Dehydrator Product List and Ranking from 153 Manufacturers, Suppliers and Companies

Concrete mirror finish construction method - Cosmo MRA floor store construction case study

The evolved version of concrete mirror finish, "Cosmo MRA Floor," allows you to directly experience its astonishing luster and shine! (Installed in February 2007)

Brand shop in Omotesando and Ura-Harajuku, Shibuya Ward. The concrete floor of this store features the advanced "Cosmo MRA Floor" with a concrete mirror finish. At the request of the store owner, the Cosmo MRA Floor was chosen to immediately showcase the luster and shine characteristic of the concrete mirror finish to customers after the store handover. This is a prime example of a high-quality, luxurious floor that does not resemble a typical concrete floor, completed just in time for the store opening. If you are in the area, please do stop by.

Company：コスモトレードアンドサービス
Price：Other

others
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fully Automatic Dehydrator "WAP Type" Filter Press [Free Dehydration Evaluation Test!]

The fully automatic dewatering machine WAP type filter press can handle compact and large-capacity slurries! 【Free dewatering evaluation test!】

The fully automatic WAP-type filter press is a compact filter press equipped with a pressing mechanism that can process large volumes of slurry automatically. With its "pressing mechanism + unique sludge simultaneous discharge mechanism," it filters only for the optimal time for efficient filtration, allowing it to handle amounts of slurry that are unimaginable when comparing performance based on typical chamber capacities. Additionally, all tedious tasks such as opening the frame, moving the filter plates, and scraping off the sludge are performed automatically, making operation simple and safe without burdening the operator. ◆ Each cycle takes about 30 minutes, allowing for significant dewatering of a large amount of slurry despite its small size. ◆ The sludge undergoes further air drying after dewatering through pressing, which can further reduce the moisture content. ◆ Compared to non-pressing dewatering machines, it can significantly reduce sludge disposal costs. ◆ The sludge discharge utilizes a unique cloth travel system that discharges quietly without causing mechanical stress. *For more details, please download the quotation request form and contact us. We will provide information on pricing and delivery times.

Company：日本ワコン環境装置事業部
Price：Other

Other water treatment equipment
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Double Roof Construction "Relief Method"

A roof that is revived just by being covered! It solves the problems of deteriorated roofs in factories, warehouses, etc., without stripping them away.

The "Relief Method" is a double roofing construction that revitalizes your building by covering deteriorated slate roofs or rusted steel roofs with new steel plates. You can choose between two construction methods according to your needs: the "Direct Method," which involves directly fastening new steel plates to the existing roof with screws, and the "Indirect Method (Dust-Free Method)," which secures new steel plates using special fittings without making holes in the existing roof. For any issues or troubles related to roofs, walls, or floors of factories, warehouses, commercial facilities, etc., please consult Shiroki Corporation. 【Features】 ■ Extends the life of roofs and buildings ■ Construction without removing the existing roof ■ Insulation effect ■ Waterproofing effect ■ Increased strength *For more details, please refer to the PDF materials or feel free to contact us.

Company：シロキコーポレーション
Price：Other

others
Dehydrator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floor Coating Work "Floor RI Coat"

We will propose the best flooring renovation tailored to your concerns and the purpose and environment of the room!

We would like to introduce Shiroki Corporation's flooring construction "Floor RI Coat." Starting with the standard "epoxy pouring method" that accommodates a wide range of applications, we also offer the "roller method," which excels in dust resistance and quick drying, as well as the high-grade "hard urethane method," which has excellent elongation and impact resistance. Through the combination of superior coatings and excellent methods, we deliver truly high-quality products to our customers. We will propose the best flooring renovation tailored to your company's needs and the room's purpose and environment. Please feel free to consult us when needed. 【Lineup】 ■ Epoxy pouring method ■ Roller method ■ Water-based roller method ■ Hard urethane method ■ Water-based hard urethane heat-resistant method ■ Stain-resistant coat *For more details, please refer to the PDF materials or feel free to contact us. The latest catalog can be found here: ↓ ↓ ↓ https://kankyo-shiroki.com/dr/catalog.php

Company：シロキコーポレーション
Price：Other

others
Dehydrator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Centrifugal dehydrator "HED"

Promoting low drug injection rates and low moisture content, achieving CO2 emission reduction and energy-saving measures! Introducing a low-power, high-efficiency centrifugal dewatering machine!

This product is a HED-type centrifugal dehydrator that meets the themes of the times by pursuing energy saving, labor saving, high performance, low maintenance, and consideration for the environment. It is equipped with a power regeneration system, automatic torque control, and micro-differential control. By significantly reducing power consumption and promoting low chemical dosage and low moisture content, it also contributes to a substantial reduction in CO2 emissions, alleviating the burden on the natural environment. With its compact design, it achieves space-saving and promotes complete automation. 【Features】 ■ Equipped with a power regeneration system, automatic torque control, and micro-differential control ■ Significantly reduces power consumption ■ Promotes low chemical dosage and low moisture content ■ Reduces the burden on the natural environment ■ Promotes complete automation *For more details, please refer to the PDF document or feel free to contact us.

Company：巴工業本社
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Swimsuit dewatering machine "HSD-7 series" with built-in sterilization and deodorization unit.

Industry share No.1! Fast, quiet, compact! High-speed dehydrator for swimsuits that can complete in about 5 seconds.

Powerful yet quiet dehydration! Space-saving and compact! Dehydration that can be installed anywhere has been achieved with a dedicated water storage tank set. By using the sterilization and deodorization unit, you can take home clean and safe swimwear. There is overwhelming technological strength that keeps competitors at bay and about 30 years of accident-free reliability.

Company：長野テクトロン本社
Price：Other

others
Dehydrator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rental of dewatering machines that can be selected according to the site.

Solve on-site "troubles" with rental dewatering machines.

We offer dewatering machine rentals for temporary and condition-different water treatment sites, such as disaster and emergency response, temporary construction, and verification operations before permanent installation. Based on the characteristics of the treated water, treatment volume, and operational conditions, we will select and propose the appropriate dewatering method. ＼If you have any of the following issues, please consult with us／ ■ An urgent need for "immediate treatment" due to emergencies, disasters, or temporary construction ■ Want to treat for a certain period or a specific volume (temporary water treatment / limited-time operation) ■ Want to verify "water quality / treatment volume" with actual equipment before permanent installation (test operation) ■ Unsure of the appropriate dewatering method for the characteristics of the treated water and would like assistance with equipment selection 【Product Lineup】Dewatering methods selected based on site conditions ■ Multi-plate screw press: Organic / space-saving / simple operation / 75-85% ■ Belt press: Organic and inorganic / continuous large-scale processing / 75-85% ■ Filter press: Inorganic / high dewatering required / 50-65% ■ Roll type: Inorganic / small scale / 70-75% As a water treatment engineering manufacturer, we provide careful support from selection to operation.

Company：流機エンジニアリング
Price：Other

Sludge treatment equipment and technology
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-plate screw press dewatering machine | DRE-TSP-R series

Low cost, space-saving, maintenance-free high-performance screw press dewatering machine.

The DRE-TSP-R series sludge dewatering machine is a high-performance screw press dewatering machine that achieves higher dewatering performance than conventional types. ■ Multi-plate screw press (DRE-TSP-131-R) Designed for organic sludge, it features an energy-saving and space-saving structure that is resistant to clogging, along with an automatic cleaning mechanism, making it suitable for temporary sites (moisture content 75-80%). 【Features】 ■ Compact design, easy installation Achieves space-saving. After installation, only piping and power connection are required. ■ Energy-saving, low noise, low vibration Utilizes a low-speed rotating motor, considering environmental and safety aspects. It reduces running costs by consuming less power and eliminating the need for cleaning water. ■ Maintenance-free The auto-cleaning mechanism prevents clogging, allowing for 24-hour unmanned operation. ■ Short delivery time and specification changes Shortest delivery time (within 60 days) and accommodates design and electrical specification changes to fit the site. As a water treatment engineering manufacturer, we provide careful support from selection to operation.

Company：流機エンジニアリング
Price：Other

Sludge treatment equipment and technology
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Belt Press Dewatering Machine | DRE-BPD1 Series

High-capacity processing, simple structure, continuous operation possible - belt press dewatering machine.

The belt press dewatering machine is a continuous dewatering device that sandwiches sludge between two filter cloths and gradually compresses it with rollers. ■ Belt Press (DRE-BPD1-500K) Compatible with both organic and inorganic sludge, it allows for large-scale processing through continuous operation (75-80%). 【Features】 ■ Continuous Dewatering Method By sandwiching sludge between two filter cloths and compressing it gradually with multiple rollers, stable continuous operation is possible. ■ Wide Range of Sludge Compatibility It can handle both organic and inorganic sludge and is applicable to various wastewater treatment facilities. ■ Moisture Content of 75-80% Depending on the characteristics of the sludge and chemical dosing conditions, dewatering can achieve a moisture content of approximately 75-80% as a guideline. ■ Ideal for Large-Scale Processing The simple structure allows for easy maintenance and management. It is suitable for continuous operation and can accommodate large-scale processing. As a water treatment engineering manufacturer, we provide careful support from selection to operation.

Company：流機エンジニアリング
Price：Other

Sludge treatment equipment and technology
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Roll-type Dehydrator | DRE-R Series

Stability performance, fully automatic driving, space-saving design roll-type dewatering machine.

This is a dewatering machine that folds roll-shaped non-woven fabric into the machine and performs pressure filtration and air-drying dewatering. It exhibits stable processing performance and can be installed in a space-saving manner. ■ Roll Type (DRE-R4L) Suitable for inorganic sludge, allowing for space-saving and stable filtration (70-75%). 【Features】 - Pressure filtration and air-drying dewatering method By using roll-shaped non-woven fabric and combining pressure filtration with air-drying dewatering, stable dewatering treatment is achieved. - Main target sludge: Inorganic sludge It is suitable for the treatment of inorganic sludge and demonstrates reliable dewatering performance. - Stable performance Due to its structure that always uses new filter paper, if good results are obtained in laboratory tests, stable processing can be achieved in actual machines. - Fully automatic operation possible It supports automatic operation, contributing to labor reduction. *Manual replenishment is required when the filter paper runs out. - Space-saving design The compact design allows it to fit into limited installation spaces. As a water treatment engineering manufacturer, we provide careful support from selection to operation.

Company：流機エンジニアリング
Price：Other

Sludge treatment equipment and technology
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sample Available] Electrostatic Discharge Floor Finish Agent 'Statguard(R)'

[Sample Available] Efficiently removes static electricity! A floor finishing agent that transforms regular floors into anti-static floors.

"Statguard(R)" is an anti-static floor finishing agent that can reduce static electricity generated by friction during walking to below 100V. When using a foot grounder, it efficiently removes static electricity generated by the human body. It transforms ordinary floors that do not have anti-static measures into anti-static floors. It can be used on a variety of flooring materials, including vinyl floors, vinyl composition floor tiles, linoleum floors, rubber floors, epoxy floors, acrylic coated floors, and concrete floors. [Features] - Efficiently removes static electricity - Coating with RTT: 1×10^7Ω to 1×10^10Ω Complies with ANSI/ESD S7.1 and ESD TR53 - Application coverage: approximately 50m²/ℓ - Usable on many flooring materials - Made in the USA For more details, please refer to the catalog or feel free to contact us.

Company：原貿易
Price：Other

Coating Agent
Anti-static products
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance dewatering machine 'Screw Press'

Significant reduction in electricity and maintenance costs! A labor-saving "sludge dewatering device" capable of fully automatic operation.

The "Screw Press" is a high-performance dewatering machine for sludge and residues. In addition to low installation and maintenance costs, it significantly reduces power consumption. With a high dewatering rate, it requires almost no wash water! There is also no noise. It is particularly suitable for dewatering sludge, food, and chemicals. 【Applications】 ■ As a dewatering machine for sludge 　→ Various types of sludge (excess activated sludge, sewage sludge, construction sludge, digested sludge, etc.) 　→ Pressurized floating scum 　→ Industrial waste treatment facilities ■ As a dewatering machine for various residues 　→ Dewatering food residues (tea lees, coffee grounds, beer lees, vegetable residues, sugarcane, etc.) and other residues *The catalog can be viewed immediately from the "Download" section.

Company：Tsukishima Kikai Co., Ltd.
Price：Other

Filtration Equipment
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Energy-saving & compact centrifugal dehydrator "Whitman"

It is a compact and space-saving design screw discharge high-performance continuous centrifugal dehydrator.

Compact and space-saving design screw discharge high-performance continuous centrifugal dehydrator. This dehydrator is suitable for drying raw materials in the manufacturing process of minerals, especially tantalum, with particle sizes of 10mm or less. It features continuous operation, low power consumption, high processing capacity, excellent dehydration performance, and a compact and space-saving design.

Company：コトブキ技研工業
Price：Other

Other processing machines
Drying Equipment
centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Foreign matter contamination prevention function recognized by the pharmaceutical industry: Upper discharge centrifugal dehydrator KM

Preventing foreign matter contamination with a wealth of delivery experience and long-standing know-how in the pharmaceutical manufacturing industry. An easy-to-use top discharge centrifuge with simple operation.

A centrifuge dewatering machine that utilizes centrifugal force thousands of times greater than gravity to separate, filter, and dehydrate materials. With a wealth of delivery experience in the pharmaceutical manufacturing industry, it is equipped with mechanisms specialized for preventing foreign matter contamination. ◎ Excellent Cleanability (1) Casing Opening and Closing Mechanism Without a casing opening and closing mechanism, it is necessary to remove bolts and lift the casing for internal cleaning. (2) Flat Basket If the basket is not flat, it is necessary to remove the basket from the main shaft and lift it for cleaning the bottom of the basket. Thanks to the mechanisms in (1) and (2), what used to take a day for machine cleaning and cleaning confirmation can now be completed in about 2 hours, achieving a time reduction of 91.6%. ◎ Suitable for Processing a Variety of Small Quantities It is easy to confirm cleaning, and cleaning time can be shortened, making it suitable for small-batch production of various types. ◎ Complete Recovery of Processed Materials Using Bag-Type Filter Cloth By using bag-type filter cloth, it is possible to recover all product amounts, resulting in no loss. ◎ Proposing Suitable Specifications According to Applications and Usage Conditions We will confirm the usage methods and conditions, and our engineers will design and create custom-made solutions from scratch.

Company：Matsumoto Machine Sales Co., Ltd.
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Aiming to Reduce Drying Time for Metal Parts [Metal Parts Manufacturer]

"I want to shorten the drying time of metal parts." A dehydrator that can quickly and easily remove moisture from metal parts with complex shapes.

■We want to shorten the drying time for metal parts From O Company, a manufacturer of metal parts: "After washing the work (complex-shaped metal parts), we dehydrate them in a centrifuge, but the drainage is poor. We want to somehow improve the dehydration efficiency and shorten the drying time after dehydration." Based on this discussion, we proposed and delivered a small parts dehydrator. 【POINT】Unique operating program ■ We proposed a unique operating program different from the conventional methods of dehydrators. The drying time was reduced by 34%. The metal parts we examined were small, about 2 to 5 cm, and we felt that "there must be a lot of residual moisture even with centrifugal force." To reduce the residual moisture, we proposed a unique program that allows for special movements in addition to the normal operating method. We suggested a specification that allows rotation in both the forward and reverse directions. ↓ Please check the basic information for more details.

Company：Matsumoto Machine Sales Co., Ltd.
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dehydrator for silk reeling and spinning.

A centrifugal dewatering machine that allows for smooth dewatering and extraction during silk reeling and spinning.

The dehydration during silk reeling and spinning is performed most efficiently using centrifugal force, and the rotation speed can be controlled to match the product for the best results. ◎ Excellent cleaning properties prevent contamination from foreign substances. (1) Casing opening and closing mechanism If there is no casing opening and closing mechanism, it is necessary to remove bolts and lift the casing for internal cleaning. (2) Basket flatness If the basket is not flat, it is necessary to remove the basket from the main shaft and lift it for cleaning the bottom of the basket. Thanks to the mechanisms in (1) and (2), what used to take a day for machine cleaning and confirmation can now be completed in about 2 hours, achieving a time reduction of 91.6%. ◎ We can manufacture machines in the desired size to match the product dimensions. ◎ We have a track record of integrated operation with robots. We will also propose special baskets, lifters for extraction, and efficient operating methods. ◎ We propose optimal specifications tailored to the application and usage conditions. Our engineers will confirm the usage methods and conditions, and design and manufacture custom solutions from scratch.

Company：Matsumoto Machine Sales Co., Ltd.
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dehydrator for fiber dyeing

A centrifuge that allows for smooth dehydration and extraction during fiber dyeing.

The dehydration during fiber dyeing can be performed most efficiently using centrifugal force, and the rotation speed can be controlled to match the product for the best results. ◎ Excellent washability prevents contamination from foreign substances. (1) Casing opening and closing mechanism If there is no casing opening and closing mechanism, it is necessary to remove bolts and lift the casing for internal cleaning. (2) Basket flatness If the basket is not flat, it is necessary to remove the basket from the main shaft and lift it for cleaning the bottom of the basket. Thanks to the mechanisms in (1) and (2), what used to take a day for machine cleaning and verification can now be completed in about two hours, resulting in a 91.6% reduction in time. ◎ We can manufacture machines in your desired size to match the product dimensions. ◎ We have a track record of operating in conjunction with robots. We will also propose special baskets, lifters for retrieval, and efficient operating methods. ◎ We propose the optimal specifications based on application and usage conditions. After confirming the usage methods and conditions, our engineers will design and create a custom-made solution from scratch.

Company：Matsumoto Machine Sales Co., Ltd.
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dehydrator for small metal parts such as nuts and screws.

A dehydrator for small metal parts such as nuts and screws, featuring a simple structure with only the essential functions, capable of smooth dehydration through centrifugal effects.

To efficiently dehydrate small metal parts such as nuts and screws, the rotation speed and movement can be controlled according to the product specifications. ◎ Excellent cleaning properties prevent contamination from foreign substances. (1) Casing opening and closing mechanism If there is no casing opening and closing mechanism, it is necessary to remove the bolts and lift the casing for internal cleaning. (2) Basket flat If the basket is not flat, it is necessary to remove the basket from the main shaft and lift it for cleaning the bottom of the basket. Thanks to the mechanisms in (1) and (2), what used to take a day for machine cleaning and confirmation can now be completed in about 2 hours, resulting in a time reduction of 91.6%. ◎ We propose the optimal operating method for removing moisture from small parts with complex shapes, such as screws and nuts, where water tends to accumulate in recesses, by determining the optimal rotation speed and direction through dehydration tests. ◎ We propose the best specifications tailored to your application and usage conditions. After confirming the usage methods and conditions, our engineers will design and create a custom solution from scratch.

Company：Matsumoto Machine Sales Co., Ltd.
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dehydrator for small plastic parts

A compact dewatering machine for small plastic parts, featuring a simple structure with the minimum necessary functions, capable of smooth dewatering due to centrifugal effects.

To efficiently dehydrate small plastic parts, the rotation speed and movement can be controlled according to the product specifications. ◎ Excellent cleaning properties prevent contamination. (1) Casing opening and closing mechanism If there is no casing opening and closing mechanism, it is necessary to remove bolts and lift the casing for internal cleaning. (2) Basket flatness If the basket is not flat, it is necessary to remove the basket from the main shaft and lift it for cleaning the bottom of the basket. Thanks to the mechanisms in (1) and (2), what used to take a day for machine cleaning and verification can now be completed in about 2 hours, resulting in a time reduction of 91.6%. ◎ We propose the optimal operating method for removing moisture from small parts with complex shapes that tend to accumulate water in recesses, based on dehydration tests that determine the best rotation speed and direction. ◎ We propose the optimal specifications tailored to your application and usage conditions. After confirming the usage methods and conditions, our engineers will design and create a custom solution from scratch.

Company：Matsumoto Machine Sales Co., Ltd.
Price：Other

centrifuge
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Garage shutter - overhead door / weather-resistant, wind pressure-resistant aluminum flat

For the garage that will be the "face" of the house, we chose a Congo overhead door. Its glossy aluminum flat texture and functionality that withstands strong winds are appealing.

The pure silver luster of the "Albard" captivates viewers. Its streamlined flat design matches various residential styles and harmonizes well with the surrounding streetscape. The high-grade aluminum is lightweight with a beautiful surface finish, and it excels in durability and weather resistance. Its opening and closing speed is faster than that of traditional shutters, and it operates quietly. In addition to the standard colors of silver and stainless steel, eight premium colors (powder coating) have been added. The paint used is free of organic solvents, making it environmentally friendly and safe for human health. By applying a design coating that matches the exterior walls, it results in a harmonious, striking, and presence-filled garage. ■ To prepare for large typhoons and strong winds, the wind pressure resistance has been increased to 1000Pa. *For more details, please download and view the catalog.

Company：KONGO INDUSTRIES CO.,LTD.
Price：Other

others
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Western-style mansion / Garage door "Raybird"

Coordinate the space with a perfect design balance between your home and car. A garage that stimulates a sense of playfulness with the joy of choosing colors and designs.

"Raybird," with its rich color variations and window design, is appealing. It is perfect for Western-style homes and unique garages. Enjoy coordinating it with your exterior and vehicle. It is a durable and cost-effective steel overhead door. It features a faster opening and closing speed than shutters, and operates quietly. *For more details, please download and view the catalog.*

Company：KONGO INDUSTRIES CO.,LTD.
Price：Other

others
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Residential Garage Door Fireproof Specification Mokubird (EC-0026-2)

【Fire Protection Equipment Certified】Fast opening and closing speed, quiet operation, and the texture of natural wood exudes a sense of luxury in an overdoor.

Fire protection equipment with quasi-fire-resistance performance installed in exterior wall openings in fire prevention areas, etc. can be set up without worrying about the distance from property boundaries or road centerlines, even in fire and quasi-fire prevention areas. The beautiful flat-finished natural wood exudes the warmth of real wood, gently enveloping your precious vehicle. *For more details, please contact us or refer to the catalog.

Company：KONGO INDUSTRIES CO.,LTD.
Price：Other

others
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Residential garage door, fire-resistant specification Mokubird, certification number: EB-1724

[Fire Protection Equipment Certified Product] Fast opening and closing speed, quiet operation, and the texture of natural wood exudes a sense of luxury in an overdoor.

Fire protection equipment with flame-resistant performance installed in exterior wall openings in fire prevention areas, etc. It can be installed in fire-resistant and quasi-fire-resistant buildings. The beautiful flat-finished natural wood exudes the warmth of real wood, gently enveloping your precious car. *For more details, please contact us or refer to the catalog.

Company：KONGO INDUSTRIES CO.,LTD.
Price：Other

others
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-silt clay water barrier construction method "Eco Clay Wall II Method"

A mud-free clay waterproof wall construction method that can create a waterproof wall with excellent durability and no deterioration of the wall body.

The "Eco Clay Wall II Method" is a waterproof wall construction method that uses clay minerals (EC wall material) as the main material, without the use of cement. This method involves mixing and stirring a small amount of drilling fluid with powdered EC wall material. As this powdered EC wall material absorbs water from the drilling fluid and swells, it generates no waste slurry, allowing for the creation of a waterproof wall with excellent long-term durability. 【Features】 ■ Long-term durability ■ High waterproofing performance ■ Reliability against earthquakes ■ Adsorption properties ■ Cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us.

Company：ライト工業
Price：Other

others
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Waste plastic washing and dewatering machine

Reduction of disposal costs! Resource waste can be utilized as feed, fertilizer, or for methane gas power generation.

We would like to introduce our "Waste Plastic Washing and Dewatering Machine." This machine serves three functions: sorting, washing, and screening, with over 1,200 units successfully implemented. By sorting, it can be converted into resources, reducing the amount of waste incineration and landfill. We offer a lineup that includes the "M755D" with a maximum capacity of 500 kg per hour, the "M552W" and "M552TW" with 300 kg capacity, and the "MK2208TW" with 1,500 kg capacity. We have various achievements and know-how beyond just food applications, so please feel free to consult with us. 【Features】 ■ Three functions in one: sorting, washing, and screening ■ Improved work efficiency through system proposals ■ Over 1,200 units successfully implemented *For more details, please refer to the PDF materials or feel free to contact us.

Company：極東貿易
Price：Other

Other cleaning machines
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oil-less air bearing

Achieving high precision, high speed, and ultra-low friction! High-performance, compact products.

The "Oiles Air Bearing" is a product that creates an air film between the shaft and the bearing, allowing for non-contact movement and providing various features. There is no stick-slip caused by solid friction, and it can also accommodate high-speed rotation. Thanks to its unique porous technology, it can achieve optimal throttling, demonstrating high load capacity and high rigidity. 【Features】 ■ Can be manufactured in various shapes ■ Capable of high rigidity specifications and high-speed specifications ■ Excellent safety and easy handling ■ Can reduce labor for air sources and lower running costs ■ Usable in clean rooms *For more details, please refer to the PDF materials or feel free to contact us.

Company：藤川伝導機
Price：Other

Metal bearings
Plastic bearings
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Container washing and dewatering machine [Labor-saving and CO2 reduction. Can be combined with robots!]

Dehydration using high-speed centrifugal force without steam for drying after cleaning. We also propose further labor-saving solutions incorporating robots and AGVs!

A cleaning and dewatering machine suitable for washing containers used for product delivery between supermarkets, convenience stores, centers, and factories. It uses low-pressure, high-water volume to thoroughly wash the containers, followed by a centrifugal dewatering method for effective dehydration. The cleaning capacity ranges from 450 to 2000 containers per hour. It can be designed and manufactured according to the specifications of the containers, the type of dirt, the number of items to be cleaned, and the installation space. 【Labor-saving】 By automating the processes before and after the cleaning machine, further labor savings can be achieved. We can propose solutions tailored to your needs, including stackers, unstackers, robots, and AGVs. 【CO2 Reduction】 Unlike hot air drying methods, the centrifugal dewatering method does not use steam, making it effective for CO2 reduction. Additionally, we recommend a wastewater heat recovery system that collects the wastewater used in cleaning and exchanges heat within the device to raise the temperature of tap water. *For more details, please contact us or download various catalogs.

Company：THE CREO CO., LTD.
Price：Other

Other cleaning machines
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-saving vegetable washing and dewatering machine

Perfect for small quantities of a variety of pre-cut vegetables! Complete the finishing process (washing, sterilizing, dehydrating) with just one machine!

This is a water-saving vegetable washing and dewatering machine ideal for small quantities of various cut vegetables. It allows for the final washing, sterilization, and dewatering processes to be completed in one machine while using the basket received from the slicer. 【Features】 - Washing, sterilization, and dewatering in the finishing process can be done with one machine - Ideal for small quantities of various cut vegetables - Two water supply systems are available *For more details, please refer to the PDF document or feel free to contact us.

Company：THE CREO CO., LTD.
Price：Other

Food Cleaning Equipment
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oricon cleaning and dewatering machine "DCN115+R301"

When the processing capacity of batch-type washing and dewatering machines is insufficient, we recommend a washing and dewatering system that combines a conveyor-type washer and a batch-type dewatering machine!

This is a system that cleans containers using a conveyor-type washing machine and then drains water with a batch-type dewatering machine. It is energy-efficient as it does not use thermal energy for dewatering. We design and manufacture according to the customer's containers, dirt, processing capacity, and installation space. Based on the cleaning methodology "TACT," we propose optimal cleaning. T = Cleaning Time A = Physical Action C = Chemical Action T = Cleaning Temperature [Features] ■ Sweeps away dirt with low pressure and high water volume ■ Water drainage through centrifugal dewatering method ■ Energy-efficient and quiet as it does not use thermal energy for dewatering *For more details, please refer to the PDF materials or feel free to contact us.

Company：THE CREO CO., LTD.
Price：Other

Other food machinery
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conveyor-type Oricon washing and dewatering machine

Clean the oricon thoroughly and centrifuge it at high speed! We also propose material handling equipment that contributes to "labor-saving," such as opening and closing devices and stacking devices for the oricon!

This is a conveyor-type container cleaning and dewatering machine. After thoroughly removing dirt with a low-pressure, high-water-volume method, it effectively drains water using a centrifugal dewatering method. We can also provide proposals that include handling equipment such as openers and closers that automatically open and close containers, as well as stackers and unstackers. We will design and manufacture according to your containers, the type of dirt, the number of items to be cleaned, and the installation space. Based on the cleaning methodology "TACT," we will propose suitable cleaning solutions. T = Cleaning Time A = Physical Action C = Chemical Action T = Cleaning Temperature [Features] ■ Thorough dirt removal with low-pressure, high-water-volume ■ Water drainage using centrifugal dewatering ■ Proposals for various handling equipment are also possible *For more details, please refer to the PDF document or feel free to contact us.

Company：THE CREO CO., LTD.
Price：Other

Other food machinery
Dehydrator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dehydrator Product List and Ranking from 153 Manufacturers, Suppliers and Companies | IPROS GMS

Dehydrator Manufacturer, Suppliers and Company Rankings

Dehydrator Product ranking