We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Cylinder.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Cylinder Product List and Ranking from 245 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.

Cylinder Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.

  1. Yuken Kogyo Co., Ltd. Kanagawa//Machine elements and parts
  2. 藤川伝導機 Tokyo//Industrial Machinery
  3. Parker TAIYO Osaka//Machine elements and parts
  4. 4 null/null
  5. 5 伸栄産業 Aichi//Machine elements and parts
Go to Company Ranking

Cylinder Product ranking

Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.

  1. CJT70/140 Series "CJT 7/14 MPa" Hydraulic Cylinders Yuken Kogyo Co., Ltd.
  2. Low-friction air cylinder "BF diaphragm type cylinder" 藤倉コンポジット
  3. What are the advantages of electric cylinders? Explanation of the structure! 新東工業
  4. 4 "CJT 21 MPa" Hydraulic Cylinders Yuken Kogyo Co., Ltd.
  5. 5 Hydraulic Cylinder Repair Service [Comprehensive Contract from Hydraulic Testing to Painting and Shipping] 永和

Cylinder Product List

106～120 item / All 946 items

Displayed results
Single-acting/Dual-acting Aluminum Cylinder "RA Series"

Single-acting/Dual-acting Aluminum Cylinder "RA Series"

Withstand lateral loads up to 10% of capacity, reducing cylinder wear! Safe to use even in environments prone to rust.

The "RA Series" is a single-acting/double-acting aluminum cylinder that weighs about 50-60% less compared to steel cylinders, making it easy to transport and install. With bearings synthesized from new materials, a floating state is formed on the sliding surface of the cylinder, allowing it to withstand lateral loads of up to 10% of its capacity, while also reducing cylinder wear. Additionally, we offer the double-acting aluminum center hole cylinder (hydraulic return) "RARH Series," which is approximately 40% lighter than steel center hole cylinders. 【Features】 ■ Weighs about 50-60% less compared to steel cylinders ■ Easy to transport and install ■ Can withstand lateral loads of up to 10% of its capacity, while reducing cylinder wear ■ The main material, aluminum alloy steel, can be safely used even in environments prone to rust *For more details, please refer to the PDF document or feel free to contact us.

  • 2021-11-01_16h10_43.png
  • 2021-11-01_16h10_49.png
  • 2021-11-01_16h10_55.png
  • 2021-11-01_16h11_03.png
  • 2021-11-01_16h11_11.png
  • 2021-11-01_16h11_32.png
  • 2021-11-01_16h12_02.png
  • 2021-11-01_16h12_18.png
  • 2021-11-01_16h12_42.png
  • cylinder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single-acting cylinder (spring return) "RC series"

Single-acting cylinder (spring return) "RC series"

It is possible to effectively distribute eccentric loads! Prevents galling scratches on the inner surface of the cylinder and early bearing damage.

The "RC Series" is a single-acting cylinder (spring return) that incorporates a double bearing (GR2) structure into the RC DUO cylinder. The return mechanism of the cylinder uses a reinforced spring, achieving both powerful tension and remarkable durability. The capacities range from 45kN to 100kN, 142kN, 233kN, 293kN/500kN, and 718kN/933kN. 【Features】 ■ The hydraulic seal is surrounded by bearings at both ends, allowing for effective distribution of eccentric loads. ■ By reducing the burden on the hydraulic seal, the durability is significantly improved compared to conventional products. ■ Prevents galling on the inner surface of the cylinder and early bearing damage caused by eccentric and dynamic loads. *For more details, please refer to the PDF document or feel free to contact us.

  • 2021-11-01_16h17_46.png
  • 2021-11-01_16h17_51.png
  • 2021-11-01_16h17_58.png
  • 2021-11-01_16h18_04.png
  • 2021-11-01_16h18_11.png
  • 2021-11-01_16h18_17.png
  • 2021-11-01_16h18_22.png
  • 2021-11-01_16h18_37.png
  • 2021-11-01_16h18_44.png
  • cylinder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic Nut Splitter "NSH Series"

Hydraulic Nut Splitter "NSH Series"

ATEX certified! An ideal tool for removing stuck or corroded nuts.

The "NSH Series" is a hydraulic nut splitter designed to comply with BS/ANSI flange standards. The cutting depth of the nut can be adjusted using the blade positioning scale to prevent damage to the bolt. It features an ergonomic design and a user-friendly handle position. The nut splitter has been certified as compliant with the 94/9/EC "ATEX Declaration" based on test results. 【Features】 ■ Designed to comply with flange standards ■ An ideal tool for removing nuts ■ Adjustable cutting depth to prevent bolt damage ■ Cutting heads and power heads can be exchanged according to application ■ Ergonomic design and user-friendly handle position *For more details, please refer to the PDF materials or feel free to contact us.

  • 2022-04-27_17h50_06.png
  • nut

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air-driven hydraulic torque wrench pump "LAT Series"

Air-driven hydraulic torque wrench pump "LAT Series"

ATEX certified, meeting the requirements for a compliant work environment! Suitable for use in tight scaffolding and work passages.

The "LAT Series" is a hydraulic pump that can be operated solely with air in harsh work environments that require explosion-proof performance. It has a mass that can be carried by one worker and a compact shape, making it suitable for use in narrow or cramped scaffolding, work passages, pipe racks, and lifts. Additionally, the hydraulic pump with a three-piston design achieves the highest level of tightening and loosening speed, allowing for cost reduction without delaying work. 【Features】 ■ ATEX certified, meeting work environment compliance requirements ■ Mass that can be carried by one worker and a compact shape ■ Standard roll cage to protect air equipment and the pump body ■ Pendant switch operable with air and equipped with a 4.5m cord ■ Comes with a certified 100mm calibrated gauge *For more details, please refer to the PDF document or feel free to contact us.

  • image_09.png
  • image_11.png
  • image_10.png
  • image_12.png
  • image_13.png
  • Hydraulic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: Arrangement of a 1,140-ton nuclear power plant module

Case: Arrangement of a 1,140-ton nuclear power plant module

Equipped with the SyncHoist system! A case where the length of the rigging could be easily and accurately adjusted.

South Carolina Electric & Gas Company (SCE&G) is working on an expansion project for a nuclear power plant and was tasked with installing a 2.4 million pound CA01 module. The CA01 module is not only very large and heavy but also generally has an irregular shape, making it difficult to handle within the required tolerances, necessitating additional personnel, equipment, and time. In response, Enerpac provided the SyncHoist system, a lifting device under the hook consisting of multiple specialized hydraulic cylinders. This system allowed operators to monitor and adjust each lifting point individually or in sync together with precision. *For more details, please refer to the PDF document or feel free to contact us.*

  • image_13.png
  • image_14.png
  • image_15.png
  • image_16.png
  • image_17.png
  • image_18.png
  • Hydraulic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: Safely removing furnace bricks from iron fixtures.

Case: Safely removing furnace bricks from iron fixtures.

Introducing examples using the RC series hydraulic cylinders and P series hydraulic hand pumps!

Vesuvius processes bricks used inside industrial furnaces. The bricks start in a "soft" state and need to be compressed, hardened, and heated before being placed in the furnace. They are packed into a steel box for compression, which solidifies the bricks; however, after compression, the bricks stick to the steel fixtures, requiring considerable force to remove. To address this, a 50-ton hydraulic cylinder and a manual hand pump are used. Pressure is applied to the release rod to detach the bricks from the steel fixtures. The hydraulic system provides a quick and safe solution. 【Case Summary】 ■Customer: Vesuvius (Poland) ■Products: RC series hydraulic cylinders, P series hydraulic hand pumps ■Result: Provided a quick and safe solution *For more details, please refer to the PDF document or feel free to contact us.

  • image_24.png
  • Hydraulic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: The synchronous lift system activates the offshore oil platform.

Case: The synchronous lift system activates the offshore oil platform.

43,000-ton floating oil production system! Introducing a case where integrity was successfully maintained!

Maintaining structural integrity throughout the lift was essential not only for ensuring the safety of the lift but also for securing structural integrity and safety throughout its operational lifespan. To achieve this, we utilized Enerpac PLC-controlled 700 bar synchronized lifting technology to individually control 352 small high-pressure (700 bar) 300-ton hydraulic cylinders, which were integrated into the active skids under the steel structure in groups. We were able to detect and control deflection within the required range of 210 mm over a 70-meter span between the pontoon and the main superstructure, thereby protecting its integrity throughout the lifting, weighing, moving, and launching processes. [Case Overview] ■ Client: Marine and Heavy Industry in Malaysia (Johor Bahru) ■ Product: EVO Synchronized Lifting System *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.png
  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: Pull pin for oil well casing elevator spider.

Case: Pull pin for oil well casing elevator spider.

We will introduce a case where we provided a hydraulic solution to pull out a pin within 15 minutes!

All boreholes of oil wells being drilled must be covered with durable materials to prevent contamination and provide structural support during drilling. The elevator spider is used as a guide to center each casing, and the pins need to be replaced with each drilling to remove corrosion and dirt that accumulates during the process. Additionally, the existing process for removing the pins at MOISS took up to four hours and required continuous hammering. The spindle bar passes through the center of the "RCH series" hollow cylinder attached to a metal sleeve and connects to the pins of the elevator spider. The "RCH series hollow plunger hydraulic cylinder" equipped with the "P series Ultima hydraulic hand pump" provides a hydraulic solution to pull out the pins in under 15 minutes, saving the maintenance team several hours. *For more details, please refer to the PDF document or feel free to contact us.*

  • image_02.png
  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • cylinder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: The synchronous pump and high-tonnage cylinder stabilize the ship's cruising range.

Case: The synchronous pump and high-tonnage cylinder stabilize the ship's cruising range.

The body and the plunger cylinder have a strong and corrosion-resistant soft nitriding finish!

To support the construction of the new Joint Support Ship (JSS), the team at Seaspan Shipyards, based in Vancouver, aimed to find more effective ways to keep the vessel level throughout the project. To move large and heavy objects effectively, safely, and accurately, precise control and synchronized movement of all lifting points are required. To achieve this, the "Enerpac EVO synchronized lifting pump" and 12 "high-capacity hydraulic lifting cylinders" were specified and supplied by the local Enerpac distributor, Hyseco. By using only one operator to control 12 lift points from a single intuitive interface, productivity and accuracy were improved, ultimately helping to maintain the structural integrity as the build progressed. *For more details, please refer to the PDF document or feel free to contact us.*

  • image_02.png
  • image_03.png
  • Hydraulic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: The jack system slides the Holbrook Canal into the designated position.

Case: The jack system slides the Holbrook Canal into the designated position.

Horizontal bridge slide method! I was able to complete the slide in 52 minutes!

Minimizing the time that State Route 266 is closed was a primary objective during the reconstruction of the bridge over the Holbrook Canal. The new bridge was initially used as a detour while the defective bridge was being demolished, and once the old bridge was taken down, the new bridge needed to be slid into position at the original bridge's location. To slide the new bridge into the designated position, a lateral bridge sliding method was employed. We provided a hydraulic solution that could push the new 44.5-foot bridge structure into the designated position using the lateral sliding method with PTFE slide elements. We supplied two "RR series double-acting hydraulic cylinders," each equipped with a unique "ZU series hydraulic pump" and integrated pendant control. The pendant control allowed the operator to maintain individual control and manage any shifts in the bridge structure between the abutments or recover from wedging. *For more details, please refer to the PDF document or feel free to contact us.*

  • image_02.png
  • image_03.png
  • Hydraulic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study: Descent and Leveling of Caisson Pier Box

Case Study: Descent and Leveling of Caisson Pier Box

Each pier has two independently controlled hydraulic jacks that precisely lowered the caisson!

The existing Johnson Street Bridge, which has a 90-year history, is located in the heart of Victoria, British Columbia, and is in the process of being replaced with a new bridge that will serve the community for the next 100 years. The 1,100-ton bascule bridge box is composed of steel and concrete caissons and needed to be precisely lowered onto 16 large piers. Therefore, we provided 32 "CLSG high-tonnage hydraulic cylinders" and 3 "EVO synchronized lift systems." All three systems are networked, allowing one operator to control all 32 points from a master control user interface. By combining the system with the bar lowering method, the company improved precision, productivity, and efficiency, completing the lowering and leveling of the caissons in just three business days. *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.png
  • image_03.png
  • image_04.png
  • Hydraulic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FLAT FACE CUPLA FF Type - Hydraulic Coupling That Reduces Fluid Spillage

FLAT FACE CUPLA FF Type - Hydraulic Coupling That Reduces Fluid Spillage

Up to twice the flow rate compared to our conventional models! For die casting machines and various types of casting equipment.

FLATFACE CUPLA FF Type is a quick connect coupling for hydraulic piping, featuring a flat contact surface. Compared to our other 35 MPa hydraulic CUPLA, it delivers 1.5 to 2 times higher flow rate. Its unique valve structure minimizes spillage and air ingress during connection and disconnection. With a working pressure of 35 MPa, it is suitable for hydraulic piping with pressure fluctuations, such as those found in die casting machines. Features: - Easily connected simply by pushing the plug into the socket. - Separation prevention mechanism prevents accidental disconnection caused by vibration or impact during connection. - Available in various thread sizes (3/8", 1/2", 3/4", and 1") For more details, please refer to the PDF catalog or feel free to contact us.

  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • image_07.png
  • image_08.png
  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lightweight Magnetic Cylinder "MaxLyte"

Lightweight Magnetic Cylinder "MaxLyte"

Contributing to cost reduction and performance improvement! Easy replacement of parts in the mold station.

"MaxLyte" is an advanced magnetic cylinder product from Rotometrics that can achieve cost reduction and performance improvement. This lightweight magnetic cylinder is 40% lighter than standard magnetic cylinders available on the market. It is designed and manufactured to provide superior durability, resistance to bending, and heat resistance compared to typical lightweight magnetic cylinder products. With a global manufacturing system and product support, it ensures quick delivery and continuous uptime, providing solutions that add value to your press system. [Features] - Designed to enhance durability - Achieves over 40% weight reduction - Reduces transportation costs and lowers CO2 emissions during transport due to lightweight design - Global manufacturing: Eureka, Missouri, USA; Aldridge, UK; Huzhou, China - Can be improved to extend tool life - Lightweight magnetic design allows for safe and secure operation *For more details, please download the PDF or feel free to contact us.

  • 軽量磁気シリンダー『MaxLyte』2.png
  • 軽量磁気シリンダー『MaxLyte』3.png
  • cylinder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-flick cylinder

Non-flick cylinder

Non-flick cylinder

It is used for mechanical elements that require low friction and low hysteresis (low mechanical loss) during reciprocating motion of the equipment. ● Low mechanical loss and small mechanical hysteresis. ● Capable of producing long strokes. ● Easy maintenance. ● Simple structure with no failures due to entrapment of materials like rubber, which is a defect of conventional products. ● The sliding part of the cylinder is lubricated by a micro-leakage air film, resulting in low sliding resistance and minimal wear. ● Operates at low pressure. ● Long lifespan. The movable cylinder part is made of CFRP (carbon fiber reinforced pipe), making it lightweight.

  • cylinder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NEW Ultrasonic Metal Joining Machine - Dimensional Servo Precision Control - Expanding Joining Application Methods

NEW Ultrasonic Metal Joining Machine - Dimensional Servo Precision Control - Expanding Joining Application Methods

Direct bonding of small electrical components made of aluminum, copper, and different materials is possible. Ideal for laminated bonding of aluminum foil and copper foil! Achieve precise bonding of electrical components without solder and without resistance.

The "SONICS-MW Series" is an ultrasonic metal welding machine that achieves high response and precise control of ultrasonic output without loss, enabling extraordinary metal bonding through variable output during joining and motor pressure application. The ultrasonic oscillator is available in five frequencies: 15, 20, 30, 35, and 40 kHz, and supports a wide range of ultrasonic output from 500 to 4500 W, accommodating various metal bonding applications. 【Features】 ■ A low-cost running type based on an ultrasonic horn with a mainstream exchangeable tip system ■ High-pressure bonding is possible due to the unique ultrasonic horn function, with no distortion loss from high pressure ■ 1μm precision dimensional control using a linear encoder ■ Precise pressure control through servo motor pressure application and pneumatic control cylinder pressure application ■ Capable of bonding large components and dissimilar metals with various high-output ultrasonic machines ■ Suitable for bonding metal foils such as multilayer aluminum foil and copper foil due to diverse ultrasonic frequencies ■ Precise control of ultrasonic output enables stable airtight bonding, such as sealing copper pipes *For more details, please refer to the PDF documentation or feel free to contact us.

  • 画像1.png
  • 画像2.png
  • 画像3.png
  • Welding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Cylinder

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.