Drawing process Product List and Ranking from 40 Manufacturers, Suppliers and Companies

Spinning / Hera drawing, processing of materials such as aluminum, copper, and stainless steel.

The guideline is 30.0 tons of pure aluminum and 20.0 tons of alloy aluminum in the AL series, 15.0 tons of oxygen-free copper, 10.0 tons of SUS304, and 16.0 tons of SS material.

Our company has processed various materials over the years, leveraging our extensive experience and equipment advantages. We have a track record of processing materials such as aluminum-based, copper-based, stainless steel, and rare metals. Additionally, the thickness of materials that can be processed through drawing varies depending on processing conditions, shape, and size, but as a guideline, it is approximately 30.0t for pure aluminum and 20.0t for aluminum alloys, 15.0t for oxygen-free copper, 10.0t for SUS304, and 16.0t for SS materials. We also have well-equipped facilities for hot processing, and depending on the conditions, we can process even thicker materials. We will provide proposals tailored to your product applications and usage shapes. 【Drawing Processing Achievements (Excerpt)】 ■ Aluminum-based - Various types including A1100, A1050, A1070, A2017, A5052, A5083, A6061, etc. ■ Nickel and Nickel-based Alloys - Various types including nickel, Inconel, Hastelloy, Waspaloy, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Company：よろづしぼり製作所
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

No welding or riveting needed! High-strength stamping process.

By using high-intensity drawing processing for integrated molding, we achieve improved precision and reduced costs and man-hours! It also reduces the risks of tipping and falling out!

In a typical situation, when pinning is done, pins are crimped onto press-formed parts; however, since crimping is performed based on the press-formed hole, the positional accuracy of the holes and pins is poor, leading to risks of tilting and falling out, and it tends to be high-cost. At Tokushu Hatsuryou Kogyo, we have achieved significant cost reduction and improved precision by realizing integrated molding. Additionally, through high-strength drawing processing, we have improved the accuracy of positional and perpendicularity by integrating from coil material. 【VA Proposal Example】 ■ Method: Pin + Pressed Parts → Press Processing ■ Product Name: Bracket ■ Application: Transmission Parts *For more details, please refer to the catalog or feel free to contact us.

Company：特殊発條興業 (トクハツ)
Price：Other

Axle parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sheet Metal Processing] "Servo Press" also reduces costs for drawing processing!

Even general materials can be processed with drawing! The introduction of the press machine 'Servo Press' achieves a reduction in processing costs!

We would like to introduce the state-of-the-art press machine "Servo Press" introduced by Horiuchi Seisakusho, which specializes in sheet metal pressing, metal machining, and metal baking paint processing. This processing machine allows for precise movements that were not possible with conventional press machines. As a result, deep drawing that previously required high-cost materials can now be processed with standard materials. This also enables cost reduction! Additionally, we use the editing software "SMAPS," which allows for external setup of motions, boasting high productivity. 【Features】 ■ Deep drawing is possible even with standard materials ■ Reduction in processing costs *The downloadable material is an introduction to the Servo Press. *For more details, please feel free to contact us.

Company：堀内製作所
Price：Other

Processing Contract
Other processing machines
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Introduction: "Die Cutting"

It accommodates depths from 10mm to 10cm and diameters from 2cm to 20cm!

Our company specializes in the technology of "squeezing processing." By forming shapes without processes such as cutting or welding, we can reduce the number of processing steps. Additionally, since we do not perform cutting or welding, there is very little damage to the material, resulting in a durable finish. 【Features】 ■ Reduction of processing steps ■ Ability to produce high-quality products ■ Expectation of significant work hardening *For more details, please feel free to contact us.

Company：谷内プレスワーク
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Taniuchi Press Work Co., Ltd. Company Profile

Flexible response and mobility! We handle all types of processing, including pressing and spot processing!

Since its establishment, Taniuchi Press Work Co., Ltd. has consistently held the belief of "improving manufacturing technology" and "pursuing customer satisfaction." To meet the various needs of our customers, we have been honing our skills. We are particularly confident in our "stamping" technology. We also offer processing techniques such as "deep drawing" and "step drawing," so if you have any requests, please feel free to consult with us. 【Business Activities】 ■ Press processing ■ Spot welding ■ TIG welding ■ Arc welding ■ Riveting *For more details, please refer to the PDF materials or feel free to contact us.

Company：谷内プレスワーク
Price：Other

Press Dies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aikyo Hela Press Industry Co., Ltd. Business Introduction

Affordable parts with rotational body shapes! The simple type demonstrates its power in prototype production, small lot products, and large products through deep drawing processing.

Aikyo Hela Press Industrial Co., Ltd. is a company located in Aichi Prefecture in the Chubu region, specializing in deep drawing processing, press processing, and mold design and manufacturing. Thin sheets for small lot production are processed by hand drawing, while thick sheets are processed using hydraulic spinning machines. In addition, for press processing, we continue to produce high-quality products under strict delivery management, honed through kanban delivery (automotive parts) from progressive processing up to 300 tons and single-stroke lines. 【Business Activities】 ■ Deep drawing and pressing ■ General sheet metal processing ■ Press mold manufacturing *For more details, please feel free to contact us.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Press Dies
Other Auto Parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Examples of "pipe" die stamping processing [Prototype and mass production available from 1 piece!]

Compared to pressed products, the precision of post-forming distortion and other factors is higher in draw forming processing. It requires low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. While the initial investment (such as mold costs) for press molds requires a concave-convex type, hemming primarily requires only a convex type. The cost of a hemming mold starts from 20,000 yen, while a press mold starts from 250,000 yen (for simple shapes), allowing for a very low initial investment, making it suitable for small-batch production of various types. Additionally, because the material is shaped by rotation, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-forming distortion compared to pressed products. [Example of Hemming Processing] Copper, thickness 2.0 mm (maximum outer diameter Φ70, total length 245) The right side of the pipe is a closed tube, and the left side has a reduction rate of 28%. Hot processing hemming. *For details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Examples of "taper" die drawing processing [Prototyping and mass production available from one piece!]

Compared to pressed products, the precision of post-molding distortion and other factors is higher in deep drawing processing. It requires low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. The initial investment (such as mold costs) for press molds requires a concave-convex type, while hemming only requires a basic convex type. The cost of a hemming mold starts at 20,000 yen, while a press mold starts at 250,000 yen (for simple shapes), allowing for a very low initial investment, making it suitable for small-batch production of various types. Additionally, because the material is rotated and drawn, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-forming distortions compared to pressed products. [Examples of Hemming Processing] Made of SUS, thickness 1.2 (maximum outer diameter Φ840, height 100) Edible seaweed, when freshly harvested, has sand and other particles attached. This is a tapered component for equipment that washes the seaweed by pouring it in. Drawing from a flat plate. *For more details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Examples of "gas equipment" with blade drawing processing [Prototype and mass production available from 1 piece!]

Compared to pressed products, the precision of post-molding distortion and other factors is high in draw forming processing. It requires low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. The initial investment (such as mold costs) for press molds requires a concave-convex type, whereas hemming only requires a basic convex type. The cost of a hemming mold starts at 20,000 yen, while a press mold starts at 250,000 yen (for simple shapes), allowing for a very low initial investment, making it suitable for small-batch production of various types. Additionally, because the material is rotated and drawn, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-forming distortions compared to pressed products. [Example of Hemming Processing] Aluminum, thickness 0.5 mm (maximum outer diameter Φ60, height 16) This is a prototype of a gas appliance part. After being drawn into a cap shape, the bottom and sides are cut off. *For details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Examples of 'watering can spout' spoon squeezing processing [Prototype and mass production available from 1 piece!]”

Compared to pressed products, the precision of post-molding distortion and other factors is high in draw forming processing. It has a low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. The initial investment (such as mold costs) for press molds requires a concave-convex type, whereas hemming only requires a basic convex type. The cost of a hemming mold starts at 20,000 yen, while a press mold starts at 250,000 yen (for simple shapes), allowing for a very low initial investment, making it suitable for small-batch production of various types. Additionally, because the material is rotated and drawn, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-forming distortions compared to pressed products. [Examples of Hemming Processing] Copper, t0.8 (maximum outer diameter Φ82, height 65) This is a professional-grade watering can spout, drawn from a flat plate. *For more details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study of "cover" blade squeezing processing [Prototype and mass production available from 1 piece!]

Compared to pressed products, the precision of post-forming distortion and other factors is higher in deep drawing processing. It requires low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. The initial investment (such as mold costs) for press molds requires a concave-convex type, whereas hemming only requires a basic convex type. The cost of a hemming mold starts at 20,000 yen, while a press mold starts at 250,000 yen (for simple shapes), allowing for a very low initial investment, making it suitable for small-batch production of various types. Additionally, because the material is rotated and drawn, it can reduce the stress in the rolling direction of the material, resulting in higher precision in post-shaping distortion compared to pressed products. 【Examples of Hemming Processing】 Made of SPHC, thickness 3.2 (maximum outer diameter Φ183, height 90) This is a cover for industrial equipment and specific parts. Ensuring the flatness of the wide flange is very challenging. It is drawn from a flat plate. *For details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Plate for spinning" examples of spatula squeezing processing [Prototyping and mass production available from 1 piece!]

Compared to pressed products, the precision of post-molding distortion and other factors is high in draw forming processing. It requires low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. The initial investment (such as mold costs) for press molds requires a concave-convex shape, while hemming primarily requires only a convex shape. The cost of a hemming mold starts at 20,000 yen, while a press mold starts at 250,000 yen (for simple shapes), allowing for a very low initial investment, making it suitable for small-batch production of various types. Additionally, because the material is rotated and drawn, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-forming distortions compared to pressed products. [Examples of Hemming Processing] Aluminum, t2.0 (maximum outer diameter Φ252, height 20) This is a plate for spinning, drawn from a flat sheet. *For details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Examples of "servo" blade drawing processing [Prototyping and mass production available from 1 piece!]

Compared to pressed products, the precision of post-molding distortions is higher in draw forming processing. It requires low initial investment and is suitable for small-batch production of various types. [Case study materials available]

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. The initial investment (such as mold costs) for press molds requires a concave-convex type, while hemming only requires a basic convex type. The cost of a hemming mold starts at 20,000 yen, while a press mold starts at 250,000 yen (for simple shapes), making the initial investment very low and suitable for small-batch production of various types. Additionally, because the material is rotated and drawn, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-forming distortions compared to pressed products. [Examples of Hemming Processing] Press processed products 300-ton W crank servo. Equipment available up to the press machine. Number of press machines: 20 *For details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A new option for reducing die costs in press processing: "Spinning Processing" *Data available.

Presenting materials summarizing the basics of spooning processing! Significantly reduce mold costs for 'small lot production of various types' compared to press processing! High precision in post-molding distortion and high quality.

In metal processing, "press processing" is often adopted, but in the case of "small lot production of many varieties," the high cost of molds becomes a drawback... ⇒ Did you know that this issue can be resolved with a method called "spinning"? "Spinning" is a processing method where the material is fitted into a rotating mold, and a rod-like tool is pressed against it to deform it like a lathe. While press processing requires two molds with concave and convex shapes, spinning only requires a convex mold, which helps reduce initial investment. Additionally, because it can reduce the stress in the rolling direction of the material, it offers higher precision in terms of distortion and other factors after forming compared to press-processed products. ★ Currently, we are offering a free document that explains the basics of "spinning." It introduces the advantages compared to press processing, basic processes, and examples of main components used. *The document can be viewed via the "PDF Download" link below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract
Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low-cost, small-batch production suitable for industrial equipment parts using deep drawing processing.

You can significantly reduce initial investment because a die (mold) for press processing is not required! We can accommodate from one piece for prototypes to mass production.

Hemming is a method of shaping metal sheets by rotating them to form a rotational body shape. We have various processing achievements in the field of industrial equipment parts. <Examples of Processing Achievements> Servo covers, trays, custom parts, etc. One feature of this processing is that the initial investment (such as mold costs) requires a concave mold for press molds, while hemming only requires a convex mold. The cost of a hemming mold starts from 20,000 yen, while a press mold starts from 250,000 yen (for simple shapes), making the initial investment very low and suitable for small-batch production of various types. Additionally, because the material is shaped by rotation, the stress in the rolling direction of the material can be reduced, resulting in higher precision in post-shaping distortion compared to pressed products. <Examples of Hemming Processing> Made of SUS, thickness 1.6 (maximum outer diameter Φ250, height 250) This product is shaped from a Φ256 pipe. It is an outlet from an irrigation channel. *For more details on various processing examples, please refer to the "PDF Download" below.

Company：愛巧ヘラ押工業本社工場
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drawing process Product List and Ranking from 40 Manufacturers, Suppliers and Companies

Drawing process Manufacturer, Suppliers and Company Rankings

Drawing process Product ranking