free to contact us.
DC/DC converter (non-isolated step-down type)
Features: ■ Wide input voltage range ■ Few external components ■ Built-in overcurrent protection function ■ Built-in overheating protection function ■ Remote ON-OFF control available ■ Built-in short-circuit protection function ■ Built-in low input voltage detection function ■ Oscillation frequency 500kHz ■ Soft start function (optional setting) ■ Compact, high efficiency ■ Output voltage fine adjustment terminal included
It is a serial-LAN conversion device for communication with devices that have a serial port via LAN.
Due to its compact size, it does not require a specific installation location. Additionally, by using optional brackets, it can be mounted in a 1U size EIA rack.
It is a low-distortion RF signal E/O and O/E converter for analog use. It converts radio signals into light, transmits them through optical fibers, and then converts them back into radio signals.
The outdoor EOC-154, equipped with waterproof functionality IP65, allows for easy optical transmission setup when constructing outdoor audio communication networks for public broadcasting and other applications. (Note) The O/E converter (OEC-1050) is not waterproof.
This is a low-distortion analog RF signal E/O and O/E converter. It converts radio signals into light, transmits them via optical fiber, and then converts them back into radio signals.
The EOC-1003/OEC-1073 optical isolator converter is an optical isolation link. The analog RF frequency range covers from 1kHz to 75MHz, and the input and output are isolated through high isolation optical fiber transmission. Environmental noise resistance is improved by optical fiber transmission, which reduces the impact of external noise compared to coaxial cables. Regarding floating measurements, it is possible to perform floating measurements by connecting a battery.
Multi-channel rack-mounted E/O and O/E converters can be installed as optical repeaters for RF transmission between the base station and the antenna.
This device can accommodate up to 8 modules of E/O converters (EOC-173-1) and O/E converters (OEC-1070-1) in a 19-inch/1U rack-mounted body, allowing for input of analog RF signals in the frequency range of 100MHz to 3600MHz. Its slim design makes it ideal for systems that require the transmission of multiple antenna signals, as it can support up to 8 channels in a single device for multi-channel signal transmission.
We convert high-frequency signals up to 6 GHz into optical signals. Why not easily construct a lower loss transmission path by replacing coaxial cables with optical fibers?
The "Rack-Mount Optical Converter Supporting 100MHz to 6GHz" is an E/O and O/E converter that converts and transmits analog high-frequency signals into light. By replacing RF coaxial cables with optical fibers, it is possible to easily construct a low-loss transmission path. Up to 8 E/O and O/E modules can be mounted in a 1U size EIA 19-inch rack, allowing for a space-saving multi-channel configuration. 【Applications】 In high-frequency insensitive areas such as buildings, underground shopping streets, and tunnels, as well as between satellite ground stations and antennas, low-cost and low-loss transmission can be achieved by converting IF signals from long-distance coaxial transmission to optical. 【Features】 ■ Covers the mobile 5G (Sub6) band and supports a wide bandwidth from 100MHz to 6GHz ■ Capable of mounting up to 8 E/O and O/E modules in a 1U size EIA 19-inch rack ■ Allows for a space-saving multi-channel configuration ■ Each module can be inserted and removed from the back in a slot-type design ■ Configuration changes such as adding or removing modules can be made as needed *For more details, please refer to the product information or feel free to contact us.
High efficiency and high reliability DC-DC converter. The automotive reliability cultivated by Shin Denko is now at your fingertips.
This is a vehicle-mounted DC/DC converter developed primarily for small electric mobility. It is a product with a certain level of waterproofing, suitable for use in outdoor mobility. Electric vehicles are equipped with onboard electrical components such as high-voltage batteries, inverters, and motors, and due to space constraints, component mounting has become increasingly dense with each generation. Our DC/DC converter is designed to achieve further miniaturization and weight reduction while increasing power capacity. To meet these demands, low-loss soft-switching circuits and high heat dissipation and thermal distribution technologies have been adopted. Additionally, full digital control using DSP enables optimal power management and safety design, as well as communication with higher-level ECUs. <Features> ■ High efficiency and high reliability ■ Compliant with IP44 waterproof and dustproof standards ■ Parallel operation to resolve capacity shortages Shindengen supports the future of mobility. <Currently under development!> We are also developing high-voltage input products (800V input) to meet the needs for low voltage input and fast charging. Please feel free to contact us.
Eight contact outputs can be controlled individually! Remote control and monitoring of contact I/O via network.
The "POSE SE10-8A7B1" is a contact converter that performs monitoring and control of network-compatible input/output contacts. It allows for flexible monitoring and control of remote contacts via a browser or email. Using an inline frame in the user HTML area, you can incorporate images from surveillance cameras or integrate control buttons into the surveillance camera feed. 【Features】 ■ Remote contact control and monitoring via network ■ Supports inline frames (iframe) ■ Can send emails to up to 8 locations to notify of abnormal occurrences or changes in power status ■ Annual schedule setting is possible *For more details, please refer to the PDF document or feel free to contact us.
With two contact inputs, you can freely control the "buzzer sound" and "power"! You can easily and simply control the power using the contacts.
The "BEADS SE10-B1" is a contact converter that controls an AC100V power supply and a buzzer based on two contact input states. By switching modes when the contacts are ON:ON, ON:OFF, or OFF:OFF, various combinations can be selected to determine the ON and OFF patterns for the power supply and buzzer. It allows for easy and straightforward control of the power supply using contacts, making it immediately usable in security systems, AV systems, and measurement systems. 【Features】 ■ Independent of the network ■ Controls AC100V power supply and buzzer sound based on two contact input states ■ Enables control of power output and buzzer using combinations of sensors and switches, or contact outputs from IP cameras and sensors ■ Simple and straightforward control of power supply using contacts *For more details, please refer to the PDF document or feel free to contact us.
![[English Market Research Report] Global Market for Power Converters](https://image.mono.ipros.com/public/product/image/755/2001155806/IPROS6950437626267707270.png?w=280&h=280)
"Free samples" are currently available! Please check the application method from the [PDF download] button, or apply directly from the related links.
The power converter market is expected to reach 35 billion USD by 2030, with a projected market growth of 7.6% CAGR during the forecast period. In 2022, the market reached a quantity of 34,302,810 units, achieving a growth of 7.2% from 2019 to 2022.
We utilize our years of expertise to manufacture various types of power supply conversions.
It is a small and lightweight converter for DC voltage conversion. Custom-made options are also available.
Industry standard 1"x1" package! Compact, high insulation, high efficiency DC/DC converter.
The "MJW10 Series" is a compact, high insulation, and high-efficiency 10W DC/DC converter. It features a wide input range of 2:1, an isolation voltage of 1500VDC, and no minimum load requirement. The product lineup includes input voltages of 12, 24, and 48VDC, with output voltages ranging from 3.3 to ±15VDC. 【Features】 ○ Operating temperature range: -40℃ to +80℃ ○ Remote: On/Off function ○ UL/cUL/IEC/EN 60950-1 Safety Approval *For more details, please contact us.
1"x1"x0.4" metal package! High-efficiency DC/DC converter
The "MJWI10 Series" is a compact, high-insulation, high-efficiency 10W DC/DC converter. It features a 1"x1"x0.4" metal package, a 4:1 ultra-wide input range, and an isolation voltage of 1500VDC. The product lineup includes input voltages of 24 and 48VDC, with output voltages ranging from 3.3 to ±15VDC. 【Features】 ○ Efficiency: up to 87% ○ 25-w/in3 high power density ○ Remote on/off function ○ Compliant with EN55022 Class A ○ RoHS compliant *For more details, please contact us.
Industry standard 1"x1" package! Compact, high insulation, high efficiency DC/DC converter.
The "MJW15 Series" is a compact, high insulation, and high-efficiency 15W DC/DC converter. It features a wide input range of 2:1, an isolation voltage of 1500VDC, and no minimum load requirement. The product lineup includes input voltages of 12, 24, and 48VDC, with output voltages ranging from 3.3 to ±15VDC. 【Features】 ○ Operating temperature range: -40℃ to +90℃ ○ Remote: On/Off function ○ UL/cUL/IEC/EN 60950-1 Safety Approval (Pending) *For more details, please contact us.
1"x1"x0.4" metal package! High-efficiency DC/DC converter
The "MJWI20 series" is a compact, high insulation, and high-efficiency 20W DC/DC converter. It features a 1"x1"x0.4" metal package, a 4:1 ultra-wide input range, an isolation voltage of 1500VDC, and a maximum efficiency of 90%. The product lineup includes input voltages of 24 and 48VDC, with output voltages ranging from 3.3 to ±15VDC. 【Features】 ○ 50-w/in3 high power density ○ Remote on/off function ○ Output adjustment ○ Compliant with EN55022 Class A ○ RoHS compliant *For more details, please contact us.
2"x1.6"x0.4" metal package! 30W DC/DC converter
The "MPW1000 series" is a compact, high-isolation, high-efficiency 30W DC/DC converter. It features a 2"x1.6"x0.4" metal package, a 2:1 wide input range, and an isolation voltage of 1500VDC. The product lineup includes input voltages of 12, 24, and 48VDC, with output voltages ranging from 3.3 to ±15VDC. 【Features】 ○ Maximum efficiency of 89% ○ Remote on/off function ○ Output adjustment ○ Compliant with EN55022 Class A ○ RoHS compliant *For more details, please contact us.
2"x1"x0.4" metal package! 50W DC/DC converter
The "MKW50 Series" is a compact, high-isolation, high-efficiency 50W DC/DC converter. It features a 2"x1"x0.4" metal package, a 2:1 wide input range, an isolation voltage of 1500VDC, and a maximum efficiency of 92%. The product lineup includes input voltages of 12, 24, and 48VDC, with output voltages ranging from 3.3 to 15VDC. 【Features】 ○ 62.5-w/in3 high power density ○ Remote on/off function ○ Output adjustment ○ Compliant with EN55022 Class A ○ RoHS compliant *For more details, please contact us.
Remote on/off switchable! Compact, high insulation, and high efficiency 40W DC/DC converter.
The "MQWI40C series" is a compact yet highly insulated and efficient 40W DC/DC converter. It features a chassis and DIN rail mount type package, as well as an ultra-wide 4:1 input range. The product lineup includes input voltages of 24 and 48VDC, with output voltages ranging from 5.1 to 48VDC. 【Features】 ○ Excellent efficiency of up to 92% ○ Insulation withstand voltage of 2500VDC ○ Operating temperature range: -40℃ to +85℃ ○ Remote on/off function ○ UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking *For more details, please contact us.
