We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Darkroom.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Darkroom(10m) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

Darkroom Product List

1～30 item / All 69 items

Displayed results
Standard-compliant radio wave anechoic chamber (10m, 3m) / Simple radio wave anechoic chamber

Standard-compliant radio wave anechoic chamber (10m, 3m) / Simple radio wave anechoic chamber

Standard-compliant radio wave anechoic chamber (10m, 3m) / Simple radio wave anechoic chamber

Adopting the construction method using the "Pan Panel" technique, over 90% of the components can be reused during relocation, and it also boasts high-performance characteristics as a radio wave anechoic chamber. ■□■Features■□■ ■Especially superior in characteristics in the GHz band compared to other companies' anechoic chambers ■Products from Albatross (Germany) ■Radio wave absorbers from Emerson (Belgium) ■Automatic turntable and automatic antenna mast from Device (Japan) ■10m law radio wave anechoic chamber ■Applicable standards ・EN 50147-1; EN 55022; EN 61000-4-3 ・ANSI C63.4-2001, IEC 61000 ・CISPR 16, CISPR 22, CISPR 25 ・IEEE 299 ・MIL STD 461, MIL STD 285 ■For more details, please contact us.

  • Testing Equipment and Devices
  • Other environmental equipment
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Radio Wave Dark Room SAC-10 Plus Triton

Radio Wave Dark Room SAC-10 Plus Triton

There are no setup mistakes or damage to the equipment, so the cost performance is immeasurable!

The "SAC-10 Plus Triton Semi Anechoic Chamber 10m" fully complies with the standards for emission and immunity testing. It features multiple test axes at measurement distances of 10m, 5m, and 3m, along with a Φ3.0m Quiet Zone (QZ). Its polygonal shape and calculated layout of wave absorbers allow for the setup of multiple measurement axes within the chamber. In other words, it can maintain a state where the setup for emission and immunity tests is complete, eliminating the need for equipment adjustments due to changes in settings, which significantly reduces measurement time. 【Features】 ■ Fully compliant with EMI/EMS ■ Space-saving and compact polygonal design ■ Excellent performance with Frankonia's original Frankosorb wave absorbers *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electromagnetic Shielded Room SAC-10 Plus

Electromagnetic Shielded Room SAC-10 Plus

Fully compliant with EMI/EMS! Space-saving and compact chamber design with polygon shape.

The "SAC-10 Plus Semi Anechoic Chamber 10m" is an EMC radio anechoic chamber for evaluating automotive components. Its innovative polygonal shape and optimized absorber layout provide an efficient solution for space-saving and cost reduction. It fully complies with the standards for emission and immunity testing. Despite its compact size, it can meet various standard requirements. 【Features】 ■ High-performance solution compatible with measurement distances of 3.0m and 5.0m and QZ up to a maximum diameter of 3.0m ■ Large turntable can be introduced ■ Fully compliant with EMI/EMS ■ Space-saving and compact chamber design with a polygonal shape *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Radio Wave Dark Room SAC-10/H Hybrid

Radio Wave Dark Room SAC-10/H Hybrid

A highly customizable solution that supports various types of EMC testing!

The "SAC-10/H Hybrid Semi Anechoic Chamber 10m" is an electromagnetic shielded chamber that ensures a measurement distance of 10.0m and a maximum quiet zone (QZ) of Φ6.0m. It is highly adaptable, allowing for advanced customization that reflects customer requirements. It fully complies with the standards for emission and immunity testing. For individual standard compliance, please consult us as we can propose appropriate electromagnetic shielded chamber solutions that meet your requirements. 【Features】 ■ Highly customizable solution that accommodates various types of EMC tests ■ Fully compliant with EMI/EMS ■ Excellent performance with Frankonia's original Frankosorb electromagnetic absorber ■ Chamber design with optimized absorber lining *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Radio Wave Dark Room SAC-10V

Radio Wave Dark Room SAC-10V

An anechoic chamber with the potential to build a testing environment that goes beyond EMC testing!

The "SAC-10V Semi Anechoic chamber 10m" ensures various sizes of quiet zones (QZ) at a measurement distance of 10.0m. It is specialized for complete vehicle testing of automobiles equipped with dynamometers. By installing a second turntable at a distance of 10m, it enables various tests required for the development and verification of autonomous driving and connected cars, covering high-frequency bands. For example, it can adapt to test environments related to new technologies such as GPS, 4G, 5G, Wi-Fi, Lidar, radar, eCall, and TPMS, including communication tests between two vehicles and infrastructure tests. 【Features】 ■ Tests compliant with ECE R10.5 using a dynamometer ■ Fully compliant with EMI/EMS ■ Available with Frankosorb long pyramids or hybrid absorbers *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electromagnetic Shielded Room SAC-10/P Pyramid

Electromagnetic Shielded Room SAC-10/P Pyramid

Suitable for testing automotive and military specifications! Double measurement axis solution.

The "SAC-10/P Pyramid Semi Anechoic Chamber 10m" features a measurement distance of 10.0m and a maximum quiet zone (QZ) of Φ6.0m, equipped with a unique long pyramid-shaped absorber layout. Highly adaptable, it allows for advanced customization reflecting customer requirements. It fully complies with the standards for emission and immunity testing. For individual standard compliance, we can propose appropriate electromagnetic shielded room solutions that meet your requirements, so please feel free to consult with us. 【Features】 ■ Highly customizable solution for various types of EMC testing ■ Fully compliant with EMI/EMS ■ Excellent performance with Frankonia's original Frankosorb electromagnetic absorbers ■ Chamber design with optimized absorber lining *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LiDAR Target Simulator(LTS)

LiDAR Target Simulator(LTS)

A simulator essential for the development of advanced autonomous driving at Level 3 and above.

The "LiDAR Target Simulator (LTS)" is a simulator that enables performance evaluation of LiDAR, which is expected to become widely adopted in vehicles with autonomous driving levels 3 and above, in short-range environments such as indoors and test benches, similar to millimeter-wave radar and visible cameras. It supports the point cloud and scanning methods of recent LiDAR systems and returns laser groups according to the width and height of the target. 【Features】 - High precision and space-saving for evaluation through real vehicle driving tests - Pulse delay using optical delay circuits (delay distance: 10 to 66m) * Optional support for up to 100m - Customization is possible for detailed specifications *For more information, please download the PDF or feel free to contact us.

  • simulator
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMC standard compliance testing in a 10m anechoic chamber

EMC standard compliance testing in a 10m anechoic chamber

Providing high-quality services for EMC standard compliance testing, noise analysis, and noise countermeasures to our customers!

In July 2023, the 10-meter anechoic chamber at the EMC Lab (formerly known as SEIWA EMC Technical Center) located within the headquarters factory in Joyo City, Kyoto Prefecture, was accredited as an ISO/IEC 17025:2017 testing laboratory. This accreditation allows for a one-stop service from preliminary testing to the creation of EMC compliance test reports. In conjunction with this, we have started accepting applications for "EMC compliance testing" using the same facility. With a robust system supported by various countermeasure materials and experienced staff, we can conduct both preliminary tests and compliance tests in the same environment. Please feel free to contact us if you have any inquiries. *For more details, please refer to the PDF document or feel free to reach out to us.*

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMC Anechoic Chamber Catalog [A lineup of high-standard anechoic chambers!]

EMC Anechoic Chamber Catalog [A lineup of high-standard anechoic chambers!]

We are currently offering a catalog featuring a lineup of high-standard anechoic chambers! It also includes a 10-meter method anechoic chamber that complies with international standards!

The "EMC Electromagnetic Wave Anechoic Chamber Catalog" is a product catalog from Japan ETS Lindgren Co., Ltd., which engages in the sale of electromagnetic wave measurement systems and products, as well as the design, construction, and performance evaluation measurement of test chambers. It features a wide range of products, including the "FACT10 Series," a 10-meter anechoic chamber compliant with international standards for EMC compliance testing, as well as the compact anechoic chamber "Space Saver Series" and the "Reverberation Chamber SMART Series." [Featured Products] ■ 10m Anechoic Chamber FACT10 ■ 3m Anechoic Chamber FACT3 ■ Compact Anechoic Chamber Space Saver ■ Anechoic Chamber for Automotive Parts Evaluation FACT25 ■ Anechoic Chamber for MIL-STD-461 MIL-STD-461 Chamber *For more details, please request the materials or view the PDF data available for download.

  • Testing Equipment and Devices
  • Other environmental equipment
  • others
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
10m Law Electromagnetic Wave Anechoic Chamber

10m Law Electromagnetic Wave Anechoic Chamber

Ideal for various EMC measurements! We have signed a business collaboration agreement with Japan Shield Enclosure.

The "10m Law Radio Wave Anechoic Chamber" is a facility that can be used for EMI/EMS certification testing. It is compatible with various international standards such as EC, FCC, CISPR, and VCCI. The dimensions and specifications of the anechoic chamber and measurement room can be modified to suit the EUT. Optional equipment such as communication devices, disaster prevention equipment, and power supplies are available. We can design the performance according to your usage environment and meet your requirements. 【Features】 ■ Compatible with various international standards such as EC, FCC, CISPR, and VCCI ■ Dimensions and specifications of the anechoic chamber and measurement room can be changed to suit the EUT ■ Radio absorbers can be selected according to the frequency bands and standards being measured ■ Equipped with various ancillary facilities, enabling measurements tailored to specific purposes and applications *For more details, please refer to the PDF document or feel free to contact us.

  • 2023-06-20_17h25_54.png
  • 2023-06-20_17h25_58.png
  • 2023-06-20_17h26_06.png
  • 2023-06-20_17h26_10.png
  • 2023-06-20_17h26_14.png
  • 2023-06-20_17h26_19.png
  • Testing Equipment and Devices
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Business Introduction: "EMC Business"

Business Introduction: "EMC Business"

We provide an efficient environment that matches time and workability.

Ishikawa Co., Ltd.'s EMC Division is an EMC testing laboratory that offers measurements and solutions proposed by skilled staff. We own facilities such as a 10m anechoic chamber equipped with a newly developed grid-type ferrite tile. We are officially compliant with standards such as VCCI-CISPR 32, ANSI C63.4-2014, and EN55032:2012 (CISPR32:2012), so please feel free to consult us if you have any requests. 【Business Contents】 ■EMC Testing 　・EMC compliance testing for various countries (witness testing, commissioned testing) 　・EMI countermeasure measurements (witness measurements, commissioned measurements) 　・Application services for various countries 　・Preparation of test result reports *For more details, please download the PDF or feel free to contact us.

  • Other contract services
  • Public Testing/Laboratory
  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Smart Inclination Meter 'Nando°'

Smart Inclination Meter 'Nando°'

"Check and share on smartphones and tablets" Accelerate slope measurement with data-driven "visualization"!

- Measure the angle of the target and display the results on a smartphone or tablet screen. - Data can be transferred via Bluetooth up to a distance of 50 meters (measured), allowing information sharing across multiple devices. - It can also be used in conjunction with an optional pole mounting fixture during pole installation work. *To use this, the companion application "Smart Inclinometer" must be installed. iOS version of the application "Smart Inclinometer": https://00m.in/HFDGx Android version of the application "Smart Inclinometer": https://00m.in/4aqje

  • Nando°パンフレット_page-0002.jpg
  • nando3.jpg
  • nando4.png
  • Other measurement, recording and measuring instruments
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SX1 set (magnetic field and electric field probe)

SX1 set (magnetic field and electric field probe)

It is possible to inspect IC pins, conductive paths, components, and connectors, and identify interference sources!

The "SX1 Set (Magnetic and Electric Field Probes)" includes three passive magnetic field probes and one dedicated cable. It is capable of measuring electric and magnetic fields in the high clock frequency range of 1GHz to 10GHz on electronic assemblies and ICs during the development process. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded due to the current-damping sheath. 【Set Contents】 ■SX-E 03: E-Field Probe 1GHz–10GHz ■SX-B 3-1: H-Field Probe 1GHz–10GHz ■SX-R 3-1: H-Field Probe 1GHz–10GHz ■SMA-SMA: 1m Cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Frequency Module "DFS Signal Generator"

High Frequency Module "DFS Signal Generator"

Compact the necessary functions and place them on your desk! Connect the USB cable to your computer, and it operates on USB bus power!

The RF022 "DFS Signal Generator" is a super compact and lightweight 6GHz high-frequency signal generation module that connects to a Windows PC via USB. 【Features】 ■ Compact size (105 (W) × 55 (D) × 19 (H) mm) ■ DFS signal output function Compliant with radio wave laws (TELEC-T403/FCC 13-22) ■ Wideband: 25–6000MHz ■ Easy operation on Windows PC (USB connection) *For more details, please download the PDF or feel free to contact us.

  • Other electronic parts
  • Signal Generator
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Radio frequency shielded room for large equipment such as construction machinery.

Radio frequency shielded room for large equipment such as construction machinery.

The enforcement of standards related to construction machinery and the electrification will accelerate in the future. You can rely on us for EMC testing of construction machinery.

A new EMC testing facility equipped with a large equipment electromagnetic wave anechoic chamber has started operations within UL Japan's Ise headquarters in Ise City, Mie Prefecture. <Acceleration of Electrification in the Construction Machinery Industry> To improve on-site safety and address labor shortages, the introduction of ICT and electrification in construction machinery is progressing. As construction machines are increasingly equipped with numerous electronic components, the importance of EMC (electromagnetic compatibility) testing is rising to prevent accidents caused by electromagnetic noise and interference. <Enforcement of Standards Related to Construction Machinery> In 2021, the enforcement of the latest standards for construction machinery, "EN ISO 13766-1, 2:2018," is scheduled. This enforcement will expand the upper frequency limit for radiated immunity and require electromagnetic wave exposure to the construction machinery body. In Europe, a standard transition is planned for 2021, and compliance with the latest standards will be necessary when launching products.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vibration and Temperature Prognostic Monitoring System 'vibInsight'

Vibration and Temperature Prognostic Monitoring System 'vibInsight'

Achieving data collection from a wide range! Monitoring system adopting a wireless relay network method.

"vibInsight" is a vibration and temperature predictive monitoring system that utilizes a wireless relay transmission system to enable data collection from a wide range. The cause of equipment and rotating machinery failures is nearly half due to bearing failures. By regularly measuring peak values and checking trends, it is possible to detect anomalies. Furthermore, with a response frequency of 20kHz, it captures signals from low to high speeds without loss and converts them into electrical signals. 【Features】 ■ Data collection from multiple buildings and multiple floors is possible with MAX10 relay stages. ■ Data can be collected beyond just bearing vibrations: - Ambient temperature - Current ■ New sensor designs can also be added. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other FA equipment
  • Production Management System
  • Other network tools
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF1 set (magnetic field and electric field probes)

RF1 set (magnetic field and electric field probes)

It is possible to measure electric and magnetic fields from 30MHz to 3GHz on electronic assemblies during the development process!

The "RF1 Near-Field Probe Set" includes four passive magnetic field probes and one dedicated cable. The probe heads in this set allow for measurements very close to electronic assemblies. It can inspect IC pins, conductive paths, components, and connectors, and identify sources of interference. 【Set Contents】 ■RF-K 7-4: H-Field Probe 30MHz to 1GHz ■RF-U 2.5-2: H-Field Probe 30MHz to 3GHz ■RF-R 3-2: H-Field Probe 30MHz to 3GHz ■RF-E 10: E-Field Probe 30MHz to 3GHz ■SMB-BNC: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to e-Otama Co., Ltd. "Yamanashi EMC Center"

Introduction to e-Otama Co., Ltd. "Yamanashi EMC Center"

A testing laboratory equipped with emission and immunity facilities capable of testing large machinery.

At e-Otama Co., Ltd.'s "Yamanashi EMC Center," we can conduct EMC testing for large equipment (with a power capacity of up to 100A, a weight of 4.5 tons, and dimensions of approximately 3m on each side). We have an ideal open site that emphasizes data reproducibility, along with a comprehensive range of peripheral devices and facilities. 【Features】 ■ Usage fees are lower than those of an anechoic chamber, and measurement times are almost the same as in the chamber. ■ Data correlation between testing facilities is significantly better than in an anechoic chamber. ■ High level of completeness used as a standard for the construction of EMC regulatory authority sites in Asian countries. *For more details, please download the PDF or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
XF1 Set (Magnetic Field and Electric Field Probe)

XF1 Set (Magnetic Field and Electric Field Probe)

Can be connected to a 50Ω input spectrum analyzer or oscilloscope!

The "XF1 Near-Field Probe Set" includes four magnetic field probes, one electric field probe, and one dedicated cable. It is capable of measuring electric and magnetic fields from 30MHz to 6GHz on electronic assemblies during the development process. Due to its impedance matching, the sensitivity in lower frequency ranges is lower than that of RF-type probes. 【Set Contents (Partial)】 ■XF-R 400-1: H-Field Probe 30MHz–6GHz ■XF-R 3-1: H-Field Probe 30MHz–6GHz ■XF-B 3-1: H-Field Probe 30MHz–6GHz ■XF-E 10: E-Field Probe 30MHz–6GHz ■XF-U 2.5-1: H-Field Probe 30MHz–6GHz ■SMA-SMA: 1m Cable *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Noise Vision - Electromagnetic Shielded Room Rental Service

Noise Vision - Electromagnetic Shielded Room Rental Service

Please leave the measures and considerations regarding antenna radiation emission and noise terminal voltage before certification to Wave Technology!

With the acceleration of machinery, there is a growing trend for EMI (Electro-Magnetic Interference) countermeasures to take up a larger proportion in the product development process. In such a situation, are you having trouble securing an anechoic chamber or engineers for EMI countermeasures and verification?

  • Contract measurement
  • EMC Testing
  • Rental/lease
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electric Field Probe "FL8000 Series"

Electric Field Probe "FL8000 Series"

Capable of measuring CW and pulse modulation with a single unit.

The new AR probe "FL8000 series" covers a frequency range of 5 kHz to 60 GHz and an electric field strength of 0.3 to 1000 V/m. It achieves a wide frequency range and dynamic range, simplifying your testing with just one device. By using a laser to supply power through fiber, continuous operation is possible without the need for battery recharging or replacement. *For more details, please refer to the PDF. Feel free to contact us as well.

  • Ammeter
  • Analytical Equipment and Devices
  • probe
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Radio Wave Dark Room CTC Component Chamber

Radio Wave Dark Room CTC Component Chamber

The Frankosorb hybrid electromagnetic wave absorber is arranged in an optimal layout for the ferrite absorption material lining!

The "CTC Component Testing Chamber" is a customized component testing chamber solution by Frankonia for immunity testing of commercial products, automotive parts, and military components. It is compliant with CISPR 25 and ISO 11452 for automotive parts testing at a test distance of 1.0m, as well as MIL-STD 461 and DO-160 testing at the same distance. Additionally, it meets the compliance requirements of IEC EN 61000-4-3 at a measurement distance of 3.0m. 【Features】 ■ A compact chamber solution for component testing compliant with CISPR 25 and MIL-STD 461/DO-160 ■ EMS measurements fully compliant with IEC/EN 61000-4-3 ■ Excellent performance with Frankonia's original Frankosorb electromagnetic wave absorber ■ Compact chamber design with optimized absorber lining ■ Turnkey solution *For more details, please refer to the related links or feel free to contact us.

  • EMC Testing
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coupling/Decoupling "FP-SURGE 100M2"

Coupling/Decoupling "FP-SURGE 100M2"

Surge/ring wave CDN (manual)! The rated current is 0 to 100A.

We would like to introduce our coupling/decoupling device, 'FP-SURGE 100M2'. Surge/ringing wave CDN (manual). Current range 0-100A AC/DC, compliant with IEC 61000-4-5 Ed.3 and ANSI C62.41. The maximum AC voltage is 50/60Hz, 690V (phase-to-phase) / 400V (phase-to-neutral). Please feel free to contact us if you have any inquiries. 【Features】 ■ Surge/ringing wave CDN (manual) ■ Current range 0-100A AC/DC, compliant with IEC 61000-4-5 Ed.3 and ANSI C62.41 ■ Maximum AC voltage 50/60Hz, 690V (phase-to-phase) / 400V (phase-to-neutral) ■ 8kV pulse voltage * You can download the German version of the catalog. * For more details, please feel free to contact us.

  • Other network tools
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LF1 set (magnetic field probe)

LF1 set (magnetic field probe)

Using high-resolution probes such as LF-B 3, LF-U 5, and LF-U 2.5 to detect interference sources more accurately!

The "LF1 Near-Field Probe Set" includes four magnetic field probes and a dedicated cable, allowing for the measurement of longwave, mediumwave, and shortwave frequencies emitted from electronic devices during the development process. The probe heads in this set are designed to progressively detect electromagnetic interference sources from IC pins to large components on the assembly. They can be connected to a spectrum analyzer or oscilloscope with a 50Ω input. 【Set Contents】 ■LF-R 400: H-Field Probe 100kHz to 50MHz ■LF-B 3: H-Field Probe 100kHz to 50MHz ■LF-U 2.5: H-Field Probe 100kHz to 50MHz ■LF-U 5: H-Field Probe 100kHz to 50MHz ■SMB-BNC: 1m Cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Microwave and millimeter wave measurement anechoic chamber

Microwave and millimeter wave measurement anechoic chamber

Completely customized to your requests! We propose suitable sizes according to your usage and installation location.

We would like to introduce the "Microwave and Millimeter Wave Measurement Anechoic Chamber" that we handle. The size starts from approximately W3000×D2000×H2400mm, and we can suggest suitable sizes based on the application and installation location. It features a wide frequency range from 100MHz to 500GHz and simulates QZ size and anechoic characteristics. 【Features】 ■ Completely customizable according to your requirements ■ Wide frequency range (100MHz to 500GHz) ■ Optimization of QZ ■ Proposals including antennas, antenna masts, turntables, and measurement software *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF-E 09 (E field electric field probe)

RF-E 09 (E field electric field probe)

The same basic structure as the "RF-E 03" and "RF-E 04" probes!

The RF-E 09 electric field probe is a passive near-field probe designed for use with scanners manufactured by Langer. The electrodes of the probe head detect separated electric fields on the surface of ICs. It functions well within a distance of 0.5 to 10 mm from the assembly. By placing and holding small square electrode surfaces on components or printed circuit boards, it can detect sources of electrical interference. 【Specifications】 ■ Type: Near-field probe ■ Size: 10x10 mm probe head ■ Frequency range: 30 MHz to 3 GHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Millimeter wave anechoic chamber

Millimeter wave anechoic chamber

Millimeter-wave anechoic chamber usable for performance evaluation of millimeter-wave collision avoidance radar, etc.

We handle a millimeter-wave anechoic chamber that can be used for performance evaluation of millimeter-wave collision avoidance radar, which is becoming standard in the automotive market. With the installation of a traverse (moving rail), we offer options that allow for a certain degree of flexibility in measurement distance, and we can respond flexibly with equipment tailored to your needs. Additionally, we provide a total solution along with a target simulator (our own MRT7681) that can simulate objects for the radar. 【Specifications Example】 ■ Dimensions: 3,200×6,200×3,200mm ■ Frequency Range ・800MHz to 40GHz ・75GHz to 110GHz ■ Test Range: Approximately 4,000mm QZφ1,000mm ■ Anechoic Characteristics ・800MHz -30dB ・1GHz -35dB ・3GHz to 110GHz -45dB *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
XF-E 09s (E field electric field probe)

XF-E 09s (E field electric field probe)

Compact and very easy to use, and with the current attenuation sheath, it is electrically well shielded!

The "XF-E 09s" electric field probe is a passive near-field probe. The electrodes of the probe head detect separated electric fields on the surface of the IC. It works well within a distance of 0.5 to 10 mm on the assembly. It has the same basic structure as the "XF-E 04s" probe, but by placing and holding small square electrode surfaces on components or printed circuit boards, it can detect sources of electrical interference. 【Specifications】 ■ Type: Near-field probe ■ Size: 10x10mm probe head ■ Frequency range: 30MHz to 6GHz ■ Connector: SMA female, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LF-R 50 (H field magnetic field probe)

LF-R 50 (H field magnetic field probe)

The larger head allows for the detection of larger components as potential sources of interference!

The "LF-R 50 Magnetic Field Probe" is a passive near-field probe with a head size of 10mm in diameter, designed to measure assemblies, devices, or cables up to 3cm away. This product offers performance that is intermediate between the "LF-R 400" and "LF-R 3" probes in terms of diameter, sensitivity, and resolution. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded due to the current-damping sheath. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ10mm Probe Head ■ Frequency Range: 100kHz to 50MHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Distant Realm Spiral 'TC-93061A'

Distant Realm Spiral 'TC-93061A'

The supported frequency range is 700 to 7500 MHz! It enables a reduction in measurement time and costs.

The TC-93061A is an ultra-compact, wideband far-field spiral. The far-field type is used at a distance of 50 to 200 mm from the DUT. Accurate positioning is not required, but it is recommended for use in medium to large shielded boxes. The supported frequency range is 700 to 7500 MHz, and the dimensions (WxDxH) are 106x130x15.6 mm. Custom manufacturing is also possible to accommodate changes in the movable range, so please feel free to consult us. 【Features】 - Suitable for measurements inside medium to large shielded boxes - Well-equipped dedicated fixtures for polarization switching and XYZ axis position adjustment - Reduction of measurement time and cost - Ultra-compact - Wideband *For more details, please refer to the related links or feel free to contact us.

  • Other electronic parts
  • Darkroom

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Darkroom

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.